linux-kernel - [PATCH v7 3/5] serial: fsl_linflexuart: Be consistent with the name

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1571230107-8493-4-git-send-email-stefan-gabriel.mirea@nxp.com>
Date:   Wed, 16 Oct 2019 15:48:25 +0300
From:   Stefan-Gabriel Mirea <stefan-gabriel.mirea@....com>
To:     corbet@....net, robh+dt@...nel.org, mark.rutland@....com,
        gregkh@...uxfoundation.org, catalin.marinas@....com,
        will@...nel.org, shawnguo@...nel.org, leoyang.li@....com
Cc:     jslaby@...e.com, linux-doc@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        linux-serial@...r.kernel.org, linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v7 3/5] serial: fsl_linflexuart: Be consistent with the name

For consistency reasons, spell the controller name as "LINFlexD" in
comments and documentation.

Signed-off-by: Stefan-Gabriel Mirea <stefan-gabriel.mirea@....com>
---
 Documentation/admin-guide/kernel-parameters.txt | 2 +-
 drivers/tty/serial/Kconfig                      | 8 ++++----
 drivers/tty/serial/fsl_linflexuart.c            | 4 ++--
 include/uapi/linux/serial_core.h                | 2 +-
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a84a83f8881e..6dbd871493af 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1101,7 +1101,7 @@
 			mapped with the correct attributes.
 
 		linflex,<addr>
-			Use early console provided by Freescale LinFlex UART
+			Use early console provided by Freescale LINFlexD UART
 			serial driver for NXP S32V234 SoCs. A valid base
 			address must be provided, and the serial port must
 			already be setup and configured.
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 67a9eb3f94ce..c07c2667a2e4 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1392,19 +1392,19 @@ config SERIAL_FSL_LPUART_CONSOLE
 	  you can make it the console by answering Y to this option.
 
 config SERIAL_FSL_LINFLEXUART
-	tristate "Freescale linflexuart serial port support"
+	tristate "Freescale LINFlexD UART serial port support"
 	depends on PRINTK
 	select SERIAL_CORE
 	help
-	  Support for the on-chip linflexuart on some Freescale SOCs.
+	  Support for the on-chip LINFlexD UART on some Freescale SOCs.
 
 config SERIAL_FSL_LINFLEXUART_CONSOLE
-	bool "Console on Freescale linflexuart serial port"
+	bool "Console on Freescale LINFlexD UART serial port"
 	depends on SERIAL_FSL_LINFLEXUART=y
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 	help
-	  If you have enabled the linflexuart serial port on the Freescale
+	  If you have enabled the LINFlexD UART serial port on the Freescale
 	  SoCs, you can make it the console by answering Y to this option.
 
 config SERIAL_CONEXANT_DIGICOLOR
diff --git a/drivers/tty/serial/fsl_linflexuart.c b/drivers/tty/serial/fsl_linflexuart.c
index a32f0d2afd59..205c31a61684 100644
--- a/drivers/tty/serial/fsl_linflexuart.c
+++ b/drivers/tty/serial/fsl_linflexuart.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-or-later
 /*
- * Freescale linflexuart serial port driver
+ * Freescale LINFlexD UART serial port driver
  *
  * Copyright 2012-2016 Freescale Semiconductor, Inc.
  * Copyright 2017-2019 NXP
@@ -940,5 +940,5 @@ static void __exit linflex_serial_exit(void)
 module_init(linflex_serial_init);
 module_exit(linflex_serial_exit);
 
-MODULE_DESCRIPTION("Freescale linflex serial port driver");
+MODULE_DESCRIPTION("Freescale LINFlexD serial port driver");
 MODULE_LICENSE("GPL v2");
diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h
index e7fe550b6038..8ec3dd742ea4 100644
--- a/include/uapi/linux/serial_core.h
+++ b/include/uapi/linux/serial_core.h
@@ -290,7 +290,7 @@
 /* Sunix UART */
 #define PORT_SUNIX	121
 
-/* Freescale Linflex UART */
+/* Freescale LINFlexD UART */
 #define PORT_LINFLEXUART	122
 
 #endif /* _UAPILINUX_SERIAL_CORE_H */
-- 
2.22.0