[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191016150622.21753-8-frieder.schrempf@kontron.de>
Date: Wed, 16 Oct 2019 15:07:29 +0000
From: Schrempf Frieder <frieder.schrempf@...tron.de>
To: "krzk@...nel.org" <krzk@...nel.org>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
Schrempf Frieder <frieder.schrempf@...tron.de>,
"Mark Rutland" <mark.rutland@....com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH 07/10] ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and
overcurrent polarity to usb nodes
From: Frieder Schrempf <frieder.schrempf@...tron.de>
To silence the warnings shown by the driver at boot time, we add a
fixed regulator for the 5V supply of usbotg2 and specify the polarity
of the overcurrent signal for usbotg1.
Signed-off-by: Frieder Schrempf <frieder.schrempf@...tron.de>
---
arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
index 779d75f42268..a2393568488f 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
@@ -43,6 +43,13 @@
regulator-max-microvolt = <3300000>;
};
+ reg_5v: regulator-5v {
+ compatible = "regulator-fixed";
+ regulator-name = "5v";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg1_vbus";
@@ -189,6 +196,7 @@
srp-disable;
hnp-disable;
adp-disable;
+ over-current-active-low;
vbus-supply = <®_usb_otg1_vbus>;
status = "okay";
};
@@ -196,6 +204,7 @@
&usbotg2 {
dr_mode = "host";
disable-over-current;
+ vbus-supply = <®_5v>;
status = "okay";
};
--
2.17.1
Powered by blists - more mailing lists