linux-kernel - Re: [PATCH v6 3/5] serial: fsl_linflexuart: Be consistent with the name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191015190155.GA1140159@kroah.com>
Date:   Tue, 15 Oct 2019 21:01:55 +0200
From:   Greg KH <gregkh@...uxfoundation.org>
To:     Stefan-Gabriel Mirea <stefan-gabriel.mirea@....com>
Cc:     corbet@....net, robh+dt@...nel.org, mark.rutland@....com,
        catalin.marinas@....com, will@...nel.org, shawnguo@...nel.org,
        leoyang.li@....com, jslaby@...e.com, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-serial@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v6 3/5] serial: fsl_linflexuart: Be consistent with the
 name

On Thu, Oct 10, 2019 at 07:52:26PM +0300, Stefan-Gabriel Mirea wrote:
> For consistency reasons, spell the controller name as "LINFlexD" in
> comments and documentation.
> 
> Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@....com>
> ---
>  Documentation/admin-guide/kernel-parameters.txt | 2 +-
>  drivers/tty/serial/Kconfig                      | 8 ++++----
>  drivers/tty/serial/fsl_linflexuart.c            | 4 ++--
>  include/uapi/linux/serial_core.h                | 2 +-
>  4 files changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> index c7ac2f3ac99f..666326d74415 100644
> --- a/Documentation/admin-guide/kernel-parameters.txt
> +++ b/Documentation/admin-guide/kernel-parameters.txt
> @@ -1101,7 +1101,7 @@
>  			mapped with the correct attributes.
>  
>  		linflex,<addr>
> -			Use early console provided by Freescale LinFlex UART
> +			Use early console provided by Freescale LINFlexD UART
>  			serial driver for NXP S32V234 SoCs. A valid base
>  			address must be provided, and the serial port must
>  			already be setup and configured.
> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> index 4789b5d62f63..c8e11f62ea19 100644
> --- a/drivers/tty/serial/Kconfig
> +++ b/drivers/tty/serial/Kconfig
> @@ -1391,19 +1391,19 @@ config SERIAL_FSL_LPUART_CONSOLE
>  	  you can make it the console by answering Y to this option.
>  
>  config SERIAL_FSL_LINFLEXUART
> -	tristate "Freescale linflexuart serial port support"
> +	tristate "Freescale LINFlexD UART serial port support"
>  	depends on PRINTK
>  	select SERIAL_CORE
>  	help
> -	  Support for the on-chip linflexuart on some Freescale SOCs.
> +	  Support for the on-chip LINFlexD UART on some Freescale SOCs.
>  
>  config SERIAL_FSL_LINFLEXUART_CONSOLE
> -	bool "Console on Freescale linflexuart serial port"
> +	bool "Console on Freescale LINFlexD UART serial port"
>  	depends on SERIAL_FSL_LINFLEXUART=y
>  	select SERIAL_CORE_CONSOLE
>  	select SERIAL_EARLYCON
>  	help
> -	  If you have enabled the linflexuart serial port on the Freescale
> +	  If you have enabled the LINFlexD UART serial port on the Freescale
>  	  SoCs, you can make it the console by answering Y to this option.
>  
>  config SERIAL_CONEXANT_DIGICOLOR
> diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
> index 68d74f2b5106..2d39e13176e1 100644
> --- a/drivers/tty/serial/fsl_linflexuart.c
> +++ b/drivers/tty/serial/fsl_linflexuart.c
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0-or-later
>  /*
> - * Freescale linflexuart serial port driver
> + * Freescale LINFlexD UART serial port driver
>   *
>   * Copyright 2012-2016 Freescale Semiconductor, Inc.
>   * Copyright 2017-2018 NXP
> @@ -933,5 +933,5 @@ static void __exit linflex_serial_exit(void)
>  module_init(linflex_serial_init);
>  module_exit(linflex_serial_exit);
>  
> -MODULE_DESCRIPTION("Freescale linflex serial port driver");
> +MODULE_DESCRIPTION("Freescale LINFlexD serial port driver");
>  MODULE_LICENSE("GPL v2");
> diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
> index 0f4f87a6fd54..49e61963e754 100644
> --- a/include/uapi/linux/serial_core.h
> +++ b/include/uapi/linux/serial_core.h
> @@ -290,7 +290,7 @@
>  /* Sunix UART */
>  #define PORT_SUNIX	121
>  
> -/* Freescale Linflex UART */
> +/* Freescale LINFlexD UART */
>  #define PORT_LINFLEXUART	121
>  
>  #endif /* _UAPILINUX_SERIAL_CORE_H */
> -- 
> 2.22.0
> 

This patch does not apply to my tree :(