| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM5PR04MB3299919E5C4C8A764DB3A656F5930@AM5PR04MB3299.eurprd04.prod.outlook.com>
Date: Tue, 15 Oct 2019 09:14:00 +0000
From: Xiaowei Bao <xiaowei.bao@....com>
To: Russell King - ARM Linux admin <linux@...linux.org.uk>
CC: "Z.q. Hou" <zhiqiang.hou@....com>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
Leo Li <leoyang.li@....com>, "kishon@...com" <kishon@...com>,
"lorenzo.pieralisi@....com" <lorenzo.pieralisi@....com>,
"M.h. Lian" <minghuan.lian@....com>,
"andrew.murray@....com" <andrew.murray@....com>,
Mingkai Hu <mingkai.hu@....com>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH 3/6] PCI: mobiveil: Add PCIe Gen4 EP driver for NXP
Layerscape SoCs
> -----Original Message-----
> From: Russell King - ARM Linux admin <linux@...linux.org.uk>
> Sent: 2019年10月15日 17:08
> To: Xiaowei Bao <xiaowei.bao@....com>
> Cc: Z.q. Hou <zhiqiang.hou@....com>; bhelgaas@...gle.com;
> robh+dt@...nel.org; mark.rutland@....com; shawnguo@...nel.org; Leo Li
> <leoyang.li@....com>; kishon@...com; lorenzo.pieralisi@....com; M.h. Lian
> <minghuan.lian@....com>; andrew.murray@....com; Mingkai Hu
> <mingkai.hu@....com>; linux-pci@...r.kernel.org;
> linux-arm-kernel@...ts.infradead.org; devicetree@...r.kernel.org;
> linux-kernel@...r.kernel.org
> Subject: Re: [PATCH 3/6] PCI: mobiveil: Add PCIe Gen4 EP driver for NXP
> Layerscape SoCs
>
> On Tue, Oct 15, 2019 at 07:46:12AM +0000, Xiaowei Bao wrote:
> >
> >
> > > -----Original Message-----
> > > From: Russell King - ARM Linux admin <linux@...linux.org.uk>
> > > Sent: 2019年9月25日 0:39
> > > To: Xiaowei Bao <xiaowei.bao@....com>
> > > Cc: Z.q. Hou <zhiqiang.hou@....com>; bhelgaas@...gle.com;
> > > robh+dt@...nel.org; mark.rutland@....com; shawnguo@...nel.org; Leo
> > > robh+Li
> > > <leoyang.li@....com>; kishon@...com; lorenzo.pieralisi@....com; M.h.
> > > Lian <minghuan.lian@....com>; andrew.murray@....com; Mingkai Hu
> > > <mingkai.hu@....com>; linux-pci@...r.kernel.org;
> > > linux-arm-kernel@...ts.infradead.org; devicetree@...r.kernel.org;
> > > linux-kernel@...r.kernel.org
> > > Subject: Re: [PATCH 3/6] PCI: mobiveil: Add PCIe Gen4 EP driver for
> > > NXP Layerscape SoCs
> > >
> > > On Mon, Sep 16, 2019 at 10:17:39AM +0800, Xiaowei Bao wrote:
> > > > This PCIe controller is based on the Mobiveil GPEX IP, it work in
> > > > EP mode if select this config opteration.
> > > >
> > > > Signed-off-by: Xiaowei Bao <xiaowei.bao@....com>
> > > > ---
> > > > MAINTAINERS | 2
> +
> > > > drivers/pci/controller/mobiveil/Kconfig | 17 ++-
> > > > drivers/pci/controller/mobiveil/Makefile | 1 +
> > > > .../controller/mobiveil/pcie-layerscape-gen4-ep.c | 156
> > > > +++++++++++++++++++++
> > > > 4 files changed, 173 insertions(+), 3 deletions(-) create mode
> > > > 100644 drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > > >
> > > > diff --git a/MAINTAINERS b/MAINTAINERS index b997056..0858b54
> > > > 100644
> > > > --- a/MAINTAINERS
> > > > +++ b/MAINTAINERS
> > > > @@ -12363,11 +12363,13 @@ F:
> > > drivers/pci/controller/dwc/*layerscape*
> > > >
> > > > PCI DRIVER FOR NXP LAYERSCAPE GEN4 CONTROLLER
> > > > M: Hou Zhiqiang <Zhiqiang.Hou@....com>
> > > > +M: Xiaowei Bao <xiaowei.bao@....com>
> > > > L: linux-pci@...r.kernel.org
> > > > L: linux-arm-kernel@...ts.infradead.org
> > > > S: Maintained
> > > > F: Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
> > > > F: drivers/pci/controller/mobibeil/pcie-layerscape-gen4.c
> > > > +F: drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > > >
> > > > PCI DRIVER FOR GENERIC OF HOSTS
> > > > M: Will Deacon <will@...nel.org>
> > > > diff --git a/drivers/pci/controller/mobiveil/Kconfig
> > > > b/drivers/pci/controller/mobiveil/Kconfig
> > > > index 2054950..0696b6e 100644
> > > > --- a/drivers/pci/controller/mobiveil/Kconfig
> > > > +++ b/drivers/pci/controller/mobiveil/Kconfig
> > > > @@ -27,13 +27,24 @@ config PCIE_MOBIVEIL_PLAT
> > > > for address translation and it is a PCIe Gen4 IP.
> > > >
> > > > config PCIE_LAYERSCAPE_GEN4
> > > > - bool "Freescale Layerscape PCIe Gen4 controller"
> > > > + bool "Freescale Layerscpe PCIe Gen4 controller in RC mode"
> > > > depends on PCI
> > > > depends on OF && (ARM64 || ARCH_LAYERSCAPE)
> > > > depends on PCI_MSI_IRQ_DOMAIN
> > > > select PCIE_MOBIVEIL_HOST
> > > > help
> > > > Say Y here if you want PCIe Gen4 controller support on
> > > > - Layerscape SoCs. The PCIe controller can work in RC or
> > > > - EP mode according to RCW[HOST_AGT_PEX] setting.
> > > > + Layerscape SoCs. And the PCIe controller work in RC mode
> > > > + by setting the RCW[HOST_AGT_PEX] to 0.
> > > > +
> > > > +config PCIE_LAYERSCAPE_GEN4_EP
> > > > + bool "Freescale Layerscpe PCIe Gen4 controller in EP mode"
> > > > + depends on PCI
> > > > + depends on OF && (ARM64 || ARCH_LAYERSCAPE)
> > > > + depends on PCI_ENDPOINT
> > > > + select PCIE_MOBIVEIL_EP
> > > > + help
> > > > + Say Y here if you want PCIe Gen4 controller support on
> > > > + Layerscape SoCs. And the PCIe controller work in EP mode
> > > > + by setting the RCW[HOST_AGT_PEX] to 1.
> > > > endmenu
> > > > diff --git a/drivers/pci/controller/mobiveil/Makefile
> > > > b/drivers/pci/controller/mobiveil/Makefile
> > > > index 686d41f..6f54856 100644
> > > > --- a/drivers/pci/controller/mobiveil/Makefile
> > > > +++ b/drivers/pci/controller/mobiveil/Makefile
> > > > @@ -4,3 +4,4 @@ obj-$(CONFIG_PCIE_MOBIVEIL_HOST) +=
> > > > pcie-mobiveil-host.o
> > > > obj-$(CONFIG_PCIE_MOBIVEIL_EP) += pcie-mobiveil-ep.o
> > > > obj-$(CONFIG_PCIE_MOBIVEIL_PLAT) += pcie-mobiveil-plat.o
> > > > obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie-layerscape-gen4.o
> > > > +obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4_EP) +=
> > > pcie-layerscape-gen4-ep.o
> > > > diff --git
> > > > a/drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > > > b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > > > new file mode 100644
> > > > index 0000000..7bfec51
> > > > --- /dev/null
> > > > +++ b/drivers/pci/controller/mobiveil/pcie-layerscape-gen4-ep.c
> > > > @@ -0,0 +1,156 @@
> > > > +// SPDX-License-Identifier: GPL-2.0
> > > > +/*
> > > > + * PCIe controller EP driver for Freescale Layerscape SoCs
> > > > + *
> > > > + * Copyright (C) 2019 NXP Semiconductor.
> > > > + *
> > > > + * Author: Xiaowei Bao <xiaowei.bao@....com> */
> > > > +
> > > > +#include <linux/kernel.h>
> > > > +#include <linux/init.h>
> > > > +#include <linux/of_pci.h>
> > > > +#include <linux/of_platform.h>
> > > > +#include <linux/of_address.h>
> > > > +#include <linux/pci.h>
> > > > +#include <linux/platform_device.h> #include <linux/resource.h>
> > > > +
> > > > +#include "pcie-mobiveil.h"
> > > > +
> > > > +#define PCIE_LX2_BAR_NUM 4
> > > > +
> > > > +#define to_ls_pcie_g4_ep(x) dev_get_drvdata((x)->dev)
> > > > +
> > > > +struct ls_pcie_g4_ep {
> > > > + struct mobiveil_pcie *mv_pci;
> > > > +};
> > > > +
> > > > +static const struct of_device_id ls_pcie_g4_ep_of_match[] = {
> > > > + { .compatible = "fsl,lx2160a-pcie-ep",},
> > > > + { },
> > > > +};
> > > > +
> > > > +static const struct pci_epc_features ls_pcie_g4_epc_features = {
> > > > + .linkup_notifier = false,
> > > > + .msi_capable = true,
> > > > + .msix_capable = true,
> > > > + .reserved_bar = (1 << BAR_4) | (1 << BAR_5),
> > >
> > > BIT(BAR_4) | BIT(BAR_5) ?
> >
> > I think use .reserved_bar = (1 << BAR_4) | (1 << BAR_5), is better,
> > because BAR_4 is not a bit of register.
>
> Why is whether it's a register or not relevent?
My understand is that the BIT is used to register, refer to other EP driver files,
it also use 1 << BAR_4 method.
[baoxw@...an controller]$ grep -r "reserved_bar" *
dwc/pci-keystone.c: .reserved_bar = 1 << BAR_0 | 1 << BAR_1,
mobiveil/pcie-layerscape-gen4-ep.c: .reserved_bar = (1 << BAR_4) | (1 << BAR_5),
Thanks
Xiaowei
>
> --
> RMK's Patch system:
> https://eur01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.
> armlinux.org.uk%2Fdeveloper%2Fpatches%2F&data=02%7C01%7Cxiao
> wei.bao%40nxp.com%7C3920d451f28b474ff67308d7514f3364%7C686ea1d3
> bc2b4c6fa92cd99c5c301635%7C0%7C0%7C637067272935564347&sda
> ta=mw%2FyCyJ%2FpjC59XWgYjLk73zYQUdyy4zXjJ1B1bStZOc%3D&reser
> ved=0
> FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps
> up According to speedtest.net: 11.9Mbps down 500kbps up
Powered by blists - more mailing lists