| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191011230721.206646-14-dmitry.torokhov@gmail.com>
Date: Fri, 11 Oct 2019 16:07:20 -0700
From: Dmitry Torokhov <dmitry.torokhov@...il.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>,
Heikki Krogerus <heikki.krogerus@...ux.intel.com>
Cc: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Linus Walleij <linus.walleij@...aro.org>,
Ard Biesheuvel <ard.biesheuvel@...aro.org>,
linux-acpi@...r.kernel.org, linux-kernel@...r.kernel.org,
platform-driver-x86@...r.kernel.org
Subject: [PATCH v5 13/14] platform/x86: intel_cht_int33fe: use inline reference properties
Now that static device properties allow defining reference properties
together with all other types of properties, instead of managing them
separately, let's adjust the driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@...il.com>
---
drivers/platform/x86/intel_cht_int33fe.c | 81 ++++++++++++------------
1 file changed, 41 insertions(+), 40 deletions(-)
diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index 1d5d877b9582..4177c5424931 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -46,30 +46,6 @@ struct cht_int33fe_data {
struct fwnode_handle *dp;
};
-static const struct software_node nodes[];
-
-static const struct software_node_ref_args pi3usb30532_ref = {
- &nodes[INT33FE_NODE_PI3USB30532]
-};
-
-static const struct software_node_ref_args dp_ref = {
- &nodes[INT33FE_NODE_DISPLAYPORT]
-};
-
-static struct software_node_ref_args mux_ref;
-
-static const struct software_node_reference usb_connector_refs[] = {
- { "orientation-switch", 1, &pi3usb30532_ref},
- { "mode-switch", 1, &pi3usb30532_ref},
- { "displayport", 1, &dp_ref},
- { }
-};
-
-static const struct software_node_reference fusb302_refs[] = {
- { "usb-role-switch", 1, &mux_ref},
- { }
-};
-
/*
* Grrr I severly dislike buggy BIOS-es. At least one BIOS enumerates
* the max17047 both through the INT33FE ACPI device (it is right there
@@ -105,8 +81,18 @@ static const struct property_entry max17047_props[] = {
{ }
};
+/*
+ * We are not using inline property here because those are constant,
+ * and we need to adjust this one at runtime to point to real
+ * software node.
+ */
+static struct software_node_ref_args fusb302_mux_refs[] = {
+ { .node = NULL },
+};
+
static const struct property_entry fusb302_props[] = {
PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
+ PROPERTY_ENTRY_REF_ARRAY("usb-role-switch", fusb302_mux_refs),
{ }
};
@@ -122,6 +108,8 @@ static const u32 snk_pdo[] = {
PDO_VAR(5000, 12000, 3000),
};
+static const struct software_node nodes[];
+
static const struct property_entry usb_connector_props[] = {
PROPERTY_ENTRY_STRING("data-role", "dual"),
PROPERTY_ENTRY_STRING("power-role", "dual"),
@@ -129,15 +117,21 @@ static const struct property_entry usb_connector_props[] = {
PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
+ PROPERTY_ENTRY_REF("orientation-switch",
+ &nodes[INT33FE_NODE_PI3USB30532]),
+ PROPERTY_ENTRY_REF("mode-switch",
+ &nodes[INT33FE_NODE_PI3USB30532]),
+ PROPERTY_ENTRY_REF("displayport",
+ &nodes[INT33FE_NODE_DISPLAYPORT]),
{ }
};
static const struct software_node nodes[] = {
- { "fusb302", NULL, fusb302_props, fusb302_refs },
+ { "fusb302", NULL, fusb302_props },
{ "max17047", NULL, max17047_props },
{ "pi3usb30532" },
{ "displayport" },
- { "connector", &nodes[0], usb_connector_props, usb_connector_refs },
+ { "connector", &nodes[0], usb_connector_props },
{ }
};
@@ -173,9 +167,10 @@ static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data)
{
software_node_unregister_nodes(nodes);
- if (mux_ref.node) {
- fwnode_handle_put(software_node_fwnode(mux_ref.node));
- mux_ref.node = NULL;
+ if (fusb302_mux_refs[0].node) {
+ fwnode_handle_put(
+ software_node_fwnode(fusb302_mux_refs[0].node));
+ fusb302_mux_refs[0].node = NULL;
}
if (data->dp) {
@@ -187,25 +182,31 @@ static void cht_int33fe_remove_nodes(struct cht_int33fe_data *data)
static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
{
+ const struct software_node *mux_ref_node;
int ret;
- ret = software_node_register_nodes(nodes);
- if (ret)
- return ret;
-
- /* The devices that are not created in this driver need extra steps. */
-
/*
* There is no ACPI device node for the USB role mux, so we need to wait
* until the mux driver has created software node for the mux device.
* It means we depend on the mux driver. This function will return
* -EPROBE_DEFER until the mux device is registered.
*/
- mux_ref.node = software_node_find_by_name(NULL, "intel-xhci-usb-sw");
- if (!mux_ref.node) {
- ret = -EPROBE_DEFER;
- goto err_remove_nodes;
- }
+ mux_ref_node = software_node_find_by_name(NULL, "intel-xhci-usb-sw");
+ if (!mux_ref_node)
+ return -EPROBE_DEFER;
+
+ /*
+ * Update node used in "usb-role-switch" property. Note that we
+ * rely on software_node_register_nodes() to use the original
+ * instance of properties instead of copying them.
+ */
+ fusb302_mux_refs[0].node = mux_ref_node;
+
+ ret = software_node_register_nodes(nodes);
+ if (ret)
+ return ret;
+
+ /* The devices that are not created in this driver need extra steps. */
/*
* The DP connector does have ACPI device node. In this case we can just
--
2.23.0.700.g56cf767bdb-goog
Powered by blists - more mailing lists