[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <b5da1f015a4dd87a612e1a9e57fdca7a@agner.ch>
Date: Mon, 14 Oct 2019 22:24:51 +0200
From: Stefan Agner <stefan@...er.ch>
To: Robert Chiras <robert.chiras@....com>
Cc: Guido Günther <agx@...xcpu.org>,
Marek Vasut <marex@...x.de>, David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
NXP Linux Team <linux-imx@....com>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 02/14] drm/mxsfb: Read bus flags from bridge if present
On 2019-08-29 13:30, Robert Chiras wrote:
> From: Guido Günther <agx@...xcpu.org>
>
> The bridge might have special requirmentes on the input bus. This
> is e.g. used by the imx-nwl bridge.
>
> Signed-off-by: Guido Günther <agx@...xcpu.org>
> Reviewed-by: Stefan Agner <stefan@...er.ch>
Applied to the drm-misc-next branch.
I decided to apply those two since they are independent from the rest.
You can drop them in the next spin of the rest.
--
Stefan
> ---
> drivers/gpu/drm/mxsfb/mxsfb_crtc.c | 5 ++++-
> 1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> index de09b93..b69ace8 100644
> --- a/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> +++ b/drivers/gpu/drm/mxsfb/mxsfb_crtc.c
> @@ -209,7 +209,7 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
> {
> struct drm_device *drm = mxsfb->pipe.crtc.dev;
> struct drm_display_mode *m = &mxsfb->pipe.crtc.state->adjusted_mode;
> - const u32 bus_flags = mxsfb->connector->display_info.bus_flags;
> + u32 bus_flags = mxsfb->connector->display_info.bus_flags;
> u32 vdctrl0, vsync_pulse_len, hsync_pulse_len;
> int err;
>
> @@ -233,6 +233,9 @@ static void mxsfb_crtc_mode_set_nofb(struct
> mxsfb_drm_private *mxsfb)
>
> clk_set_rate(mxsfb->clk, m->crtc_clock * 1000);
>
> + if (mxsfb->bridge && mxsfb->bridge->timings)
> + bus_flags = mxsfb->bridge->timings->input_bus_flags;
> +
> DRM_DEV_DEBUG_DRIVER(drm->dev, "Pixel clock: %dkHz (actual: %dkHz)\n",
> m->crtc_clock,
> (int)(clk_get_rate(mxsfb->clk) / 1000));
Powered by blists - more mailing lists