linux-kernel - Re: [PATCH 0/4] [RFC] Migrate Pages in lieu of discard

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAHbLzkp1cDFizWOvknHUT0N9Y6AtQM9Z_Af9mQpiQ4a=PRexkw@mail.gmail.com>
Date:   Fri, 18 Oct 2019 14:44:08 -0700
From:   Yang Shi <shy828301@...il.com>
To:     Shakeel Butt <shakeelb@...gle.com>
Cc:     Dave Hansen <dave.hansen@...el.com>,
        Dave Hansen <dave.hansen@...ux.intel.com>,
        LKML <linux-kernel@...r.kernel.org>,
        Linux MM <linux-mm@...ck.org>,
        Dan Williams <dan.j.williams@...el.com>,
        Jonathan Adams <jwadams@...gle.com>,
        "Chen, Tim C" <tim.c.chen@...el.com>
Subject: Re: [PATCH 0/4] [RFC] Migrate Pages in lieu of discard

On Thu, Oct 17, 2019 at 3:58 PM Shakeel Butt <shakeelb@...gle.com> wrote:
>
> On Thu, Oct 17, 2019 at 10:20 AM Yang Shi <shy828301@...il.com> wrote:
> >
> > On Thu, Oct 17, 2019 at 7:26 AM Dave Hansen <dave.hansen@...el.com> wrote:
> > >
> > > On 10/16/19 8:45 PM, Shakeel Butt wrote:
> > > > On Wed, Oct 16, 2019 at 3:49 PM Dave Hansen <dave.hansen@...ux.intel.com> wrote:
> > > >> This set implements a solution to these problems.  At the end of the
> > > >> reclaim process in shrink_page_list() just before the last page
> > > >> refcount is dropped, the page is migrated to persistent memory instead
> > > >> of being dropped.
> > > ..> The memory cgroup part of the story is missing here. Since PMEM is
> > > > treated as slow DRAM, shouldn't its usage be accounted to the
> > > > corresponding memcg's memory/memsw counters and the migration should
> > > > not happen for memcg limit reclaim? Otherwise some jobs can hog the
> > > > whole PMEM.
> > >
> > > My expectation (and I haven't confirmed this) is that the any memory use
> > > is accounted to the owning cgroup, whether it is DRAM or PMEM.  memcg
> > > limit reclaim and global reclaim both end up doing migrations and
> > > neither should have a net effect on the counters.
> >
> > Yes, your expectation is correct. As long as PMEM is a NUMA node, it
> > is treated as regular memory by memcg. But, I don't think memcg limit
> > reclaim should do migration since limit reclaim is used to reduce
> > memory usage, but migration doesn't reduce usage, it just moves memory
> > from one node to the other.
> >
> > In my implementation, I just skip migration for memcg limit reclaim,
> > please see: https://lore.kernel.org/linux-mm/1560468577-101178-7-git-send-email-yang.shi@linux.alibaba.com/
> >
> > >
> > > There is certainly a problem here because DRAM is a more valuable
> > > resource vs. PMEM, and memcg accounts for them as if they were equally
> > > valuable.  I really want to see memcg account for this cost discrepancy
> > > at some point, but I'm not quite sure what form it would take.  Any
> > > feedback from you heavy memcg users out there would be much appreciated.
> >
> > We did have some demands to control the ratio between DRAM and PMEM as
> > I mentioned in LSF/MM. Mel Gorman did suggest make memcg account DRAM
> > and PMEM respectively or something similar.
> >
>
> Can you please describe how you plan to use this ratio? Are
> applications supposed to use this ratio or the admins will be
> adjusting this ratio? Also should it dynamically updated based on the
> workload i.e. as the working set or hot pages grows we want more DRAM
> and as cold pages grows we want more PMEM? Basically I am trying to
> see if we have something like smart auto-numa balancing to fulfill
> your use-case.

We thought it should be controlled by admins and transparent to the
end users. The ratio is fixed, but the memory could be moved between
DRAM and PMEM dynamically as long as it doesn't exceed the ratio so
that we could keep warmer data in DRAM and colder data in PMEM.

I talked this about in LSF/MM, please check this out:
https://lwn.net/Articles/787418/

>
> > >
> > > > Also what happens when PMEM is full? Can the memory migrated to PMEM
> > > > be reclaimed (or discarded)?
> > >
> > > Yep.  The "migration path" can be as long as you want, but once the data
> > > hits a "terminal node" it will stop getting migrated and normal discard
> > > at the end of reclaim happens.
> >
> > I recalled I had a hallway conversation with Keith about this in
> > LSF/MM. We all agree there should be not a cycle. But, IMHO, I don't
> > think exporting migration path to userspace (or letting user to define
> > migration path) and having multiple migration stops are good ideas in
> > general.
> >
> > >