| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1571254641-13626-5-git-send-email-thara.gopinath@linaro.org>
Date: Wed, 16 Oct 2019 15:37:18 -0400
From: Thara Gopinath <thara.gopinath@...aro.org>
To: edubezval@...il.com, rui.zhang@...el.com, ulf.hansson@...aro.org,
daniel.lezcano@...aro.org, bjorn.andersson@...aro.org,
agross@...nel.org
Cc: amit.kucheria@...durent.com, mark.rutland@....com,
rjw@...ysocki.net, linux-pm@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 4/7] thermal: Add generic power domain warming device driver.
Resources modeled as power domains in linux kenrel
can be used to warm the SoC(eg. mx power domain on sdm845).
To support this feature, introduce a generic power domain
warming device driver that can be plugged into the thermal framework
(The thermal framework itself requires further modifiction to
support a warming device in place of a cooling device.
Those extensions are not introduced in this patch series).
Signed-off-by: Thara Gopinath <thara.gopinath@...aro.org>
---
drivers/thermal/Kconfig | 10 +++
drivers/thermal/Makefile | 2 +
drivers/thermal/pwr_domain_warming.c | 136 +++++++++++++++++++++++++++++++++++
include/linux/pwr_domain_warming.h | 31 ++++++++
4 files changed, 179 insertions(+)
create mode 100644 drivers/thermal/pwr_domain_warming.c
create mode 100644 include/linux/pwr_domain_warming.h
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 001a21a..0c5c93e 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -187,6 +187,16 @@ config DEVFREQ_THERMAL
If you want this support, you should say Y here.
+config PWR_DOMAIN_WARMING_THERMAL
+ bool "Power Domain based warming device"
+ depends on PM_GENERIC_DOMAINS_OF
+ help
+ This implements the generic power domain based warming
+ mechanism through increasing the performance state of
+ a power domain.
+
+ If you want this support, you should say Y here.
+
config THERMAL_EMULATION
bool "Thermal emulation mode support"
help
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 74a37c7..382c64a 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -27,6 +27,8 @@ thermal_sys-$(CONFIG_CLOCK_THERMAL) += clock_cooling.o
# devfreq cooling
thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o
+thermal_sys-$(CONFIG_PWR_DOMAIN_WARMING_THERMAL) += pwr_domain_warming.o
+
# platform thermal drivers
obj-y += broadcom/
obj-$(CONFIG_THERMAL_MMIO) += thermal_mmio.o
diff --git a/drivers/thermal/pwr_domain_warming.c b/drivers/thermal/pwr_domain_warming.c
new file mode 100644
index 0000000..60fae3e
--- /dev/null
+++ b/drivers/thermal/pwr_domain_warming.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd
+ */
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+#include <linux/pwr_domain_warming.h>
+
+struct pd_warming_device {
+ struct thermal_cooling_device *cdev;
+ struct generic_pm_domain *gpd;
+ struct device *dev;
+ int max_state;
+ int cur_state;
+ bool runtime_resumed;
+};
+
+static int pd_wdev_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct pd_warming_device *pd_wdev = cdev->devdata;
+
+ *state = pd_wdev->max_state;
+ return 0;
+}
+
+static int pd_wdev_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct pd_warming_device *pd_wdev = cdev->devdata;
+
+ *state = dev_pm_genpd_get_performance_state(pd_wdev->dev);
+
+ return 0;
+}
+
+static int pd_wdev_set_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long state)
+{
+ struct pd_warming_device *pd_wdev = cdev->devdata;
+ struct device *dev = pd_wdev->dev;
+ int ret;
+
+ ret = dev_pm_genpd_set_performance_state(dev, state);
+
+ if (ret)
+ return ret;
+
+ if (state && !pd_wdev->runtime_resumed) {
+ ret = pm_runtime_get_sync(dev);
+ pd_wdev->runtime_resumed = true;
+ } else if (!state && pd_wdev->runtime_resumed) {
+ ret = pm_runtime_put(dev);
+ pd_wdev->runtime_resumed = false;
+ }
+
+ return ret;
+}
+
+static int pd_wdev_late_init(struct thermal_cooling_device *cdev)
+{
+ struct pd_warming_device *pd_wdev = cdev->devdata;
+ struct device *dev = &cdev->device;
+ int state_count, ret;
+
+ ret = pm_genpd_add_device(pd_wdev->gpd, dev);
+
+ if (ret)
+ return ret;
+
+ state_count = dev_pm_genpd_performance_state_count(dev);
+ if (state_count < 0)
+ return state_count;
+
+ pm_runtime_enable(dev);
+
+ pd_wdev->dev = dev;
+ pd_wdev->max_state = state_count - 1;
+
+ return 0;
+}
+
+static struct thermal_cooling_device_ops pd_warming_device_ops = {
+ .late_init = pd_wdev_late_init,
+ .get_max_state = pd_wdev_get_max_state,
+ .get_cur_state = pd_wdev_get_cur_state,
+ .set_cur_state = pd_wdev_set_cur_state,
+};
+
+struct thermal_cooling_device *
+pwr_domain_warming_register(struct device_node *node,
+ struct generic_pm_domain *gpd)
+{
+ struct pd_warming_device *pd_wdev;
+
+ pd_wdev = kzalloc(sizeof(*pd_wdev), GFP_KERNEL);
+ if (!pd_wdev)
+ return ERR_PTR(-ENOMEM);
+
+ pd_wdev->runtime_resumed = false;
+ pd_wdev->gpd = gpd;
+
+ pd_wdev->cdev = thermal_of_cooling_device_register
+ (node, gpd->name, pd_wdev,
+ &pd_warming_device_ops);
+ if (IS_ERR(pd_wdev->cdev)) {
+ pr_err("unable to register %s cooling device\n", gpd->name);
+ if (pd_wdev->dev)
+ pm_runtime_disable(pd_wdev->dev);
+ }
+
+ return pd_wdev->cdev;
+}
+EXPORT_SYMBOL_GPL(pwr_domain_warming_register);
+
+void pwr_domain_warming_unregister(struct thermal_cooling_device *cdev)
+{
+ struct pd_warming_device *pd_wdev = cdev->devdata;
+ struct device *dev = pd_wdev->dev;
+
+ if (pd_wdev->runtime_resumed) {
+ dev_pm_genpd_set_performance_state(dev, 0);
+ pm_runtime_put(dev);
+ pd_wdev->runtime_resumed = false;
+ }
+ pm_runtime_disable(pd_wdev->dev);
+ thermal_cooling_device_unregister(cdev);
+ kfree(pd_wdev);
+}
+EXPORT_SYMBOL_GPL(pwr_domain_warming_unregister);
diff --git a/include/linux/pwr_domain_warming.h b/include/linux/pwr_domain_warming.h
new file mode 100644
index 0000000..ed9942b
--- /dev/null
+++ b/include/linux/pwr_domain_warming.h
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019, Linaro Ltd.
+ */
+#ifndef __PWR_DOMAIN_WARMING_H__
+#define __PWR_DOMAIN_WARMING_H__
+
+#include <linux/pm_domain.h>
+#include <linux/thermal.h>
+
+#ifdef CONFIG_PWR_DOMAIN_WARMING_THERMAL
+struct thermal_cooling_device *
+pwr_domain_warming_register(struct device_node *node,
+ struct generic_pm_domain *gpd);
+
+void pwr_domain_warming_unregister(struct thermal_cooling_device *cdev);
+
+#else
+static inline struct thermal_cooling_device *
+pwr_domain_warming_register(struct device_node *node,
+ struct generic_pm_domain *gpd)
+{
+ return ERR_PTR(-ENOSYS);
+}
+
+static inline void
+pwr_domain_warming_unregister(struct thermal_cooling_device *cdev)
+{
+}
+#endif /* CONFIG_PWR_DOMAIN_WARMING_THERMAL */
+#endif /* __PWR_DOMAIN_WARMING_H__ */
--
2.1.4
Powered by blists - more mailing lists