Panasonic CF-29 MK5 - Top PCMCIA (CardBUS) slot does work perfectly. Top slot contains a Ubiquity SuperRange Cardbus WiFi card. Bottom slot contains an Adaptec USB2connect 2 port USB card. uname -a Linux antiX1 2.6.32-1-mepis-smp #1 SMP PREEMPT Wed Apr 7 22:08:34 EDT 2010 i686 GNU/Linux dmesg Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.32-1-mepis-smp (MEPIS 2.6.32-11mepis1) (waldi@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP PREEMPT Wed Apr 7 22:08:34 EDT 2010 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable) BIOS-e820: 000000007f6e0000 - 000000007f6ee000 (ACPI data) BIOS-e820: 000000007f6ee000 - 000000007f700000 (ACPI NVS) BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI 2.3 present. Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) last_pfn = 0x7f6e0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-E3FFF write-back E4000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 07F700000 mask FFFF00000 uncachable 2 base 07F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled PAT not supported by CPU. initial memory mapped : 0 - 01800000 init_memory_mapping: 0000000000000000-00000000373fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 10000-16000 RAMDISK: 37a00000 - 37fef213 Allocated new RAMDISK: 00100000 - 006ef213 Move RAMDISK from 0000000037a00000 - 0000000037fef212 to 00100000 - 006ef212 ACPI: RSDP 000f6840 00014 (v00 PTLTD ) ACPI: RSDT 7f6e604a 00040 (v01 PTLTD RSDT 06040000 LTP 00000000) ACPI: FACP 7f6ede78 00084 (v02 MATBIO CF29-5 06040000 MEI 00000001) ACPI: DSDT 7f6e68d0 075A8 (v01 MATBIO CF29-5 06040000 MSFT 0100000E) ACPI: FACS 7f6eefc0 00040 ACPI: APIC 7f6edefc 00062 (v01 MATBIO CF29-5 06040000 MEI 00000001) ACPI: BOOT 7f6edfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) ACPI: MCFG 7f6edf9c 0003C (v01 MATBIO CF29-5 06040000 MEI 00000001) ACPI: SSDT 7f6e6487 002B9 (v01 PmRef Cpu0Ist 00003000 INTL 20030224) ACPI: SSDT 7f6e62a9 001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224) ACPI: SSDT 7f6e608a 0021F (v01 PmRef CpuPm 00003000 INTL 20030224) ACPI: Local APIC address 0xfee00000 1154MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 00012000 - 00018e80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0001000000 - 00015d0728] TEXT DATA BSS ==> [0001000000 - 00015d0728] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] #5 [00015d1000 - 00015d71b4] BRK ==> [00015d1000 - 00015d71b4] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] #7 [0000100000 - 00006ef213] NEW RAMDISK ==> [0000100000 - 00006ef213] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] Zone PFN ranges: DMA 0x00000010 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0007f6e0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000010 -> 0x0000009f 0: 0x00000100 -> 0x0007f6e0 On node 0 totalpages: 521839 free_area_init_node: node 0, pgdat c14e69a0, node_mem_map c15d9200 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3951 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 2310 pages used for memmap HighMem zone: 293340 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information SMP: Allowing 2 CPUs, 1 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 80000000 (gap: 80000000:60000000) Booting paravirtualized kernel on bare hardware NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 13 pages/cpu @c2800000 s29624 r0 d23624 u2097152 pcpu-alloc: s29624 r0 d23624 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761 Kernel command line: root=/dev/sda2 nomce quiet nosplash vga=791 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000373fe:0007f6e0) Memory: 2057076k/2087808k available (3420k kernel code, 29352k reserved, 1623k data, 376k init, 1182600k highmem) virtual kernel memory layout: fixmap : 0xffd56000 - 0xfffff000 (2724 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc14ed000 - 0xc154b000 ( 376 kB) .data : 0xc1357031 - 0xc14ece18 (1623 kB) .text : 0xc1000000 - 0xc1357031 (3420 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour dummy device 80x25 console [tty0] enabled Fast TSC calibration using PIT Detected 1595.807 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.59 BogoMIPS (lpj=5319356) Security Framework initialized SELinux: Disabled at boot. Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K Performance Events: p6 PMU driver. ... version: 0 ... bit width: 32 ... generic registers: 2 ... value mask: 00000000ffffffff ... max period: 000000007fffffff ... fixed-purpose events: 0 ... event mask: 0000000000000003 Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20090903 Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08 Brought up 1 CPUs Total of 1 processors activated (3192.59 BogoMIPS). regulator: core version 0.5 NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 ACPI: ACPI Dock Station Driver: 1 docks/bays found ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 32bit mmio: [0xb0080000-0xb00fffff] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff] pci 0000:00:02.0: reg 1c 32bit mmio: [0xb0000000-0xb003ffff] pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0040000-0xb00403ff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff] pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff] pci 0000:00:1e.2: reg 18 32bit mmio: [0xb0040800-0xb00409ff] pci 0000:00:1e.2: reg 1c 32bit mmio: [0xb0040400-0xb00404ff] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold pci 0000:00:1e.2: PME# disabled pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff] pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold pci 0000:00:1e.3: PME# disabled pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] pci 0000:00:1f.2: reg 20 io port: [0x1890-0x189f] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf] pci 0000:02:00.0: reg 10 64bit mmio: [0xb4000000-0xb4003fff] pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff] pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xb4000000-0xb7ffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xd3ffffff] pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:06:01.0: supports D1 D2 pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:01.0: PME# disabled pci 0000:06:01.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:06:01.1: supports D1 D2 pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:01.1: PME# disabled pci 0000:06:01.2: reg 10 32bit mmio: [0xb8000000-0xb80000ff] pci 0000:06:01.2: supports D1 D2 pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:06:01.2: PME# disabled pci 0000:06:02.0: reg 10 32bit mmio: [0xb8001000-0xb8001fff] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold pci 0000:06:02.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge 32bit mmio: [0xb8000000-0xb80fffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *9) ACPI: PCI Interrupt Link [LNKB] (IRQs *9) ACPI: PCI Interrupt Link [LNKC] (IRQs *9) ACPI: PCI Interrupt Link [LNKD] (IRQs *9) ACPI: PCI Interrupt Link [LNKE] (IRQs *9) ACPI: PCI Interrupt Link [LNKF] (IRQs *9) ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs *9) vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled by ACPI PNP system 00:01: iomem range 0xcf200-0xcf7ff has been reserved system 00:01: iomem range 0xd0800-0xd3fff has been reserved system 00:02: ioport range 0x900-0x91f has been reserved system 00:02: ioport range 0x92c-0x97f has been reserved system 00:02: ioport range 0xfe00-0xfe01 has been reserved system 00:02: ioport range 0x920-0x92b has been reserved system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved system 00:03: ioport range 0x2e0-0x2e7 has been reserved system 00:03: ioport range 0x330-0x337 has been reserved system 00:07: ioport range 0x800-0x80f has been reserved system 00:07: ioport range 0x1000-0x107f has been reserved system 00:07: ioport range 0x1180-0x11bf has been reserved system 00:07: iomem range 0xe0000000-0xefffffff has been reserved system 00:07: iomem range 0xf0000000-0xf0003fff has been reserved system 00:07: iomem range 0xf0004000-0xf0004fff has been reserved system 00:07: iomem range 0xf0005000-0xf0005fff has been reserved system 00:07: iomem range 0xf0008000-0xf000bfff has been reserved system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved system 00:07: iomem range 0xfed45000-0xfed8ffff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x3000-0x3fff pci 0000:00:1c.0: MEM window: 0xb4000000-0xb7ffffff pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d3ffffff pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07 pci 0000:06:01.0: IO window: 0x004000-0x0040ff pci 0000:06:01.0: IO window: 0x004400-0x0044ff pci 0000:06:01.0: PREFETCH window: 0x80000000-0x83ffffff pci 0000:06:01.0: MEM window: 0x8c000000-0x8fffffff pci 0000:06:01.1: CardBus bridge, secondary bus 0000:08 pci 0000:06:01.1: IO window: 0x004800-0x0048ff pci 0000:06:01.1: IO window: 0x004c00-0x004cff pci 0000:06:01.1: PREFETCH window: 0x84000000-0x87ffffff pci 0000:06:01.1: MEM window: 0x90000000-0x93ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06 pci 0000:00:1e.0: IO window: 0x4000-0x4fff pci 0000:00:1e.0: MEM window: 0xb8000000-0xb80fffff pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x87ffffff pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci 0000:06:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:06:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff] pci_bus 0000:02: resource 1 mem: [0xb4000000-0xb7ffffff] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd3ffffff] pci_bus 0000:06: resource 0 io: [0x4000-0x4fff] pci_bus 0000:06: resource 1 mem: [0xb8000000-0xb80fffff] pci_bus 0000:06: resource 2 pref mem [0x80000000-0x87ffffff] pci_bus 0000:06: resource 3 io: [0x00-0xffff] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:07: resource 0 io: [0x4000-0x40ff] pci_bus 0000:07: resource 1 io: [0x4400-0x44ff] pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff] pci_bus 0000:07: resource 3 mem: [0x8c000000-0x8fffffff] pci_bus 0000:08: resource 0 io: [0x4800-0x48ff] pci_bus 0000:08: resource 1 io: [0x4c00-0x4cff] pci_bus 0000:08: resource 2 pref mem [0x84000000-0x87ffffff] pci_bus 0000:08: resource 3 mem: [0x90000000-0x93ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 pci 0000:00:02.0: Boot video device Trying to unpack rootfs image as initramfs... Freeing initrd memory: 6076k freed Simple Boot Flag at 0x41 set to 0x1 audit: initializing netlink socket (disabled) type=2000 audit(1571245481.633:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher NTFS driver 2.1.29 [Flags: R/W]. msgmni has been set to 1721 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport 0000:00:1c.0: setting latency timer to 64 vesafb: framebuffer at 0xc0000000, mapped to 0xf7c80000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 serial 0000:00:1e.3: PCI INT B disabled brd: module loaded loop: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 Uniform Multi-Platform E-IDE driver ide-cd driver 5.00 ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:1f.2: PCI INT B disabled ahci: probe of 0000:00:1f.2 failed with error -22 ata_piix 0000:00:1f.2: version 2.13 ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ] ata_piix 0000:00:1f.2: setting latency timer to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15 ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.32-1-mepis-smp ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver ums-alauda usbcore: registered new interface driver ums-cypress usbcore: registered new interface driver ums-datafab usbcore: registered new interface driver ums-freecom usbcore: registered new interface driver ums-isd200 usbcore: registered new interface driver ums-jumpshot usbcore: registered new interface driver ums-karma usbcore: registered new interface driver ums-onetouch usbcore: registered new interface driver ums-sddr09 usbcore: registered new interface driver ums-sddr55 usbcore: registered new interface driver ums-usbat PNP: PS/2 Controller [PNP0303:K101,FJC6001:MOU1] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:08: RTC can wake from S4 rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu No iBFT detected. TCP cubic registered NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 NET: Registered protocol family 17 Using IPI No-Shortcut mode rtc_cmos 00:08: setting system clock to 2019-10-16 17:04:42 UTC (1571245482) input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.00, max UDMA/33 ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 32GB, CXM12D1Q, max UDMA/133 ata1.00: 62533296 sectors, multi 16: LBA48 ata2.00: configured for UDMA/33 ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM1 PQ: 0 ANSI: 5 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sd 0:0:0:0: [sda] Attached SCSI disk scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.00 PQ: 0 ANSI: 5 sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Freeing unused kernel memory: 376k freed thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [TZC] (55 C) agpgart-intel 0000:00:00.0: Intel 915GM Chipset agpgart-intel 0000:00:00.0: detected 7932K stolen memory sky2 driver version 1.25 sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 sky2 0000:02:00.0: setting latency timer to 64 sky2 0000:02:00.0: Yukon-2 EC chip revision 1 sky2 0000:02:00.0: irq 25 for MSI/MSI-X input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 uhci_hcd: USB Universal Host Controller Interface driver ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 ACPI: Power Button [PWRF] sky2 eth0: addr 00:0b:97:96:26:50 agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.32-1-mepis-smp uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.32-1-mepis-smp uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.32-1-mepis-smp uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:06:01.2: SDHCI controller found [1180:0822] (rev 11) sdhci-pci 0000:06:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19 Registered led device: mmc0:: mmc0: SDHCI controller on PCI [0000:06:01.2] using PIO EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds udev: starting version 151 intel_rng: FWH not detected lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' ACPI: AC Adapter [AC] (on-line) Marking TSC unstable due to TSC halts in idle processor LNXCPU:00: registered as cooling_device0 Switching to clocksource hpet ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ACPI: Battery Slot [BATA] (battery present) input: Panasonic Laptop Support as /devices/virtual/input/input6 ACPI: Battery Slot [BATB] (battery absent) yenta_cardbus 0000:06:01.0: CardBus bridge found [10f7:8338] parport_pc 00:0d: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq ipw2200: Copyright(c) 2003-2006 Intel Corporation input: PS/2 Touchpad as /devices/platform/i8042/serio1/input/input7 Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 Intel ICH Modem 0000:00:1e.3: setting latency timer to 64 yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0c98, PCI irq 20 yenta_cardbus 0000:06:01.0: Socket status: 30000820 yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean. yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xb80fffff yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff ipw2200 0000:06:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection ipw2200 0000:06:02.0: firmware: requesting ipw2200-bss.fw Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17 Intel ICH 0000:00:1e.2: setting latency timer to 64 input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio1/input/input8 ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels) yenta_cardbus 0000:06:01.1: CardBus bridge found [10f7:8338] yenta_cardbus 0000:06:01.1: ISA IRQ mask 0x0c98, PCI irq 21 yenta_cardbus 0000:06:01.1: Socket status: 30000820 pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #08 to #0b yenta_cardbus 0000:06:01.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x4fff: clean. yenta_cardbus 0000:06:01.1: pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xb80fffff yenta_cardbus 0000:06:01.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:07:00.0: supports D1 D2 pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot pci 0000:07:00.0: PME# disabled pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0x000fff] pci 0000:07:00.1: supports D1 D2 pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot pci 0000:07:00.1: PME# disabled pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0x0000ff] pci 0000:07:00.2: supports D1 D2 pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot pci 0000:07:00.2: PME# disabled ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002) ehci_hcd 0000:07:00.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:07:00.2: EHCI Host Controller ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 5 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:07:00.0: enabling device (0000 -> 0002) ohci_hcd 0000:07:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:07:00.0: setting latency timer to 64 ohci_hcd 0000:07:00.0: OHCI Host Controller ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6 ohci_hcd 0000:07:00.0: irq 20, io mem 0x8c000000 ehci_hcd 0000:07:00.2: irq 20, io mem 0x8c002000 ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00 usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: EHCI Host Controller usb usb5: Manufacturer: Linux 2.6.32-1-mepis-smp ehci_hcd usb usb5: SerialNumber: 0000:07:00.2 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.32-1-mepis-smp ohci_hcd usb usb6: SerialNumber: 0000:07:00.0 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected ohci_hcd 0000:07:00.1: enabling device (0000 -> 0002) ohci_hcd 0000:07:00.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:07:00.1: setting latency timer to 64 ohci_hcd 0000:07:00.1: OHCI Host Controller ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7 ohci_hcd 0000:07:00.1: irq 20, io mem 0x8c001000 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: OHCI Host Controller usb usb7: Manufacturer: Linux 2.6.32-1-mepis-smp ohci_hcd usb usb7: SerialNumber: 0000:07:00.1 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected intel8x0_measure_ac97_clock: measured 52774 usecs (2543 samples) intel8x0: clocking to 48000 pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 pci 0000:08:00.0: reg 10 32bit mmio: [0x000000-0x00ffff] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. cfg80211: Using static regulatory domain info cfg80211: Regulatory domain: US (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) cfg80211: Calling CRDA for country: US ath5k 0000:08:00.0: enabling device (0000 -> 0002) ath5k 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 ath5k 0000:08:00.0: registered as 'phy0' usb 7-1: new full speed USB device using ohci_hcd and address 2 usb 7-1: New USB device found, idVendor=046d, idProduct=c52f usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 7-1: Product: USB Receiver usb 7-1: Manufacturer: Logitech usb 7-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb7/7-1/7-1:1.0/input/input9 generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:07:00.1-1/input0 input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb7/7-1/7-1:1.1/input/input10 generic-usb 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.1-1/input1 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver ath: EEPROM regdomain: 0x0 ath: EEPROM indicates default country code should be used ath: doing EEPROM country->regdmn map search ath: country maps to regdmn code: 0x3a ath: Country alpha2 being used: US ath: Regpair used: 0x3a phy0: Selected rate control algorithm 'minstrel' ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43) ath5k phy0: RF5112B multiband radio found (0x36) cfg80211: Calling CRDA for country: US EXT3 FS on sda2, internal journal Adding 2882552k swap on /dev/sda3. Priority:1 extents:1 across:2882552k SS fuse init (API version 7.13) sky2 eth0: enabling interface ADDRCONF(NETDEV_UP): eth0: link is not ready lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver [drm] Initialized drm 1.1.0 20060810 pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 usb 1-1: new high speed USB device using ehci_hcd and address 2 usb 1-1: New USB device found, idVendor=1aa6, idProduct=0201 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: Pen Drive usb 1-1: Manufacturer: eFortune usb 1-1: SerialNumber: 5940314711321 usb 1-1: configuration #1 chosen from 1 choice scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 2:0:0:0: Direct-Access eFortune Pen Drive 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdb] 1990656 512-byte logical blocks: (1.01 GB/972 MiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] Attached SCSI removable disk lspci -vvv 00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04) Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) (prog-if 00 [VGA controller]) Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- [disabled] Capabilities: [d0] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag+ RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Slot #2, PowerLimit 6.500W; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Address: fee0100c Data: 4161 Capabilities: [90] Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338 Capabilities: [a0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [100 v1] Virtual Channel Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 Arb: Fixed+ WRR32- WRR64- WRR128- Ctrl: ArbSelect=Fixed Status: InProgress- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 Status: NegoPending- InProgress- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 Status: NegoPending- InProgress- Capabilities: [180 v1] Root Complex Link Desc: PortNumber=01 ComponentID=02 EltType=Config Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ Addr: 00000000fed1c001 Kernel driver in use: pcieport 00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI]) Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [50] Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338 00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04) Subsystem: Matsushita Electric Industrial Co., Ltd. Device 834c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 06:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8b) Subsystem: Matsushita Electric Industrial Co., Ltd. Panasonic CF-Y5 laptop Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Reset- 16bInt- PostWrite+ 16-bit legacy interface ports at 0001 Kernel driver in use: yenta_cardbus 06:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 11) Subsystem: Matsushita Electric Industrial Co., Ltd. Panasonic CF-Y5 laptop Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-