linux-kernel - [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191014112558.3881-1-biwen.li@nxp.com>
Date:   Mon, 14 Oct 2019 19:25:57 +0800
From:   Biwen Li <biwen.li@....com>
To:     peda@...ntia.se, leoyang.li@....com, robh+dt@...nel.org,
        mark.rutland@....com
Cc:     linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, Biwen Li <biwen.li@....com>
Subject: [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect

This replaces property i2c-mux-idle-disconnect with idle-state

Signed-off-by: Biwen Li <biwen.li@....com>
---
 Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index 30ac6a60f041..f2db517b1635 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -25,9 +25,7 @@ Required Properties:
 Optional Properties:
 
   - reset-gpios: Reference to the GPIO connected to the reset input.
-  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
-    children in idle state. This is necessary for example, if there are several
-    multiplexers on the bus and the devices behind them use same I2C addresses.
+  - idle-state: Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
   - interrupts: Interrupt mapping for IRQ.
   - interrupt-controller: Marks the device node as an interrupt controller.
   - #interrupt-cells : Should be two.
-- 
2.17.1