linux-kernel - Re: [PATCH v4 2/5] phy: tegra: xusb: Add Tegra194 support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191014131225.GE422231@ulmo>
Date:   Mon, 14 Oct 2019 15:12:25 +0200
From:   Thierry Reding <thierry.reding@...il.com>
To:     JC Kuo <jckuo@...dia.com>
Cc:     gregkh@...uxfoundation.org, jonathanh@...dia.com, kishon@...com,
        linux-tegra@...r.kernel.org, linux-usb@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        nkristam@...dia.com
Subject: Re: [PATCH v4 2/5] phy: tegra: xusb: Add Tegra194 support

On Wed, Oct 09, 2019 at 10:43:40AM +0800, JC Kuo wrote:
> Add support for the XUSB pad controller found on Tegra194 SoCs. It is
> mostly similar to the same IP found on Tegra186, but the number of
> pads exposed differs, as do the programming sequences. Because most of
> the Tegra194 XUSB PADCTL registers definition and programming sequence
> are the same as Tegra186, Tegra194 XUSB PADCTL can share the same
> driver, xusb-tegra186.c, with Tegra186 XUSB PADCTL.
> 
> Tegra194 XUSB PADCTL supports up to USB 3.1 Gen 2 speed, however, it
> is possible for some platforms have long signal trace that could not
> provide sufficient electrical environment for Gen 2 speed. This patch
> introduce a new device node property "nvidia,disable-gen2" that can
> be used to specifically disable Gen 2 speed for a particular USB 3.0
> port so that the port can be limited to Gen 1 speed and avoid the
> instability.
> 
> Signed-off-by: JC Kuo <jckuo@...dia.com>
> ---
> Changes in v4: none
> Changes in v3: none
> Changes in v2:
> - removed unnecessary #if/#endif pairs
> - introduce new soc->supports_gen2 flag which indicate whether or not
>   a soc supports USB 3.1 Gen 2 speed
> 
>  drivers/phy/tegra/Makefile        |  1 +
>  drivers/phy/tegra/xusb-tegra186.c | 74 +++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.c          |  7 +++
>  drivers/phy/tegra/xusb.h          |  6 +++
>  4 files changed, 88 insertions(+)

Acked-by: Thierry Reding <treding@...dia.com>

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)