lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAAhSdy2Ln1H4hSbjSt30pZQpHRiP5G2rJffDXFDS6TbvBnM-vw@mail.gmail.com>
Date:   Fri, 18 Oct 2019 08:27:36 +0530
From:   Anup Patel <anup@...infault.org>
To:     Christoph Hellwig <hch@....de>
Cc:     Palmer Dabbelt <palmer@...ive.com>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Damien Le Moal <damien.lemoal@....com>,
        linux-riscv <linux-riscv@...ts.infradead.org>,
        "linux-kernel@...r.kernel.org List" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 08/15] riscv: add support for MMIO access to the timer registers

On Thu, Oct 17, 2019 at 11:08 PM Christoph Hellwig <hch@....de> wrote:
>
> When running in M-mode we can't use the SBI to set the timer, and
> don't have access to the time CSR as that usually is emulated by
> M-mode.  Instead provide code that directly accesses the MMIO for
> the timer.
>
> Signed-off-by: Christoph Hellwig <hch@....de>
> ---
>  arch/riscv/include/asm/sbi.h      |  3 ++-
>  arch/riscv/include/asm/timex.h    | 19 +++++++++++++++++--
>  drivers/clocksource/timer-riscv.c | 21 +++++++++++++++++----
>  3 files changed, 36 insertions(+), 7 deletions(-)
>
> diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
> index 0cb74eccc73f..a4774bafe033 100644
> --- a/arch/riscv/include/asm/sbi.h
> +++ b/arch/riscv/include/asm/sbi.h
> @@ -95,7 +95,8 @@ static inline void sbi_remote_sfence_vma_asid(const unsigned long *hart_mask,
>         SBI_CALL_4(SBI_REMOTE_SFENCE_VMA_ASID, hart_mask, start, size, asid);
>  }
>  #else /* CONFIG_RISCV_SBI */
> -/* stub to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
> +/* stubs to for code is only reachable under IS_ENABLED(CONFIG_RISCV_SBI): */
> +void sbi_set_timer(uint64_t stime_value);
>  void sbi_remote_fence_i(const unsigned long *hart_mask);
>  #endif /* CONFIG_RISCV_SBI */
>  #endif /* _ASM_RISCV_SBI_H */
> diff --git a/arch/riscv/include/asm/timex.h b/arch/riscv/include/asm/timex.h
> index c7ef131b9e4c..e17837d61667 100644
> --- a/arch/riscv/include/asm/timex.h
> +++ b/arch/riscv/include/asm/timex.h
> @@ -7,12 +7,25 @@
>  #define _ASM_RISCV_TIMEX_H
>
>  #include <asm/csr.h>
> +#include <asm/io.h>
>
>  typedef unsigned long cycles_t;
>
> +extern u64 __iomem *riscv_time_val;
> +extern u64 __iomem *riscv_time_cmp;
> +
> +#ifdef CONFIG_64BIT
> +#define mmio_get_cycles()      readq_relaxed(riscv_time_val)
> +#else
> +#define mmio_get_cycles()      readl_relaxed(riscv_time_val)
> +#define mmio_get_cycles_hi()   readl_relaxed(((u32 *)riscv_time_val) + 1)
> +#endif
> +
>  static inline cycles_t get_cycles(void)
>  {
> -       return csr_read(CSR_TIME);
> +       if (IS_ENABLED(CONFIG_RISCV_SBI))
> +               return csr_read(CSR_TIME);
> +       return mmio_get_cycles();
>  }
>  #define get_cycles get_cycles
>
> @@ -24,7 +37,9 @@ static inline u64 get_cycles64(void)
>  #else /* CONFIG_64BIT */
>  static inline u32 get_cycles_hi(void)
>  {
> -       return csr_read(CSR_TIMEH);
> +       if (IS_ENABLED(CONFIG_RISCV_SBI))
> +               return csr_read(CSR_TIMEH);
> +       return mmio_get_cycles_hi();
>  }
>
>  static inline u64 get_cycles64(void)
> diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
> index 5d2fdc3e28a9..2b9fbc4ebe49 100644
> --- a/drivers/clocksource/timer-riscv.c
> +++ b/drivers/clocksource/timer-riscv.c
> @@ -3,9 +3,9 @@
>   * Copyright (C) 2012 Regents of the University of California
>   * Copyright (C) 2017 SiFive
>   *
> - * All RISC-V systems have a timer attached to every hart.  These timers can be
> - * read from the "time" and "timeh" CSRs, and can use the SBI to setup
> - * events.
> + * All RISC-V systems have a timer attached to every hart.  These timers can
> + * either be read from the "time" and "timeh" CSRs, and can use the SBI to
> + * setup events, or directly accessed using MMIO registers.
>   */
>  #include <linux/clocksource.h>
>  #include <linux/clockchips.h>
> @@ -13,14 +13,27 @@
>  #include <linux/delay.h>
>  #include <linux/irq.h>
>  #include <linux/sched_clock.h>
> +#include <linux/io-64-nonatomic-lo-hi.h>
>  #include <asm/smp.h>
>  #include <asm/sbi.h>
>
> +u64 __iomem *riscv_time_cmp;
> +u64 __iomem *riscv_time_val;
> +
> +static inline void mmio_set_timer(u64 val)
> +{
> +       writeq_relaxed(val,
> +               riscv_time_cmp + cpuid_to_hartid_map(smp_processor_id()));
> +}
> +
>  static int riscv_clock_next_event(unsigned long delta,
>                 struct clock_event_device *ce)
>  {
>         csr_set(CSR_XIE, XIE_XTIE);
> -       sbi_set_timer(get_cycles64() + delta);
> +       if (IS_ENABLED(CONFIG_RISCV_SBI))
> +               sbi_set_timer(get_cycles64() + delta);
> +       else
> +               mmio_set_timer(get_cycles64() + delta);
>         return 0;
>  }
>
> --
> 2.20.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv

LGTM.

Reviewed-by: Anup Patel <anup@...infault.org>

Regards,
Anup

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ