Message-ID: <20191018101924.GA25540@bogus>
Date:   Fri, 18 Oct 2019 11:19:24 +0100
From:   Sudeep Holla <sudeep.holla@....com>
To:     Viresh Kumar <viresh.kumar@...aro.org>
Cc:     "Rafael J. Wysocki" <rafael@...nel.org>,
        "Rafael J . Wysocki" <rjw@...ysocki.net>,
        Linux PM <linux-pm@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] cpufreq: flush any pending policy update work scheduled
 before freeing

On Fri, Oct 18, 2019 at 11:32:47AM +0530, Viresh Kumar wrote:
> On 18-10-19, 06:55, Sudeep Holla wrote:
> > On Thu, Oct 17, 2019 at 11:26:54PM +0200, Rafael J. Wysocki wrote:
> > > On Thu, Oct 17, 2019 at 9:36 PM Rafael J. Wysocki <rafael@...nel.org> wrote:
> > > >
> > > > On Thu, Oct 17, 2019 at 6:35 PM Sudeep Holla <sudeep.holla@....com> wrote:
> > > > >
> > > > > dev_pm_qos_remove_request ends calling {max,min}_freq_req QoS notifiers
> > > > > which schedule policy update work. It may end up racing with the freeing
> > > > > the policy and unregistering the driver.
> > > > >
> > > > > One possible race is as below where the cpufreq_driver is unregistered
> > > > > but the scheduled work gets executed at later stage when cpufreq_driver
> > > > > is NULL(i.e. after freeing the policy and driver)
> > > > >
> > > > > Unable to handle kernel NULL pointer dereference at virtual address 0000001c
> > > > > pgd = (ptrval)
> > > > > [0000001c] *pgd=80000080204003, *pmd=00000000
> > > > > Internal error: Oops: 206 [#1] SMP THUMB2
> > > > > Modules linked in:
> > > > > CPU: 0 PID: 34 Comm: kworker/0:1 Not tainted 5.4.0-rc3-00006-g67f5a8081a4b #86
> > > > > Hardware name: ARM-Versatile Express
> > > > > Workqueue: events handle_update
> > > > > PC is at cpufreq_set_policy+0x58/0x228
> > > > > LR is at dev_pm_qos_read_value+0x77/0xac
> > > > > Control: 70c5387d  Table: 80203000  DAC: fffffffd
> > > > > Process kworker/0:1 (pid: 34, stack limit = 0x(ptrval))
> > > > >         (cpufreq_set_policy) from (refresh_frequency_limits.part.24+0x37/0x48)
> > > > >         (refresh_frequency_limits.part.24) from (handle_update+0x2f/0x38)
> > > > >         (handle_update) from (process_one_work+0x16d/0x3cc)
> > > > >         (process_one_work) from (worker_thread+0xff/0x414)
> > > > >         (worker_thread) from (kthread+0xff/0x100)
> > > > >         (kthread) from (ret_from_fork+0x11/0x28)
> > > > >
> > > > > Cc: "Rafael J. Wysocki" <rjw@...ysocki.net>
> > > > > Cc: Viresh Kumar <viresh.kumar@...aro.org>
> > > > > Signed-off-by: Sudeep Holla <sudeep.holla@....com>
> > > > > ---
> > > > >  drivers/cpufreq/cpufreq.c | 3 +++
> > > > >  1 file changed, 3 insertions(+)
> > > > >
> > > > > Hi Rafael, Viresh,
> > > > >
> > > > > This fixed the boot issue I reported[1] on TC2 with bL switcher enabled.
> > > > > I have based this patch on -rc3 and not on top of your patches. This
> > > > > only fixes the boot issue but I hit the other crashes while continuously
> > > > > switching on and off the bL switcher that register/unregister the driver
> > > > > Your patch series fixes them. I can based this on top of those if you
> > > > > prefer.
> > > > >
> > > > > Regards,
> > > > > Sudeep
> > > > >
> > > > > [1] https://lore.kernel.org/linux-pm/20191015155735.GA29105@bogus/
> > > > >
> > > > > diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
> > > > > index c52d6fa32aac..b703c29a84be 100644
> > > > > --- a/drivers/cpufreq/cpufreq.c
> > > > > +++ b/drivers/cpufreq/cpufreq.c
> > > > > @@ -1278,6 +1278,9 @@ static void cpufreq_policy_free(struct cpufreq_policy *policy)
> > > > >         }
> > > > >
> > > > >         dev_pm_qos_remove_request(policy->min_freq_req);
> > > > > +       /* flush the pending policy->update work before freeing the policy */
> > > > > +       if (work_pending(&policy->update))
> > > >
> > > > Isn't this racy?
> > > >
> > > > It still may be running if the pending bit is clear and we still need
> > > > to wait for it then, don't we?
> > > >
> > > > Why don't you do an unconditional flush_work() here?
> > > 
> > > You may as well do a cancel_work_sync() here, because whether or not
> > > the last update of the policy happens before it goes away is a matter
> > > of timing in any case
> > 
> > In fact that's the first thing I tried to fix the issue I was seeing.
> > But I then thought it would be better to complete the update as the PM
> > QoS were getting updated back to DEFAULT values for the device. Even
> > this works.
> > 
> > What is your preference ? flush_work or cancel_work_sync ? I will
> > update accordingly. I may need to do some more testing with
> > cancel_work_sync as I just checked that quickly to confirm the race.
> 
> As I said in the other email, this work didn't come as a result of
> removal of the qos request from cpufreq core and so must have come
> from other thermal or similar events.

I don't think so. For sure not because of any thermal events. I didn't
have log handy and hence had to wait till I was next to hardware.

This is log:
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request max before
 cpufreq: cpufreq_notifier_max: schedule_work(&policy->update)
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request max after
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request min before
 cpufreq: cpufreq_notifier_min: schedule_work(&policy->update)
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request min after
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request max before
 cpufreq: cpufreq_notifier_max: schedule_work(&policy->update)
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request max after
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request min before
 cpufreq: cpufreq_notifier_min: schedule_work(&policy->update)
 cpufreq: cpufreq_policy_free: dev_pm_qos_remove_request min after

So if I move the call above, it still crashes as the work is getting
scheduled later.

--
Regards,
Sudeep

Powered by blists - more mailing lists