[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191016214836.824184063@linuxfoundation.org>
Date: Wed, 16 Oct 2019 14:51:05 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Kent Gibson <warthog618@...il.com>,
Bartosz Golaszewski <bgolaszewski@...libre.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.14 51/65] gpiolib: dont clear FLAG_IS_OUT when emulating open-drain/open-source
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
[ Upstream commit e735244e2cf068f98b6384681a38993e0517a838 ]
When emulating open-drain/open-source by not actively driving the output
lines - we're simply changing their mode to input. This is wrong as it
will then make it impossible to change the value of such line - it's now
considered to actually be in input mode. If we want to still use the
direction_input() callback for simplicity then we need to set FLAG_IS_OUT
manually in gpiod_direction_output() and not clear it in
gpio_set_open_drain_value_commit() and
gpio_set_open_source_value_commit().
Fixes: c663e5f56737 ("gpio: support native single-ended hardware drivers")
Cc: stable@...r.kernel.org
Reported-by: Kent Gibson <warthog618@...il.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
[Bartosz: backported to v4.14]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/gpio/gpiolib.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index f1809a54fceeb..c7f5f0be2d749 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2329,8 +2329,10 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
if (!ret)
goto set_output_value;
/* Emulate open drain by not actively driving the line high */
- if (val)
- return gpiod_direction_input(desc);
+ if (val) {
+ ret = gpiod_direction_input(desc);
+ goto set_output_flag;
+ }
}
else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
@@ -2338,8 +2340,10 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
if (!ret)
goto set_output_value;
/* Emulate open source by not actively driving the line low */
- if (!val)
- return gpiod_direction_input(desc);
+ if (!val) {
+ ret = gpiod_direction_input(desc);
+ goto set_output_flag;
+ }
} else {
gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
PIN_CONFIG_DRIVE_PUSH_PULL);
@@ -2359,6 +2363,17 @@ static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
trace_gpio_value(desc_to_gpio(desc), 0, val);
trace_gpio_direction(desc_to_gpio(desc), 0, ret);
return ret;
+
+set_output_flag:
+ /*
+ * When emulating open-source or open-drain functionalities by not
+ * actively driving the line (setting mode to input) we still need to
+ * set the IS_OUT flag or otherwise we won't be able to set the line
+ * value anymore.
+ */
+ if (ret == 0)
+ set_bit(FLAG_IS_OUT, &desc->flags);
+ return ret;
}
/**
@@ -2540,8 +2555,6 @@ static void _gpio_set_open_drain_value(struct gpio_desc *desc, bool value)
if (value) {
err = chip->direction_input(chip, offset);
- if (!err)
- clear_bit(FLAG_IS_OUT, &desc->flags);
} else {
err = chip->direction_output(chip, offset, 0);
if (!err)
@@ -2571,8 +2584,6 @@ static void _gpio_set_open_source_value(struct gpio_desc *desc, bool value)
set_bit(FLAG_IS_OUT, &desc->flags);
} else {
err = chip->direction_input(chip, offset);
- if (!err)
- clear_bit(FLAG_IS_OUT, &desc->flags);
}
trace_gpio_direction(desc_to_gpio(desc), !value, err);
if (err < 0)
--
2.20.1
Powered by blists - more mailing lists