| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191009135500.ufkxcemccwfcfys7@M43218.corp.atmel.com>
Date: Wed, 9 Oct 2019 15:55:00 +0200
From: Ludovic Desroches <ludovic.desroches@...rochip.com>
To: Kamel Bouhara <kamel.bouhara@...tlin.com>
CC: Wolfram Sang <wsa@...-dreams.de>, <linux-i2c@...r.kernel.org>,
<linux-kernel@...r.kernel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
<linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>,
"Thomas Petazzoni" <thomas.petazzoni@...tlin.com>
Subject: Re: [PATCH 2/4] i2c: at91: implement i2c bus recovery
On Wed, Oct 02, 2019 at 04:46:56PM +0200, Kamel Bouhara wrote:
> External E-Mail
>
>
> Implement i2c bus recovery when slaves devices might hold SDA low.
> In this case re-assign SCL/SDA to gpios and issue 9 dummy clock pulses
> until the slave release SDA.
>
Hi Kamel,
Thanks for adding this new feature. As I see patches only for sama5d3 and
sama5d4, I assume it has not been tested with a sama5d2, isn't it?
I doubt it works with a sama5d2 because of the pinctrl. I also wonder if it can
work if we add .strict = true to pinmux_ops which is something plan for the
future...
Are you able to test these points? It would be nice to be aware of
possible side effects.
Regards
Ludovic
> Signed-off-by: Kamel Bouhara <kamel.bouhara@...tlin.com>
> ---
> drivers/i2c/busses/i2c-at91-master.c | 63 ++++++++++++++++++++++++++++
> drivers/i2c/busses/i2c-at91.h | 8 ++++
> 2 files changed, 71 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
> index a3fcc35ffd3b..df5bb93f952d 100644
> --- a/drivers/i2c/busses/i2c-at91-master.c
> +++ b/drivers/i2c/busses/i2c-at91-master.c
> @@ -18,11 +18,13 @@
> #include <linux/dma-mapping.h>
> #include <linux/dmaengine.h>
> #include <linux/err.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> #include <linux/io.h>
> #include <linux/of.h>
> #include <linux/of_device.h>
> +#include <linux/pinctrl/consumer.h>
> #include <linux/platform_device.h>
> #include <linux/platform_data/dma-atmel.h>
> #include <linux/pm_runtime.h>
> @@ -768,6 +770,63 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
> return ret;
> }
>
> +static void at91_prepare_twi_recovery(struct i2c_adapter *adap)
> +{
> + struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> +
> + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_gpio);
> +}
> +
> +static void at91_unprepare_twi_recovery(struct i2c_adapter *adap)
> +{
> + struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> +
> + pinctrl_select_state(dev->pinctrl, dev->pinctrl_pins_default);
> +}
> +
> +static int at91_init_twi_recovery_info(struct platform_device *pdev,
> + struct at91_twi_dev *dev)
> +{
> + struct i2c_bus_recovery_info *rinfo = &dev->rinfo;
> +
> + dev->pinctrl = devm_pinctrl_get(&pdev->dev);
> + if (!dev->pinctrl || IS_ERR(dev->pinctrl)) {
> + dev_info(dev->dev, "can't get pinctrl, bus recovery not supported\n");
> + return PTR_ERR(dev->pinctrl);
> + }
> +
> + dev->pinctrl_pins_default = pinctrl_lookup_state(dev->pinctrl,
> + PINCTRL_STATE_DEFAULT);
> + dev->pinctrl_pins_gpio = pinctrl_lookup_state(dev->pinctrl,
> + "gpio");
> + rinfo->sda_gpiod = devm_gpiod_get(&pdev->dev, "sda", GPIOD_IN);
> + if (PTR_ERR(rinfo->sda_gpiod) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + rinfo->scl_gpiod = devm_gpiod_get(&pdev->dev, "scl",
> + GPIOD_OUT_HIGH_OPEN_DRAIN);
> + if (PTR_ERR(rinfo->scl_gpiod) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + if (IS_ERR(rinfo->sda_gpiod) ||
> + IS_ERR(rinfo->scl_gpiod) ||
> + IS_ERR(dev->pinctrl_pins_default) ||
> + IS_ERR(dev->pinctrl_pins_gpio)) {
> + dev_info(&pdev->dev, "recovery information incomplete\n");
> + return -EINVAL;
> + }
> +
> + dev_info(&pdev->dev, "using scl%s for recovery\n",
> + rinfo->sda_gpiod ? ",sda" : "");
> +
> + rinfo->prepare_recovery = at91_prepare_twi_recovery;
> + rinfo->unprepare_recovery = at91_unprepare_twi_recovery;
> + rinfo->recover_bus = i2c_generic_scl_recovery;
> + dev->adapter.bus_recovery_info = rinfo;
> +
> + return 0;
> +}
> +
> int at91_twi_probe_master(struct platform_device *pdev,
> u32 phy_addr, struct at91_twi_dev *dev)
> {
> @@ -795,6 +854,10 @@ int at91_twi_probe_master(struct platform_device *pdev,
>
> at91_calc_twi_clock(dev);
>
> + rc = at91_init_twi_recovery_info(pdev, dev);
> + if (rc == -EPROBE_DEFER)
> + return rc;
> +
> dev->adapter.algo = &at91_twi_algorithm;
> dev->adapter.quirks = &at91_twi_quirks;
>
> diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
> index 499b506f6128..b89dab55e776 100644
> --- a/drivers/i2c/busses/i2c-at91.h
> +++ b/drivers/i2c/busses/i2c-at91.h
> @@ -141,6 +141,10 @@ struct at91_twi_dev {
> u32 fifo_size;
> struct at91_twi_dma dma;
> bool slave_detected;
> + struct i2c_bus_recovery_info rinfo;
> + struct pinctrl *pinctrl;
> + struct pinctrl_state *pinctrl_pins_default;
> + struct pinctrl_state *pinctrl_pins_gpio;
> #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
> unsigned smr;
> struct i2c_client *slave;
> @@ -158,6 +162,10 @@ void at91_init_twi_bus_master(struct at91_twi_dev *dev);
> int at91_twi_probe_master(struct platform_device *pdev, u32 phy_addr,
> struct at91_twi_dev *dev);
>
> +void at91_twi_prepare_recovery(struct i2c_adapter *adap);
> +void at91_twi_unprepare_recovery(struct i2c_adapter *adap);
> +void at91_twi_init_recovery_info(struct at91_twi_dev *dev);
> +
> #ifdef CONFIG_I2C_AT91_SLAVE_EXPERIMENTAL
> void at91_init_twi_bus_slave(struct at91_twi_dev *dev);
> int at91_twi_probe_slave(struct platform_device *pdev, u32 phy_addr,
> --
> 2.23.0
>
>
Powered by blists - more mailing lists