linux-kernel - Re: [PATCH v4 4/7] arm64: dts: actions: Add uSD and eMMC support for Bubblegum96

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191014144503.GB8583@mani>
Date:   Mon, 14 Oct 2019 20:15:03 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     ulf.hansson@...aro.org, afaerber@...e.de, robh+dt@...nel.org,
        sboyd@...nel.org
Cc:     linux-arm-kernel@...ts.infradead.org, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        thomas.liau@...ions-semi.com, linux-actions@...ts.infradead.org,
        linus.walleij@...aro.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH v4 4/7] arm64: dts: actions: Add uSD and eMMC support for
 Bubblegum96

On Mon, Sep 16, 2019 at 09:15:43PM +0530, Manivannan Sadhasivam wrote:
> Add uSD and eMMC support for Bubblegum96 board based on Actions Semi
> S900 SoC. SD0 is connected to uSD slot and SD2 is connected to eMMC.
> Since there is no PMIC support added yet, fixed regulator has been
> used as a regulator node.
> 
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>

Applied for v5.5.

Thanks,
Mani

> ---
>  .../boot/dts/actions/s900-bubblegum-96.dts    | 62 +++++++++++++++++++
>  1 file changed, 62 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
> index 732daaa6e9d3..59291e0ea1ee 100644
> --- a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
> +++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
> @@ -12,6 +12,9 @@
>  	model = "Bubblegum-96";
>  
>  	aliases {
> +		mmc0 = &mmc0;
> +		mmc1 = &mmc1;
> +		mmc2 = &mmc2;
>  		serial5 = &uart5;
>  	};
>  
> @@ -23,6 +26,24 @@
>  		device_type = "memory";
>  		reg = <0x0 0x0 0x0 0x80000000>;
>  	};
> +
> +	/* Fixed regulator used in the absence of PMIC */
> +	vcc_3v1: vcc-3v1 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.1V";
> +		regulator-min-microvolt = <3100000>;
> +		regulator-max-microvolt = <3100000>;
> +		regulator-always-on;
> +	};
> +
> +	/* Fixed regulator used in the absence of PMIC */
> +	sd_vcc: sd-vcc {
> +		compatible = "regulator-fixed";
> +		regulator-name = "fixed-3.1V";
> +		regulator-min-microvolt = <3100000>;
> +		regulator-max-microvolt = <3100000>;
> +		regulator-always-on;
> +	};
>  };
>  
>  &i2c0 {
> @@ -241,6 +262,47 @@
>  			bias-pull-up;
>  		};
>  	};
> +
> +	mmc0_default: mmc0_default {
> +		pinmux {
> +			groups = "sd0_d0_mfp", "sd0_d1_mfp", "sd0_d2_d3_mfp",
> +				 "sd0_cmd_mfp", "sd0_clk_mfp";
> +			function = "sd0";
> +		};
> +	};
> +
> +	mmc2_default: mmc2_default {
> +		pinmux {
> +			groups = "nand0_d0_ceb3_mfp";
> +			function = "sd2";
> +		};
> +	};
> +};
> +
> +/* uSD */
> +&mmc0 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc0_default>;
> +	no-sdio;
> +	no-mmc;
> +	no-1-8-v;
> +	cd-gpios = <&pinctrl 120 GPIO_ACTIVE_LOW>;
> +	bus-width = <4>;
> +	vmmc-supply = <&sd_vcc>;
> +	vqmmc-supply = <&sd_vcc>;
> +};
> +
> +/* eMMC */
> +&mmc2 {
> +	status = "okay";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&mmc2_default>;
> +	no-sdio;
> +	no-sd;
> +	non-removable;
> +	bus-width = <8>;
> +	vmmc-supply = <&vcc_3v1>;
>  };
>  
>  &timer {
> -- 
> 2.17.1
>