linux-kernel - [PATCH v3 4/8] dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1571293310-92563-5-git-send-email-manish.narani@xilinx.com>
Date:   Thu, 17 Oct 2019 11:51:46 +0530
From:   Manish Narani <manish.narani@...inx.com>
To:     ulf.hansson@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
        adrian.hunter@...el.com, michal.simek@...inx.com,
        jolly.shah@...inx.com, rajan.vaja@...inx.com,
        nava.manne@...inx.com, mdf@...nel.org, manish.narani@...inx.com
Cc:     linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        git@...inx.com
Subject: [PATCH v3 4/8] dt-bindings: mmc: arasan: Add optional properties for Arasan SDHCI

Add optional propeties for Arasan SDHCI which are used to set clk delays
for different speed modes in the controller.

Signed-off-by: Manish Narani <manish.narani@...inx.com>
---
 .../devicetree/bindings/mmc/arasan,sdhci.txt      | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
index b51e40b2e0c5..e0369dd7fb18 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.txt
@@ -46,6 +46,21 @@ Optional Properties:
     properly. Test mode can be used to force the controller to function.
   - xlnx,int-clock-stable-broken: when present, the controller always reports
     that the internal clock is stable even when it is not.
+  - clk-phase-legacy: Input/Output Clock Delay pair in degrees for Legacy Mode.
+  - clk-phase-mmc-hs: Input/Output Clock Delay pair degrees for MMC HS.
+  - clk-phase-sd-hs: Input/Output Clock Delay pair in degrees for SD HS.
+  - clk-phase-uhs-sdr12: Input/Output Clock Delay pair in degrees for SDR12.
+  - clk-phase-uhs-sdr25: Input/Output Clock Delay pair in degrees for SDR25.
+  - clk-phase-uhs-sdr50: Input/Output Clock Delay pair in degrees for SDR50.
+  - clk-phase-uhs-sdr104: Input/Output Clock Delay pair in degrees for SDR104.
+  - clk-phase-uhs-ddr50: Input/Output Clock Delay pair in degrees for SD DDR50.
+  - clk-phase-mmc-ddr52: Input/Output Clock Delay pair in degrees for MMC DDR52.
+  - clk-phase-mmc-hs200: Input/Output Clock Delay pair in degrees for MMC HS200.
+  - clk-phase-mmc-hs400: Input/Output Clock Delay pair in degrees for MMC HS400.
+
+  Above mentioned are the clock (phase) delays which are to be configured in the
+  controller while switching to particular speed mode. If not specified, driver
+  will configure the default value defined for particular mode in it.
 
 Example:
 	sdhci@...00000 {
-- 
2.17.1