linux-kernel - [PATCH v4 1/8] iio: adc: max1027: Add debugfs register read support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191011144347.19146-2-miquel.raynal@bootlin.com>
Date:   Fri, 11 Oct 2019 16:43:40 +0200
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Jonathan Cameron <jic23@...nel.org>,
        Hartmut Knaack <knaack.h@....de>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Peter Meerwald-Stadler <pmeerw@...erw.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     <devicetree@...r.kernel.org>, linux-iio@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
        Miquel Raynal <miquel.raynal@...tlin.com>
Subject: [PATCH v4 1/8] iio: adc: max1027: Add debugfs register read support

Until now, only write operations were supported. Force two bytes read
operation when reading, which should fit most of the development
purposes. Of course, extended operations like buffered reads on
multiple channels or even temperature + voltage reads will not be read
entirely. Usually, just starting a new operation will work but in any
case a software reset (done through the debufs interface too) will
return the device in a usable state.

Signed-off-by: Miquel Raynal <miquel.raynal@...tlin.com>
---
 drivers/iio/adc/max1027.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
index 214883458582..6cdfe9ef73fc 100644
--- a/drivers/iio/adc/max1027.c
+++ b/drivers/iio/adc/max1027.c
@@ -309,8 +309,11 @@ static int max1027_debugfs_reg_access(struct iio_dev *indio_dev,
 	struct max1027_state *st = iio_priv(indio_dev);
 	u8 *val = (u8 *)st->buffer;
 
-	if (readval != NULL)
-		return -EINVAL;
+	if (readval) {
+		int ret = spi_read(st->spi, val, 2);
+		*readval = be16_to_cpu(st->buffer[0]);
+		return ret;
+	}
 
 	*val = (u8)writeval;
 	return spi_write(st->spi, val, 1);
-- 
2.20.1