[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191016214805.498638552@linuxfoundation.org>
Date: Wed, 16 Oct 2019 14:49:41 -0700
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org, Sean Nyekjaer <sean@...nix.com>,
Marc Kleine-Budde <mkl@...gutronix.de>
Subject: [PATCH 4.9 08/92] can: mcp251x: mcp251x_hw_reset(): allow more time after a reset
From: Marc Kleine-Budde <mkl@...gutronix.de>
commit d84ea2123f8d27144e3f4d58cd88c9c6ddc799de upstream.
Some boards take longer than 5ms to power up after a reset, so allow
some retries attempts before giving up.
Fixes: ff06d611a31c ("can: mcp251x: Improve mcp251x_hw_reset()")
Cc: linux-stable <stable@...r.kernel.org>
Tested-by: Sean Nyekjaer <sean@...nix.com>
Signed-off-by: Marc Kleine-Budde <mkl@...gutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
drivers/net/can/spi/mcp251x.c | 19 ++++++++++++++-----
1 file changed, 14 insertions(+), 5 deletions(-)
--- a/drivers/net/can/spi/mcp251x.c
+++ b/drivers/net/can/spi/mcp251x.c
@@ -627,7 +627,7 @@ static int mcp251x_setup(struct net_devi
static int mcp251x_hw_reset(struct spi_device *spi)
{
struct mcp251x_priv *priv = spi_get_drvdata(spi);
- u8 reg;
+ unsigned long timeout;
int ret;
/* Wait for oscillator startup timer after power up */
@@ -641,10 +641,19 @@ static int mcp251x_hw_reset(struct spi_d
/* Wait for oscillator startup timer after reset */
mdelay(MCP251X_OST_DELAY_MS);
- reg = mcp251x_read_reg(spi, CANSTAT);
- if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
- return -ENODEV;
-
+ /* Wait for reset to finish */
+ timeout = jiffies + HZ;
+ while ((mcp251x_read_reg(spi, CANSTAT) & CANCTRL_REQOP_MASK) !=
+ CANCTRL_REQOP_CONF) {
+ usleep_range(MCP251X_OST_DELAY_MS * 1000,
+ MCP251X_OST_DELAY_MS * 1000 * 2);
+
+ if (time_after(jiffies, timeout)) {
+ dev_err(&spi->dev,
+ "MCP251x didn't enter in conf mode after reset\n");
+ return -EBUSY;
+ }
+ }
return 0;
}
Powered by blists - more mailing lists