linux-kernel - Re: [PATCH v2] drm/msm/dsi: Implement reset correctly

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20191011180722.GU85762@art_vandelay>
Date:   Fri, 11 Oct 2019 14:07:22 -0400
From:   Sean Paul <sean@...rly.run>
To:     Jeffrey Hugo <jeffrey.l.hugo@...il.com>
Cc:     robdclark@...il.com, sean@...rly.run, airlied@...ux.ie,
        daniel@...ll.ch, linux-arm-msm@...r.kernel.org,
        dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] drm/msm/dsi: Implement reset correctly

On Fri, Oct 11, 2019 at 06:39:39AM -0700, Jeffrey Hugo wrote:
> On msm8998, vblank timeouts are observed because the DSI controller is not
> reset properly, which ends up stalling the MDP.  This is because the reset
> logic is not correct per the hardware documentation.
> 
> The documentation states that after asserting reset, software should wait
> some time (no indication of how long), or poll the status register until it
> returns 0 before deasserting reset.
> 
> wmb() is insufficient for this purpose since it just ensures ordering, not
> timing between writes.  Since asserting and deasserting reset occurs on the
> same register, ordering is already guaranteed by the architecture, making
> the wmb extraneous.
> 
> Since we would define a timeout for polling the status register to avoid a
> possible infinite loop, lets just use a static delay of 20 ms, since 16.666
> ms is the time available to process one frame at 60 fps.
> 
> Fixes: a689554ba6ed (drm/msm: Initial add DSI connector support)
> Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@...il.com>

Pushed to drm-misc-fixes for 5.4

Thanks!

Sean

> Reviewed-by: Sean Paul <sean@...rly.run>
> ---
> 
> v2:
> -make a DEFINE for the delay
> 
>  drivers/gpu/drm/msm/dsi/dsi_host.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c
> index 663ff9f4fac9..9a81705301c6 100644
> --- a/drivers/gpu/drm/msm/dsi/dsi_host.c
> +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c
> @@ -26,6 +26,8 @@
>  #include "dsi_cfg.h"
>  #include "msm_kms.h"
>  
> +#define RESET_DELAY 20
> +
>  static int dsi_get_version(const void __iomem *base, u32 *major, u32 *minor)
>  {
>  	u32 ver;
> @@ -986,7 +988,7 @@ static void dsi_sw_reset(struct msm_dsi_host *msm_host)
>  	wmb(); /* clocks need to be enabled before reset */
>  
>  	dsi_write(msm_host, REG_DSI_RESET, 1);
> -	wmb(); /* make sure reset happen */
> +	msleep(RESET_DELAY); /* make sure reset happen */
>  	dsi_write(msm_host, REG_DSI_RESET, 0);
>  }
>  
> @@ -1396,7 +1398,7 @@ static void dsi_sw_reset_restore(struct msm_dsi_host *msm_host)
>  
>  	/* dsi controller can only be reset while clocks are running */
>  	dsi_write(msm_host, REG_DSI_RESET, 1);
> -	wmb();	/* make sure reset happen */
> +	msleep(RESET_DELAY);	/* make sure reset happen */
>  	dsi_write(msm_host, REG_DSI_RESET, 0);
>  	wmb();	/* controller out of reset */
>  	dsi_write(msm_host, REG_DSI_CTRL, data0);
> -- 
> 2.17.1
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS