[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191011205127.4884-1-stuart.w.hayes@gmail.com>
Date: Fri, 11 Oct 2019 16:51:24 -0400
From: Stuart Hayes <stuart.w.hayes@...il.com>
To: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Austin Bolen <austin_bolen@...l.com>, keith.busch@...el.com,
Alexandru Gagniuc <mr.nuke.me@...il.com>,
"Rafael J . Wysocki" <rafael.j.wysocki@...el.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Andy Shevchenko <andy.shevchenko@...il.com>,
"Gustavo A . R . Silva" <gustavo@...eddedor.com>,
Sinan Kaya <okaya@...nel.org>,
Oza Pawandeep <poza@...eaurora.org>, linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org, lukas@...ner.de,
Stuart Hayes <stuart.w.hayes@...il.com>
Subject: [PATCH v2 0/3] PCI: pciehp: Do not turn off slot if presence comes up after link
In older PCIe specs, PDS (presence detect) would come up when the
"in-band" presence detect pin connected, and would be up before DLLLA
(link active).
In PCIe 4.0 (as an ECN) and in PCIe 5.0, there is a new bit to show if
in-band presence detection can be disabled for the slot, and another bit
that disables it--and a recommendation that it should be disabled if it
can be. In addition, certain OEMs disable in-band presence detection
without implementing these bits.
This means it is possible to get a "card present" interrupt after the
link is up and the driver is loaded. This causes an erroneous removal
of the device driver, followed by an immediate re-probing.
This patch set defines these new bits, uses them to disable in-band
presence detection if it can be, waits for PDS to go up if in-band
presence detection is disabled, and adds a DMI table that will let us
know if we should assume in-band presence is disabled on a system.
The first two patches in this set come from a patch set that was
submitted but not accepted many months ago by Alexandru Gagniuc [1].
The first is unmodified, the second has the commit message and timeout
modified.
[1] https://patchwork.kernel.org/cover/10909167/
[v3,0/4] PCI: pciehp: Do not turn off slot if presence comes up after link
v2:
- modify loop in pcie_wait_for_presence to do..while
Alexandru Gagniuc (2):
PCI: pciehp: Add support for disabling in-band presence
PCI: pciehp: Wait for PDS if in-band presence is disabled
Stuart Hayes (1):
PCI: pciehp: Add dmi table for in-band presence disabled
drivers/pci/hotplug/pciehp.h | 1 +
drivers/pci/hotplug/pciehp_hpc.c | 45 +++++++++++++++++++++++++++++++-
include/uapi/linux/pci_regs.h | 2 ++
3 files changed, 47 insertions(+), 1 deletion(-)
--
2.18.1
Powered by blists - more mailing lists