| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191017122156.4d5262ac@cakuba.netronome.com>
Date: Thu, 17 Oct 2019 12:21:56 -0700
From: Jakub Kicinski <jakub.kicinski@...ronome.com>
To: Sheetal Tigadoli <sheetal.tigadoli@...adcom.com>
Cc: Rafał Miłecki <zajec5@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Michal Simek <michal.simek@...inx.com>,
Rajan Vaja <rajan.vaja@...inx.com>,
Scott Branden <scott.branden@...adcom.com>,
Ray Jui <ray.jui@...adcom.com>,
Vikram Prakash <vikram.prakash@...adcom.com>,
Jens Wiklander <jens.wiklander@...aro.org>,
Michael Chan <michael.chan@...adcom.com>,
"David S. Miller" <davem@...emloft.net>,
Vikas Gupta <vikas.gupta@...adcom.com>,
Vasundhara Volam <vasundhara-v.volam@...adcom.com>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
tee-dev@...ts.linaro.org, bcm-kernel-feedback-list@...adcom.com,
netdev@...r.kernel.org
Subject: Re: [PATCH V2 3/3] bnxt_en: Add support to collect crash dump via
ethtool
On Thu, 17 Oct 2019 17:31:22 +0530, Sheetal Tigadoli wrote:
> From: Vasundhara Volam <vasundhara-v.volam@...adcom.com>
>
> Driver supports 2 types of core dumps.
>
> 1. Live dump - Firmware dump when system is up and running.
> 2. Crash dump - Dump which is collected during firmware crash
> that can be retrieved after recovery.
> Crash dump is currently supported only on specific 58800 chips
> which can be retrieved using OP-TEE API only, as firmware cannot
> access this region directly.
>
> User needs to set the dump flag using following command before
> initiating the dump collection:
>
> $ ethtool -W|--set-dump eth0 N
>
> Where N is "0" for live dump and "1" for crash dump
>
> Command to collect the dump after setting the flag:
>
> $ ethtool -w eth0 data Filename
>
> Cc: Michael Chan <michael.chan@...adcom.com>
> Signed-off-by: Vasundhara Volam <vasundhara-v.volam@...adcom.com>
> Signed-off-by: Sheetal Tigadoli <sheetal.tigadoli@...adcom.com>
> ---
> drivers/net/ethernet/broadcom/bnxt/bnxt.h | 3 ++
> drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 36 +++++++++++++++++++++--
> drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 2 ++
> 3 files changed, 39 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> index 0943715..3e7d1fb 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
> @@ -1807,6 +1807,9 @@ struct bnxt {
>
> u8 num_leds;
> struct bnxt_led_info leds[BNXT_MAX_LED];
> + u16 dump_flag;
> +#define BNXT_DUMP_LIVE 0
> +#define BNXT_DUMP_CRASH 1
>
> struct bpf_prog *xdp_prog;
>
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> index 51c1404..1596221 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
> @@ -3311,6 +3311,23 @@ static int bnxt_get_coredump(struct bnxt *bp, void *buf, u32 *dump_len)
> return rc;
> }
>
> +static int bnxt_set_dump(struct net_device *dev, struct ethtool_dump *dump)
> +{
> + struct bnxt *bp = netdev_priv(dev);
> +
> +#ifndef CONFIG_TEE_BNXT_FW
> + return -EOPNOTSUPP;
> +#endif
if (!IS_ENABLED(...))
return x;
reads better IMHO
But also you seem to be breaking live dump for systems with
CONFIG_TEE_BNXT_FW=n
> + if (dump->flag > BNXT_DUMP_CRASH) {
> + netdev_err(dev, "Supports only Live(0) and Crash(1) dumps.\n");
more of an _info than _err, if at all
> + return -EINVAL;
> + }
> +
> + bp->dump_flag = dump->flag;
> + return 0;
> +}
> +
> static int bnxt_get_dump_flag(struct net_device *dev, struct ethtool_dump *dump)
> {
> struct bnxt *bp = netdev_priv(dev);
> @@ -3323,7 +3340,12 @@ static int bnxt_get_dump_flag(struct net_device *dev, struct ethtool_dump *dump)
> bp->ver_resp.hwrm_fw_bld_8b << 8 |
> bp->ver_resp.hwrm_fw_rsvd_8b;
>
> - return bnxt_get_coredump(bp, NULL, &dump->len);
> + dump->flag = bp->dump_flag;
> + if (bp->dump_flag == BNXT_DUMP_CRASH)
> + dump->len = BNXT_CRASH_DUMP_LEN;
> + else
> + bnxt_get_coredump(bp, NULL, &dump->len);
> + return 0;
> }
>
> static int bnxt_get_dump_data(struct net_device *dev, struct ethtool_dump *dump,
> @@ -3336,7 +3358,16 @@ static int bnxt_get_dump_data(struct net_device *dev, struct ethtool_dump *dump,
>
> memset(buf, 0, dump->len);
>
> - return bnxt_get_coredump(bp, buf, &dump->len);
> + dump->flag = bp->dump_flag;
> + if (dump->flag == BNXT_DUMP_CRASH) {
> +#ifdef CONFIG_TEE_BNXT_FW
> + return tee_bnxt_copy_coredump(buf, 0, dump->len);
> +#endif
> + } else {
> + return bnxt_get_coredump(bp, buf, &dump->len);
> + }
> +
> + return 0;
> }
>
> void bnxt_ethtool_init(struct bnxt *bp)
> @@ -3446,6 +3477,7 @@ void bnxt_ethtool_free(struct bnxt *bp)
> .set_phys_id = bnxt_set_phys_id,
> .self_test = bnxt_self_test,
> .reset = bnxt_reset,
> + .set_dump = bnxt_set_dump,
> .get_dump_flag = bnxt_get_dump_flag,
> .get_dump_data = bnxt_get_dump_data,
> };
> diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
> index b5b65b3..01de7e7 100644
> --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
> +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h
> @@ -59,6 +59,8 @@ struct hwrm_dbg_cmn_output {
> #define HWRM_DBG_CMN_FLAGS_MORE 1
> };
>
> +#define BNXT_CRASH_DUMP_LEN (8 << 20)
> +
> #define BNXT_LED_DFLT_ENA \
> (PORT_LED_CFG_REQ_ENABLES_LED0_ID | \
> PORT_LED_CFG_REQ_ENABLES_LED0_STATE | \
Powered by blists - more mailing lists