| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAPDyKFqwShPvcPmfe5P7-fqqjaeJdZV=Ak1i0-1_xJiBrhrVCg@mail.gmail.com>
Date: Tue, 15 Oct 2019 16:12:58 +0200
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Arnd Bergmann <arnd@...db.de>
Cc: Kukjin Kim <kgene@...nel.org>,
Krzysztof Kozlowski <krzk@...nel.org>,
Ben Dooks <ben-linux@...ff.org>,
linux-samsung-soc <linux-samsung-soc@...r.kernel.org>,
Linux ARM <linux-arm-kernel@...ts.infradead.org>,
Linus Walleij <linus.walleij@...aro.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
"linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>
Subject: Re: [PATCH 23/36] ARM: s3c: move s3cmci pinctrl handling into board files
On Thu, 10 Oct 2019 at 22:47, Arnd Bergmann <arnd@...db.de> wrote:
>
> Rather than call the internal s3c_gpio_cfgall_range() function
> through a platform header, move the code into the set_power
> callback that is already exported by the board, and add
> a default implementation.
>
> In DT mode, the code already does not set the pin config,
> so nothing changes there.
>
> Signed-off-by: Arnd Bergmann <arnd@...db.de>
This looks good to me!
Acked-by: Ulf Hansson <ulf.hansson@...aro.org>
Kind regards
Uffe
> ---
> arch/arm/mach-s3c24xx/include/mach/pm-core.h | 1 +
> arch/arm/mach-s3c24xx/mach-amlm5900.c | 15 +++++
> arch/arm/mach-s3c24xx/mach-at2440evb.c | 10 ++-
> arch/arm/mach-s3c24xx/mach-gta02.c | 15 +++++
> arch/arm/mach-s3c24xx/mach-h1940.c | 8 +++
> arch/arm/mach-s3c24xx/mach-mini2440.c | 9 ++-
> arch/arm/mach-s3c24xx/mach-n30.c | 9 +++
> arch/arm/mach-s3c24xx/mach-qt2410.c | 15 +++++
> arch/arm/mach-s3c24xx/mach-rx1950.c | 9 +++
> arch/arm/mach-s3c24xx/mach-tct_hammer.c | 15 +++++
> arch/arm/plat-samsung/devs.c | 29 ++++++++
> drivers/mmc/host/s3cmci.c | 69 +++++---------------
> include/linux/platform_data/mmc-s3cmci.h | 2 +
> 13 files changed, 152 insertions(+), 54 deletions(-)
>
> diff --git a/arch/arm/mach-s3c24xx/include/mach/pm-core.h b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
> index 8f87606c4cdc..a22b4a37ee57 100644
> --- a/arch/arm/mach-s3c24xx/include/mach/pm-core.h
> +++ b/arch/arm/mach-s3c24xx/include/mach/pm-core.h
> @@ -12,6 +12,7 @@
>
> #include "regs-clock.h"
> #include "regs-irq.h"
> +#include <mach/irqs.h>
>
> static inline void s3c_pm_debug_init_uart(void)
> {
> diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
> index 9a9daf526d0c..40ad23b52bc0 100644
> --- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
> +++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
> @@ -13,6 +13,7 @@
> #include <linux/list.h>
> #include <linux/timer.h>
> #include <linux/init.h>
> +#include <linux/gpio/machine.h>
> #include <linux/gpio.h>
> #include <linux/device.h>
> #include <linux/platform_device.h>
> @@ -124,6 +125,19 @@ static struct s3c2410_uartcfg amlm5900_uartcfgs[] = {
> }
> };
>
> +static struct gpiod_lookup_table amlm5900_mmc_gpio_table = {
> + .dev_id = "s3c2410-sdi",
> + .table = {
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> + { },
> + },
> +};
>
> static struct platform_device *amlm5900_devices[] __initdata = {
> #ifdef CONFIG_FB_S3C2410
> @@ -219,6 +233,7 @@ static void __init amlm5900_init(void)
> s3c24xx_fb_set_platdata(&amlm5900_fb_info);
> #endif
> s3c_i2c0_set_platdata(NULL);
> + gpiod_add_lookup_table(&amlm5900_mmc_gpio_table);
> platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices));
> }
>
> diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
> index 58c5ef3cf1d7..3a793aaf2cba 100644
> --- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
> +++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
> @@ -136,7 +136,7 @@ static struct platform_device at2440evb_device_eth = {
> };
>
> static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata = {
> - /* Intentionally left blank */
> + .set_power = s3c24xx_mci_def_set_power,
> };
>
> static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
> @@ -144,10 +144,18 @@ static struct gpiod_lookup_table at2440evb_mci_gpio_table = {
> .table = {
> /* Card detect S3C2410_GPG(10) */
> GPIO_LOOKUP("GPG", 10, "cd", GPIO_ACTIVE_LOW),
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> { },
> },
> };
>
> +
> /* 7" LCD panel */
>
> static struct s3c2410fb_display at2440evb_lcd_cfg __initdata = {
> diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
> index 1ca0460d82f4..61b8c6badeb8 100644
> --- a/arch/arm/mach-s3c24xx/mach-gta02.c
> +++ b/arch/arm/mach-s3c24xx/mach-gta02.c
> @@ -489,6 +489,20 @@ static struct platform_device gta02_audio = {
> .id = -1,
> };
>
> +static struct gpiod_lookup_table gta02_mmc_gpio_table = {
> + .dev_id = "s3c2410-sdi",
> + .table = {
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> + { },
> + },
> +};
> +
> static void __init gta02_map_io(void)
> {
> s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
> @@ -545,6 +559,7 @@ static void __init gta02_machine_init(void)
> S3C_GPIO_PULL_NONE);
>
> gpiod_add_lookup_table(>a02_audio_gpio_table);
> + gpiod_add_lookup_table(>a02_mmc_gpio_table);
> platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
> pm_power_off = gta02_poweroff;
>
> diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
> index 11f705fb5e32..24f785da7659 100644
> --- a/arch/arm/mach-s3c24xx/mach-h1940.c
> +++ b/arch/arm/mach-s3c24xx/mach-h1940.c
> @@ -462,6 +462,7 @@ static void h1940_set_mmc_power(unsigned char power_mode, unsigned short vdd)
> static struct s3c24xx_mci_pdata h1940_mmc_cfg __initdata = {
> .set_power = h1940_set_mmc_power,
> .ocr_avail = MMC_VDD_32_33,
> + .set_power = s3c24xx_mci_def_set_power,
> };
>
> static struct gpiod_lookup_table h1940_mmc_gpio_table = {
> @@ -471,6 +472,13 @@ static struct gpiod_lookup_table h1940_mmc_gpio_table = {
> GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
> /* Write protect S3C2410_GPH(8) */
> GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> { },
> },
> };
> diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
> index 894d43ff94f1..5c000efdf0e8 100644
> --- a/arch/arm/mach-s3c24xx/mach-mini2440.c
> +++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
> @@ -236,7 +236,7 @@ static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
>
> static struct s3c24xx_mci_pdata mini2440_mmc_cfg __initdata = {
> .wprotect_invert = 1,
> - .set_power = NULL,
> + .set_power = s3c24xx_mci_def_set_power,
> .ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34,
> };
>
> @@ -247,6 +247,13 @@ static struct gpiod_lookup_table mini2440_mmc_gpio_table = {
> GPIO_LOOKUP("GPG", 8, "cd", GPIO_ACTIVE_LOW),
> /* Write protect S3C2410_GPH(8) */
> GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_HIGH),
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> { },
> },
> };
> diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
> index 5f5ca4b7015c..8d7ad61e9930 100644
> --- a/arch/arm/mach-s3c24xx/mach-n30.c
> +++ b/arch/arm/mach-s3c24xx/mach-n30.c
> @@ -339,6 +339,8 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = {
>
> static void n30_sdi_set_power(unsigned char power_mode, unsigned short vdd)
> {
> + s3c24xx_mci_def_set_power(power_mode, vdd);
> +
> switch (power_mode) {
> case MMC_POWER_ON:
> case MMC_POWER_UP:
> @@ -364,6 +366,13 @@ static struct gpiod_lookup_table n30_mci_gpio_table = {
> /* Write protect S3C2410_GPG(10) */
> GPIO_LOOKUP("GPG", 10, "wp", GPIO_ACTIVE_LOW),
> { },
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> },
> };
>
> diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
> index 6686f02a3f4f..9b47b8434f10 100644
> --- a/arch/arm/mach-s3c24xx/mach-qt2410.c
> +++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
> @@ -219,6 +219,20 @@ static struct gpiod_lookup_table qt2410_spi_gpiod_table = {
> },
> };
>
> +static struct gpiod_lookup_table qt2410_mmc_gpiod_table = {
> + .dev_id = "s3c2410-sdi",
> + .table = {
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> + { },
> + },
> +};
> +
> /* Board devices */
>
> static struct platform_device *qt2410_devices[] __initdata = {
> @@ -342,6 +356,7 @@ static void __init qt2410_machine_init(void)
> s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
> S3C_GPIO_PULL_NONE);
> gpiod_add_lookup_table(&qt2410_spi_gpiod_table);
> + gpiod_add_lookup_table(&qt2410_mmc_gpiod_table);
> platform_add_devices(qt2410_devices, ARRAY_SIZE(qt2410_devices));
> s3c_pm_init();
> }
> diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
> index 4eeede398775..820e626f5129 100644
> --- a/arch/arm/mach-s3c24xx/mach-rx1950.c
> +++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
> @@ -545,6 +545,8 @@ static struct platform_device rx1950_backlight = {
>
> static void rx1950_set_mmc_power(unsigned char power_mode, unsigned short vdd)
> {
> + s3c24xx_mci_def_set_power(power_mode, vdd);
> +
> switch (power_mode) {
> case MMC_POWER_OFF:
> gpio_direction_output(S3C2410_GPJ(1), 0);
> @@ -570,6 +572,13 @@ static struct gpiod_lookup_table rx1950_mmc_gpio_table = {
> GPIO_LOOKUP("GPF", 5, "cd", GPIO_ACTIVE_LOW),
> /* Write protect S3C2410_GPH(8) */
> GPIO_LOOKUP("GPH", 8, "wp", GPIO_ACTIVE_LOW),
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> { },
> },
> };
> diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
> index 8d8ddd6ea305..d6dbbe6759bc 100644
> --- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
> +++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
> @@ -7,6 +7,7 @@
> // derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
> // Ben Dooks <ben@...tec.co.uk>
>
> +#include <linux/gpio/machine.h>
> #include <linux/kernel.h>
> #include <linux/types.h>
> #include <linux/interrupt.h>
> @@ -103,6 +104,19 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = {
> }
> };
>
> +static struct gpiod_lookup_table tct_hammer_mmc_gpio_table = {
> + .dev_id = "s3c2410-sdi",
> + .table = {
> + /* bus pins */
> + GPIO_LOOKUP_IDX("GPIOE", 5, "bus", 0, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 6, "bus", 1, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 7, "bus", 2, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 8, "bus", 3, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 9, "bus", 4, GPIO_ACTIVE_HIGH),
> + GPIO_LOOKUP_IDX("GPIOE", 10, "bus", 5, GPIO_ACTIVE_HIGH),
> + { },
> + },
> +};
>
> static struct platform_device *tct_hammer_devices[] __initdata = {
> &s3c_device_adc,
> @@ -131,6 +145,7 @@ static void __init tct_hammer_init_time(void)
> static void __init tct_hammer_init(void)
> {
> s3c_i2c0_set_platdata(NULL);
> + gpiod_add_lookup_table(&tct_hammer_mmc_gpio_table);
> platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices));
> }
>
> diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
> index ddd90f0bb380..c0739bda060b 100644
> --- a/arch/arm/plat-samsung/devs.c
> +++ b/arch/arm/plat-samsung/devs.c
> @@ -5,6 +5,7 @@
> //
> // Base SAMSUNG platform device definitions
>
> +#include <linux/gpio.h>
> #include <linux/kernel.h>
> #include <linux/types.h>
> #include <linux/interrupt.h>
> @@ -40,6 +41,8 @@
> #include <mach/dma.h>
> #include <mach/irqs.h>
> #include <mach/map.h>
> +#include <mach/gpio-samsung.h>
> +#include <plat/gpio-cfg.h>
> #include <mach/regs-s3c2443-clock.h>
>
> #include <plat/cpu.h>
> @@ -833,16 +836,42 @@ struct platform_device s3c_device_rtc = {
> /* SDI */
>
> #ifdef CONFIG_PLAT_S3C24XX
> +void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd)
> +{
> + switch (power_mode) {
> + case MMC_POWER_ON:
> + case MMC_POWER_UP:
> + /* Configure GPE5...GPE10 pins in SD mode */
> + s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
> + S3C_GPIO_PULL_NONE);
> + break;
> +
> + case MMC_POWER_OFF:
> + default:
> + gpio_direction_output(S3C2410_GPE(5), 0);
> + break;
> + }
> +}
> +
> static struct resource s3c_sdi_resource[] = {
> [0] = DEFINE_RES_MEM(S3C24XX_PA_SDI, S3C24XX_SZ_SDI),
> [1] = DEFINE_RES_IRQ(IRQ_SDI),
> };
>
> +static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
> + /* This is currently here to avoid a number of if (host->pdata)
> + * checks. Any zero fields to ensure reasonable defaults are picked. */
> + .no_wprotect = 1,
> + .no_detect = 1,
> + .set_power = s3c24xx_mci_def_set_power,
> +};
> +
> struct platform_device s3c_device_sdi = {
> .name = "s3c2410-sdi",
> .id = -1,
> .num_resources = ARRAY_SIZE(s3c_sdi_resource),
> .resource = s3c_sdi_resource,
> + .dev.platform_data = &s3cmci_def_pdata,
> };
>
> void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata)
> diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
> index bce9c33bc4b5..c2b46640a78b 100644
> --- a/drivers/mmc/host/s3cmci.c
> +++ b/drivers/mmc/host/s3cmci.c
> @@ -25,9 +25,7 @@
> #include <linux/of_device.h>
> #include <linux/mmc/slot-gpio.h>
>
> -#include <plat/gpio-cfg.h>
> #include <mach/dma.h>
> -#include <mach/gpio-samsung.h>
>
> #include <linux/platform_data/mmc-s3cmci.h>
>
> @@ -307,7 +305,8 @@ static inline void clear_imask(struct s3cmci_host *host)
> static void s3cmci_check_sdio_irq(struct s3cmci_host *host)
> {
> if (host->sdio_irqen) {
> - if (gpio_get_value(S3C2410_GPE(8)) == 0) {
> + if (host->pdata->bus[3] &&
> + gpiod_get_value(host->pdata->bus[3]) == 0) {
> pr_debug("%s: signalling irq\n", __func__);
> mmc_signal_sdio_irq(host->mmc);
> }
> @@ -1213,33 +1212,20 @@ static void s3cmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> switch (ios->power_mode) {
> case MMC_POWER_ON:
> case MMC_POWER_UP:
> - /* Configure GPE5...GPE10 pins in SD mode */
> - if (!host->pdev->dev.of_node)
> - s3c_gpio_cfgall_range(S3C2410_GPE(5), 6, S3C_GPIO_SFN(2),
> - S3C_GPIO_PULL_NONE);
> -
> - if (host->pdata->set_power)
> - host->pdata->set_power(ios->power_mode, ios->vdd);
> -
> if (!host->is2440)
> mci_con |= S3C2410_SDICON_FIFORESET;
> -
> break;
>
> case MMC_POWER_OFF:
> default:
> - if (!host->pdev->dev.of_node)
> - gpio_direction_output(S3C2410_GPE(5), 0);
> -
> if (host->is2440)
> mci_con |= S3C2440_SDICON_SDRESET;
> -
> - if (host->pdata->set_power)
> - host->pdata->set_power(ios->power_mode, ios->vdd);
> -
> break;
> }
>
> + if (host->pdata->set_power)
> + host->pdata->set_power(ios->power_mode, ios->vdd);
> +
> s3cmci_set_clk(host, ios);
>
> /* Set CLOCK_ENABLE */
> @@ -1317,13 +1303,6 @@ static const struct mmc_host_ops s3cmci_ops = {
> .enable_sdio_irq = s3cmci_enable_sdio_irq,
> };
>
> -static struct s3c24xx_mci_pdata s3cmci_def_pdata = {
> - /* This is currently here to avoid a number of if (host->pdata)
> - * checks. Any zero fields to ensure reasonable defaults are picked. */
> - .no_wprotect = 1,
> - .no_detect = 1,
> -};
> -
> #ifdef CONFIG_ARM_S3C24XX_CPUFREQ
>
> static int s3cmci_cpufreq_transition(struct notifier_block *nb,
> @@ -1477,24 +1456,21 @@ static int s3cmci_probe_pdata(struct s3cmci_host *host)
> int i, ret;
>
> host->is2440 = platform_get_device_id(pdev)->driver_data;
> + pdata = pdev->dev.platform_data;
> + if (!pdata) {
> + dev_err(&pdev->dev, "need platform data");
> + return -ENXIO;
> + }
>
> - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++) {
> - ret = gpio_request(i, dev_name(&pdev->dev));
> - if (ret) {
> + for (i = 0; i < 6; i++) {
> + pdata->bus[i] = devm_gpiod_get_index(&pdev->dev, "bus", i,
> + GPIOD_OUT_LOW);
> + if (IS_ERR(pdata->bus[i])) {
> dev_err(&pdev->dev, "failed to get gpio %d\n", i);
> -
> - for (i--; i >= S3C2410_GPE(5); i--)
> - gpio_free(i);
> -
> - return ret;
> + return PTR_ERR(pdata->bus[i]);
> }
> }
>
> - if (!pdev->dev.platform_data)
> - pdev->dev.platform_data = &s3cmci_def_pdata;
> -
> - pdata = pdev->dev.platform_data;
> -
> if (pdata->no_wprotect)
> mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT;
>
> @@ -1549,7 +1525,6 @@ static int s3cmci_probe(struct platform_device *pdev)
> struct s3cmci_host *host;
> struct mmc_host *mmc;
> int ret;
> - int i;
>
> mmc = mmc_alloc_host(sizeof(struct s3cmci_host), &pdev->dev);
> if (!mmc) {
> @@ -1593,7 +1568,7 @@ static int s3cmci_probe(struct platform_device *pdev)
> "failed to get io memory region resource.\n");
>
> ret = -ENOENT;
> - goto probe_free_gpio;
> + goto probe_free_host;
> }
>
> host->mem = request_mem_region(host->mem->start,
> @@ -1602,7 +1577,7 @@ static int s3cmci_probe(struct platform_device *pdev)
> if (!host->mem) {
> dev_err(&pdev->dev, "failed to request io memory region.\n");
> ret = -ENOENT;
> - goto probe_free_gpio;
> + goto probe_free_host;
> }
>
> host->base = ioremap(host->mem->start, resource_size(host->mem));
> @@ -1726,11 +1701,6 @@ static int s3cmci_probe(struct platform_device *pdev)
> probe_free_mem_region:
> release_mem_region(host->mem->start, resource_size(host->mem));
>
> - probe_free_gpio:
> - if (!pdev->dev.of_node)
> - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
> - gpio_free(i);
> -
> probe_free_host:
> mmc_free_host(mmc);
>
> @@ -1756,7 +1726,6 @@ static int s3cmci_remove(struct platform_device *pdev)
> {
> struct mmc_host *mmc = platform_get_drvdata(pdev);
> struct s3cmci_host *host = mmc_priv(mmc);
> - int i;
>
> s3cmci_shutdown(pdev);
>
> @@ -1769,10 +1738,6 @@ static int s3cmci_remove(struct platform_device *pdev)
>
> free_irq(host->irq, host);
>
> - if (!pdev->dev.of_node)
> - for (i = S3C2410_GPE(5); i <= S3C2410_GPE(10); i++)
> - gpio_free(i);
> -
> iounmap(host->base);
> release_mem_region(host->mem->start, resource_size(host->mem));
>
> diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h
> index 33310b11cbdd..bacb86db3112 100644
> --- a/include/linux/platform_data/mmc-s3cmci.h
> +++ b/include/linux/platform_data/mmc-s3cmci.h
> @@ -35,6 +35,7 @@ struct s3c24xx_mci_pdata {
> unsigned long ocr_avail;
> void (*set_power)(unsigned char power_mode,
> unsigned short vdd);
> + struct gpio_desc *bus[6];
> };
>
> /**
> @@ -44,6 +45,7 @@ struct s3c24xx_mci_pdata {
> * Copy the platform data supplied by @pdata so that this can be marked
> * __initdata.
> */
> +extern void s3c24xx_mci_def_set_power(unsigned char power_mode, unsigned short vdd);
> extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata);
>
> #endif /* _ARCH_NCI_H */
> --
> 2.20.0
>
Powered by blists - more mailing lists