lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Fri, 11 Oct 2019 02:10:41 +0200
From:   Bartosz Golaszewski <bgolaszewski@...libre.com>
To:     Hui Song <hui.song_1@....com>
Cc:     Shawn Guo <shawnguo@...nel.org>, Li Yang <leoyang.li@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Linus Walleij <linus.walleij@...aro.org>,
        arm-soc <linux-arm-kernel@...ts.infradead.org>,
        linux-devicetree <devicetree@...r.kernel.org>,
        LKML <linux-kernel@...r.kernel.org>,
        linux-gpio <linux-gpio@...r.kernel.org>
Subject: Re: [PATCH v7] gpio/mpc8xxx: change irq handler from chained to normal

czw., 10 paź 2019 o 04:42 Hui Song <hui.song_1@....com> napisał(a):
>
> From: Song Hui <hui.song_1@....com>
>
> More than one gpio controllers can share one interrupt, change the
> driver to request shared irq.
>
> While this will work, it will mess up userspace accounting of the number
> of interrupts per second in tools such as vmstat.  The reason is that
> for every GPIO interrupt, /proc/interrupts records the count against GIC
> interrupt 68 or 69, as well as the GPIO itself.  So, for every GPIO
> interrupt, the total number of interrupts that the system has seen
> increments by two.
>
> Signed-off-by: Laurentiu Tudor <Laurentiu.Tudor@....com>
> Signed-off-by: Alex Marginean <alexandru.marginean@....com>
> Signed-off-by: Song Hui <hui.song_1@....com>
> ---
> Changes in v7:
>         - make unsigned int convert to unsigned long.
> Changes in v6:
>         - change request_irq to devm_request_irq and add commit message.
> Changes in v5:
>         - add traverse every bit function.
> Changes in v4:
>         - convert 'pr_err' to 'dev_err'.
> Changes in v3:
>         - update the patch description.
> Changes in v2:
>         - delete the compatible of ls1088a.
>  drivers/gpio/gpio-mpc8xxx.c | 29 +++++++++++++++++++----------
>  1 file changed, 19 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
> index 16a47de..5a0f030 100644
> --- a/drivers/gpio/gpio-mpc8xxx.c
> +++ b/drivers/gpio/gpio-mpc8xxx.c
> @@ -22,6 +22,7 @@
>  #include <linux/irq.h>
>  #include <linux/gpio/driver.h>
>  #include <linux/bitops.h>
> +#include <linux/interrupt.h>
>
>  #define MPC8XXX_GPIO_PINS      32
>
> @@ -127,20 +128,20 @@ static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
>                 return -ENXIO;
>  }
>
> -static void mpc8xxx_gpio_irq_cascade(struct irq_desc *desc)
> +static irqreturn_t mpc8xxx_gpio_irq_cascade(int irq, void *data)
>  {
> -       struct mpc8xxx_gpio_chip *mpc8xxx_gc = irq_desc_get_handler_data(desc);
> -       struct irq_chip *chip = irq_desc_get_chip(desc);
> +       struct mpc8xxx_gpio_chip *mpc8xxx_gc = data;
>         struct gpio_chip *gc = &mpc8xxx_gc->gc;
> -       unsigned int mask;
> +       unsigned long mask;
> +       int i;
>
>         mask = gc->read_reg(mpc8xxx_gc->regs + GPIO_IER)
>                 & gc->read_reg(mpc8xxx_gc->regs + GPIO_IMR);
> -       if (mask)
> +       for_each_set_bit(i, &mask, 32)
>                 generic_handle_irq(irq_linear_revmap(mpc8xxx_gc->irq,
> -                                                    32 - ffs(mask)));
> -       if (chip->irq_eoi)
> -               chip->irq_eoi(&desc->irq_data);
> +                                                    31 - i));

This will now fit in 80 characters.

Bart

> +
> +       return IRQ_HANDLED;
>  }
>
>  static void mpc8xxx_irq_unmask(struct irq_data *d)
> @@ -409,8 +410,16 @@ static int mpc8xxx_probe(struct platform_device *pdev)
>         if (devtype->gpio_dir_in_init)
>                 devtype->gpio_dir_in_init(gc);
>
> -       irq_set_chained_handler_and_data(mpc8xxx_gc->irqn,
> -                                        mpc8xxx_gpio_irq_cascade, mpc8xxx_gc);
> +       ret = devm_request_irq(&pdev->dev, mpc8xxx_gc->irqn,
> +                              mpc8xxx_gpio_irq_cascade,
> +                              IRQF_NO_THREAD | IRQF_SHARED, "gpio-cascade",
> +                              mpc8xxx_gc);
> +       if (ret) {
> +               dev_err(&pdev->dev, "%s: failed to devm_request_irq(%d), ret = %d\n",
> +                       np->full_name, mpc8xxx_gc->irqn, ret);
> +               goto err;
> +       }
> +
>         return 0;
>  err:
>         iounmap(mpc8xxx_gc->regs);
> --
> 2.9.5
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ