[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20191016080802.GY3125@piout.net>
Date: Wed, 16 Oct 2019 10:08:02 +0200
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Kamel Bouhara <kamel.bouhara@...tlin.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Ludovic Desroches <ludovic.desroches@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/3] Add new Overkiz Kizbox3 support
On 11/10/2019 14:50:19+0200, Kamel Bouhara wrote:
> Add support for the Kizbox3 Overkiz SAS boards.
> Those boards are based on the Atmel SAMA5D27 SoC.
>
> Kamel Bouhara (3):
> dt-bindings: Add vendor prefix for Overkiz SAS
> dt-bindings: arm: at91: Document Kizbox3 HS board binding
> ARM: at91: add Overkiz KIZBOX3 board
>
> .../devicetree/bindings/arm/atmel-at91.yaml | 7 +
> .../devicetree/bindings/vendor-prefixes.yaml | 2 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/at91-kizbox3-hs.dts | 309 +++++++++++++
> arch/arm/boot/dts/at91-kizbox3_common.dtsi | 412 ++++++++++++++++++
> 5 files changed, 731 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-kizbox3-hs.dts
> create mode 100644 arch/arm/boot/dts/at91-kizbox3_common.dtsi
>
All applied, thanks.
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists