| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1571313682-28900-2-git-send-email-sheetal.tigadoli@broadcom.com>
Date: Thu, 17 Oct 2019 17:31:20 +0530
From: Sheetal Tigadoli <sheetal.tigadoli@...adcom.com>
To: Rafał Miłecki <zajec5@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Michal Simek <michal.simek@...inx.com>,
Rajan Vaja <rajan.vaja@...inx.com>,
Scott Branden <scott.branden@...adcom.com>,
Ray Jui <ray.jui@...adcom.com>,
Vikram Prakash <vikram.prakash@...adcom.com>,
Jens Wiklander <jens.wiklander@...aro.org>,
Michael Chan <michael.chan@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Vikas Gupta <vikas.gupta@...adcom.com>,
Vasundhara Volam <vasundhara-v.volam@...adcom.com>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
tee-dev@...ts.linaro.org, bcm-kernel-feedback-list@...adcom.com,
netdev@...r.kernel.org,
Sheetal Tigadoli <sheetal.tigadoli@...adcom.com>
Subject: [PATCH V2 1/3] firmware: broadcom: add OP-TEE based BNXT f/w manager
From: Vikas Gupta <vikas.gupta@...adcom.com>
This driver registers on TEE bus to interact with OP-TEE based
BNXT firmware management modules
Signed-off-by: Vikas Gupta <vikas.gupta@...adcom.com>
Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@...adcom.com>
---
drivers/firmware/broadcom/Kconfig | 8 +
drivers/firmware/broadcom/Makefile | 1 +
drivers/firmware/broadcom/tee_bnxt_fw.c | 283 ++++++++++++++++++++++++++
include/linux/firmware/broadcom/tee_bnxt_fw.h | 14 ++
4 files changed, 306 insertions(+)
create mode 100644 drivers/firmware/broadcom/tee_bnxt_fw.c
create mode 100644 include/linux/firmware/broadcom/tee_bnxt_fw.h
diff --git a/drivers/firmware/broadcom/Kconfig b/drivers/firmware/broadcom/Kconfig
index d03ed8e..79505ad 100644
--- a/drivers/firmware/broadcom/Kconfig
+++ b/drivers/firmware/broadcom/Kconfig
@@ -22,3 +22,11 @@ config BCM47XX_SPROM
In case of SoC devices SPROM content is stored on a flash used by
bootloader firmware CFE. This driver provides method to ssb and bcma
drivers to read SPROM on SoC.
+
+config TEE_BNXT_FW
+ bool "Broadcom BNXT firmware manager"
+ depends on (ARCH_BCM_IPROC && OPTEE) || COMPILE_TEST
+ default ARCH_BCM_IPROC
+ help
+ This module help to manage firmware on Broadcom BNXT device. The module
+ registers on tee bus and invoke calls to manage firmware on BNXT device.
diff --git a/drivers/firmware/broadcom/Makefile b/drivers/firmware/broadcom/Makefile
index 72c7fdc..17c5061 100644
--- a/drivers/firmware/broadcom/Makefile
+++ b/drivers/firmware/broadcom/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_BCM47XX_NVRAM) += bcm47xx_nvram.o
obj-$(CONFIG_BCM47XX_SPROM) += bcm47xx_sprom.o
+obj-$(CONFIG_TEE_BNXT_FW) += tee_bnxt_fw.o
diff --git a/drivers/firmware/broadcom/tee_bnxt_fw.c b/drivers/firmware/broadcom/tee_bnxt_fw.c
new file mode 100644
index 0000000..1e1e54c
--- /dev/null
+++ b/drivers/firmware/broadcom/tee_bnxt_fw.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 Broadcom.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/tee_drv.h>
+#include <linux/uuid.h>
+
+#include <linux/firmware/broadcom/tee_bnxt_fw.h>
+
+#define MAX_SHM_MEM_SZ SZ_4M
+
+#define MAX_TEE_PARAM_ARRY_MEMB 4
+
+#define HANDLE_ERROR(ret, tee_ret, cmd) \
+do { \
+ if ((ret < 0) || (tee_ret != 0)) { \
+ dev_err(pvt_data.dev, \
+ #cmd " invoke failed TEE err: %x, ret:%x\n", \
+ tee_ret, ret); \
+ return -EINVAL; \
+ } \
+} while (0)
+
+enum ta_cmd {
+ /*
+ * TA_CMD_BNXT_FASTBOOT - boot bnxt device by copying f/w into sram
+ *
+ * param[0] unused
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_ITEM_NOT_FOUND - Corrupt f/w image found on memory
+ */
+ TA_CMD_BNXT_FASTBOOT = 0,
+
+ /*
+ * TA_CMD_BNXT_COPY_COREDUMP - copy the core dump into shm
+ *
+ * param[0] (in value) - value.a: offset, data to be copied from
+ * value.b: size of the data
+ * param[1] unused
+ * param[2] unused
+ * param[3] unused
+ *
+ * Result:
+ * TEE_SUCCESS - Invoke command success
+ * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
+ * TEE_ERROR_ITEM_NOT_FOUND - Corrupt core dump
+ */
+ TA_CMD_BNXT_COPY_COREDUMP = 3,
+};
+
+/**
+ * struct tee_bnxt_fw_private - OP-TEE bnxt private data
+ * @dev: OP-TEE based bnxt device.
+ * @ctx: OP-TEE context handler.
+ * @session_id: TA session identifier.
+ */
+struct tee_bnxt_fw_private {
+ struct device *dev;
+ struct tee_context *ctx;
+ u32 session_id;
+ struct tee_shm *fw_shm_pool;
+};
+
+static struct tee_bnxt_fw_private pvt_data;
+
+static inline void prepare_args(int cmd,
+ struct tee_ioctl_invoke_arg *inv_arg,
+ struct tee_param *param)
+{
+ memset(inv_arg, 0, sizeof(*inv_arg));
+ memset(param, 0, (MAX_TEE_PARAM_ARRY_MEMB * sizeof(*param)));
+
+ inv_arg->func = cmd;
+ inv_arg->session = pvt_data.session_id;
+ inv_arg->num_params = MAX_TEE_PARAM_ARRY_MEMB;
+
+ /* Fill invoke cmd params */
+ switch (cmd) {
+ case TA_CMD_BNXT_COPY_COREDUMP:
+ param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT;
+ param[0].u.memref.shm = pvt_data.fw_shm_pool;
+ param[0].u.memref.size = MAX_SHM_MEM_SZ;
+ param[0].u.memref.shm_offs = 0;
+ param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
+ break;
+ case TA_CMD_BNXT_FASTBOOT:
+ default:
+ /* Nothing to do */
+ break;
+ }
+}
+
+/**
+ * tee_bnxt_fw_load() - Load the bnxt firmware
+ * Uses an OP-TEE call to start a secure
+ * boot process.
+ * Returns 0 on success, negative errno otherwise.
+ */
+int tee_bnxt_fw_load(void)
+{
+ int ret = 0;
+ struct tee_ioctl_invoke_arg inv_arg;
+ struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
+
+ if (!pvt_data.ctx)
+ return -ENODEV;
+
+ prepare_args(TA_CMD_BNXT_FASTBOOT, &inv_arg, param);
+
+ ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
+ HANDLE_ERROR(ret, inv_arg.ret, TA_CMD_BNXT_FASTBOOT);
+
+ return 0;
+}
+EXPORT_SYMBOL(tee_bnxt_fw_load);
+
+/**
+ * tee_bnxt_copy_coredump() - Copy coredump from the allocated memory
+ * Uses an OP-TEE call to copy coredump
+ * @buf: desintation buffer where core dump is copied into
+ * @offset: offset from the base address of core dump area
+ * @size: size of the dump
+ *
+ * Returns 0 on success, negative errno otherwise.
+ */
+int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size)
+{
+ struct tee_ioctl_invoke_arg inv_arg;
+ struct tee_param param[MAX_TEE_PARAM_ARRY_MEMB];
+ void *core_data;
+ u32 rbytes = size;
+ u32 nbytes = 0;
+ int ret = 0;
+
+ if (!pvt_data.ctx)
+ return -ENODEV;
+
+ if (!buf)
+ return -EINVAL;
+
+ prepare_args(TA_CMD_BNXT_COPY_COREDUMP, &inv_arg, param);
+
+ while (rbytes) {
+ nbytes = rbytes;
+
+ nbytes = min_t(u32, rbytes, param[0].u.memref.size);
+
+ /* Fill additional invoke cmd params */
+ param[1].u.value.a = offset;
+ param[1].u.value.b = nbytes;
+
+ ret = tee_client_invoke_func(pvt_data.ctx, &inv_arg, param);
+ HANDLE_ERROR(ret, inv_arg.ret, TA_CMD_BNXT_COPY_COREDUMP);
+
+ core_data = tee_shm_get_va(pvt_data.fw_shm_pool, 0);
+ if (IS_ERR(core_data)) {
+ dev_err(pvt_data.dev, "tee_shm_get_va failed\n");
+ return PTR_ERR(core_data);
+ }
+
+ memcpy(buf, core_data, nbytes);
+
+ rbytes -= nbytes;
+ buf += nbytes;
+ offset += nbytes;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(tee_bnxt_copy_coredump);
+
+static int optee_ctx_match(struct tee_ioctl_version_data *ver, const void *data)
+{
+ if (ver->impl_id == TEE_IMPL_ID_OPTEE)
+ return 1;
+ else
+ return 0;
+}
+
+static int tee_bnxt_fw_probe(struct device *dev)
+{
+ struct tee_client_device *bnxt_device = to_tee_client_device(dev);
+ int ret, err = -ENODEV;
+ struct tee_ioctl_open_session_arg sess_arg;
+ struct tee_shm *fw_shm_pool;
+
+ memset(&sess_arg, 0, sizeof(sess_arg));
+
+ /* Open context with TEE driver */
+ pvt_data.ctx = tee_client_open_context(NULL, optee_ctx_match, NULL,
+ NULL);
+ if (IS_ERR(pvt_data.ctx))
+ return -ENODEV;
+
+ /* Open session with Bnxt load Trusted App */
+ memcpy(sess_arg.uuid, bnxt_device->id.uuid.b, TEE_IOCTL_UUID_LEN);
+ sess_arg.clnt_login = TEE_IOCTL_LOGIN_PUBLIC;
+ sess_arg.num_params = 0;
+
+ ret = tee_client_open_session(pvt_data.ctx, &sess_arg, NULL);
+ if ((ret < 0) || (sess_arg.ret != 0)) {
+ dev_err(dev, "tee_client_open_session failed, err: %x\n",
+ sess_arg.ret);
+ err = -EINVAL;
+ goto out_ctx;
+ }
+ pvt_data.session_id = sess_arg.session;
+
+ pvt_data.dev = dev;
+
+ fw_shm_pool = tee_shm_alloc(pvt_data.ctx, MAX_SHM_MEM_SZ,
+ TEE_SHM_MAPPED | TEE_SHM_DMA_BUF);
+ if (IS_ERR(fw_shm_pool)) {
+ tee_client_close_context(pvt_data.ctx);
+ dev_err(pvt_data.dev, "tee_shm_alloc failed\n");
+ err = PTR_ERR(fw_shm_pool);
+ goto out_sess;
+ }
+
+ pvt_data.fw_shm_pool = fw_shm_pool;
+
+ return 0;
+
+out_sess:
+ tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+out_ctx:
+ tee_client_close_context(pvt_data.ctx);
+
+ return err;
+}
+
+static int tee_bnxt_fw_remove(struct device *dev)
+{
+ tee_client_close_session(pvt_data.ctx, pvt_data.session_id);
+ tee_client_close_context(pvt_data.ctx);
+ pvt_data.ctx = NULL;
+
+ return 0;
+}
+
+static const struct tee_client_device_id tee_bnxt_fw_id_table[] = {
+ {UUID_INIT(0x6272636D, 0x2019, 0x0716,
+ 0x42, 0x43, 0x4D, 0x5F, 0x53, 0x43, 0x48, 0x49)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(tee, tee_bnxt_fw_id_table);
+
+static struct tee_client_driver tee_bnxt_fw_driver = {
+ .id_table = tee_bnxt_fw_id_table,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .bus = &tee_bus_type,
+ .probe = tee_bnxt_fw_probe,
+ .remove = tee_bnxt_fw_remove,
+ },
+};
+
+static int __init tee_bnxt_fw_mod_init(void)
+{
+ return driver_register(&tee_bnxt_fw_driver.driver);
+}
+
+static void __exit tee_bnxt_fw_mod_exit(void)
+{
+ driver_unregister(&tee_bnxt_fw_driver.driver);
+}
+
+module_init(tee_bnxt_fw_mod_init);
+module_exit(tee_bnxt_fw_mod_exit);
+
+MODULE_AUTHOR("Broadcom");
+MODULE_DESCRIPTION("Broadcom bnxt firmware manager");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/firmware/broadcom/tee_bnxt_fw.h b/include/linux/firmware/broadcom/tee_bnxt_fw.h
new file mode 100644
index 0000000..f24c82d
--- /dev/null
+++ b/include/linux/firmware/broadcom/tee_bnxt_fw.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: BSD-2-Clause */
+/*
+ * Copyright 2019 Broadcom.
+ */
+
+#ifndef _BROADCOM_TEE_BNXT_FW_H
+#define _BROADCOM_TEE_BNXT_FW_H
+
+#include <linux/types.h>
+
+int tee_bnxt_fw_load(void);
+int tee_bnxt_copy_coredump(void *buf, u32 offset, u32 size);
+
+#endif /* _BROADCOM_TEE_BNXT_FW_H */
--
1.9.1
Powered by blists - more mailing lists