[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191016214839.304855343@linuxfoundation.org>
Date: Wed, 16 Oct 2019 14:50:56 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Andreas Klinger <ak@...klinger.de>,
Stable@...r.kernel.org,
Jonathan Cameron <Jonathan.Cameron@...wei.com>
Subject: [PATCH 4.19 45/81] iio: adc: hx711: fix bug in sampling of data
From: Andreas Klinger <ak@...klinger.de>
commit 4043ecfb5fc4355a090111e14faf7945ff0fdbd5 upstream.
Fix bug in sampling function hx711_cycle() when interrupt occures while
PD_SCK is high. If PD_SCK is high for at least 60 us power down mode of
the sensor is entered which in turn leads to a wrong measurement.
Switch off interrupts during a PD_SCK high period and move query of DOUT
to the latest point of time which is at the end of PD_SCK low period.
This bug exists in the driver since it's initial addition. The more
interrupts on the system the higher is the probability that it happens.
Fixes: c3b2fdd0ea7e ("iio: adc: hx711: Add IIO driver for AVIA HX711")
Signed-off-by: Andreas Klinger <ak@...klinger.de>
Cc: <Stable@...r.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/iio/adc/hx711.c | 10 +++++-----
1 file changed, 5 insertions(+), 5 deletions(-)
--- a/drivers/iio/adc/hx711.c
+++ b/drivers/iio/adc/hx711.c
@@ -109,14 +109,14 @@ struct hx711_data {
static int hx711_cycle(struct hx711_data *hx711_data)
{
- int val;
+ unsigned long flags;
/*
* if preempted for more then 60us while PD_SCK is high:
* hx711 is going in reset
* ==> measuring is false
*/
- preempt_disable();
+ local_irq_save(flags);
gpiod_set_value(hx711_data->gpiod_pd_sck, 1);
/*
@@ -126,7 +126,6 @@ static int hx711_cycle(struct hx711_data
*/
ndelay(hx711_data->data_ready_delay_ns);
- val = gpiod_get_value(hx711_data->gpiod_dout);
/*
* here we are not waiting for 0.2 us as suggested by the datasheet,
* because the oscilloscope showed in a test scenario
@@ -134,7 +133,7 @@ static int hx711_cycle(struct hx711_data
* and 0.56 us for PD_SCK low on TI Sitara with 800 MHz
*/
gpiod_set_value(hx711_data->gpiod_pd_sck, 0);
- preempt_enable();
+ local_irq_restore(flags);
/*
* make it a square wave for addressing cases with capacitance on
@@ -142,7 +141,8 @@ static int hx711_cycle(struct hx711_data
*/
ndelay(hx711_data->data_ready_delay_ns);
- return val;
+ /* sample as late as possible */
+ return gpiod_get_value(hx711_data->gpiod_dout);
}
static int hx711_read(struct hx711_data *hx711_data)
Powered by blists - more mailing lists