| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1571166922.15362.19.camel@HansenPartnership.com>
Date: Tue, 15 Oct 2019 15:15:22 -0400
From: James Bottomley <James.Bottomley@...senPartnership.com>
To: Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-scsi <linux-scsi@...r.kernel.org>,
linux-kernel <linux-kernel@...r.kernel.org>
Subject: [GIT PULL] SCSI fixes for 5.4-rc3
Five changes, two in drivers (qla2xxx, zfcp), one to MAINTAINERS
(qla2xxx) and two in the core. The last two are mostly about removing
incorrect messages from the kernel log: the resid message is definitely
wrong and the sync cache on protected drive problem is arguably wrong.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Damien Le Moal (1):
scsi: core: save/restore command resid for error handling
Daniel Wagner (1):
scsi: qla2xxx: Remove WARN_ON_ONCE in qla2x00_status_cont_entry()
Himanshu Madhani (1):
scsi: MAINTAINERS: Update qla2xxx driver
Oliver Neukum (1):
scsi: sd: Ignore a failure to sync cache due to lack of authorization
Steffen Maier (1):
scsi: zfcp: fix reaction on bit error threshold notification
And the diffstat:
MAINTAINERS | 2 +-
drivers/s390/scsi/zfcp_fsf.c | 16 +++++++++++++---
drivers/scsi/qla2xxx/qla_isr.c | 2 --
drivers/scsi/scsi_error.c | 3 +++
drivers/scsi/sd.c | 3 ++-
include/scsi/scsi_eh.h | 1 +
6 files changed, 20 insertions(+), 7 deletions(-)
With full diff below.
James
---
diff --git a/MAINTAINERS b/MAINTAINERS
index 783569e3c4b4..91f33522393a 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13184,7 +13184,7 @@ S: Maintained
F: drivers/scsi/qla1280.[ch]
QLOGIC QLA2XXX FC-SCSI DRIVER
-M: qla2xxx-upstream@...gic.com
+M: hmadhani@...vell.com
L: linux-scsi@...r.kernel.org
S: Supported
F: Documentation/scsi/LICENSE.qla2xxx
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 296bbc3c4606..cf63916814cc 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -27,6 +27,11 @@
struct kmem_cache *zfcp_fsf_qtcb_cache;
+static bool ber_stop = true;
+module_param(ber_stop, bool, 0600);
+MODULE_PARM_DESC(ber_stop,
+ "Shuts down FCP devices for FCP channels that report a bit-error count in excess of its threshold (default on)");
+
static void zfcp_fsf_request_timeout_handler(struct timer_list *t)
{
struct zfcp_fsf_req *fsf_req = from_timer(fsf_req, t, timer);
@@ -236,10 +241,15 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
case FSF_STATUS_READ_SENSE_DATA_AVAIL:
break;
case FSF_STATUS_READ_BIT_ERROR_THRESHOLD:
- dev_warn(&adapter->ccw_device->dev,
- "The error threshold for checksum statistics "
- "has been exceeded\n");
zfcp_dbf_hba_bit_err("fssrh_3", req);
+ if (ber_stop) {
+ dev_warn(&adapter->ccw_device->dev,
+ "All paths over this FCP device are disused because of excessive bit errors\n");
+ zfcp_erp_adapter_shutdown(adapter, 0, "fssrh_b");
+ } else {
+ dev_warn(&adapter->ccw_device->dev,
+ "The error threshold for checksum statistics has been exceeded\n");
+ }
break;
case FSF_STATUS_READ_LINK_DOWN:
zfcp_fsf_status_read_link_down(req);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 4c26630c1c3e..009fd5a33fcd 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -2837,8 +2837,6 @@ qla2x00_status_cont_entry(struct rsp_que *rsp, sts_cont_entry_t *pkt)
if (sense_len == 0) {
rsp->status_srb = NULL;
sp->done(sp, cp->result);
- } else {
- WARN_ON_ONCE(true);
}
}
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1c470e31ae81..ae2fa170f6ad 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -967,6 +967,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
ses->data_direction = scmd->sc_data_direction;
ses->sdb = scmd->sdb;
ses->result = scmd->result;
+ ses->resid_len = scmd->req.resid_len;
ses->underflow = scmd->underflow;
ses->prot_op = scmd->prot_op;
ses->eh_eflags = scmd->eh_eflags;
@@ -977,6 +978,7 @@ void scsi_eh_prep_cmnd(struct scsi_cmnd *scmd, struct scsi_eh_save *ses,
memset(scmd->cmnd, 0, BLK_MAX_CDB);
memset(&scmd->sdb, 0, sizeof(scmd->sdb));
scmd->result = 0;
+ scmd->req.resid_len = 0;
if (sense_bytes) {
scmd->sdb.length = min_t(unsigned, SCSI_SENSE_BUFFERSIZE,
@@ -1029,6 +1031,7 @@ void scsi_eh_restore_cmnd(struct scsi_cmnd* scmd, struct scsi_eh_save *ses)
scmd->sc_data_direction = ses->data_direction;
scmd->sdb = ses->sdb;
scmd->result = ses->result;
+ scmd->req.resid_len = ses->resid_len;
scmd->underflow = ses->underflow;
scmd->prot_op = ses->prot_op;
scmd->eh_eflags = ses->eh_eflags;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 91af598f2f53..0f96eb0ddbfa 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1655,7 +1655,8 @@ static int sd_sync_cache(struct scsi_disk *sdkp, struct scsi_sense_hdr *sshdr)
/* we need to evaluate the error return */
if (scsi_sense_valid(sshdr) &&
(sshdr->asc == 0x3a || /* medium not present */
- sshdr->asc == 0x20)) /* invalid command */
+ sshdr->asc == 0x20 || /* invalid command */
+ (sshdr->asc == 0x74 && sshdr->ascq == 0x71))) /* drive is password locked */
/* this is no error here */
return 0;
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index 3810b340551c..6bd5ed695a5e 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -32,6 +32,7 @@ extern int scsi_ioctl_reset(struct scsi_device *, int __user *);
struct scsi_eh_save {
/* saved state */
int result;
+ unsigned int resid_len;
int eh_eflags;
enum dma_data_direction data_direction;
unsigned underflow;
Powered by blists - more mailing lists