[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191018111126.5246-2-Eugeniy.Paltsev@synopsys.com>
Date: Fri, 18 Oct 2019 14:11:25 +0300
From: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
To: linux-snps-arc@...ts.infradead.org,
Vineet Gupta <Vineet.Gupta1@...opsys.com>
Cc: linux-kernel@...r.kernel.org,
Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
Subject: [PATCH 1/2] ARC: [plat-hsdk]: Enable on-board SPI NOR flash IC
HSDK board has sst26wf016b SPI NOR flash IC installed, enable it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>
---
arch/arc/boot/dts/hsdk.dts | 8 ++++++++
arch/arc/configs/hsdk_defconfig | 2 ++
2 files changed, 10 insertions(+)
diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
index bfc7f5f5d6f2..9bea5daadd23 100644
--- a/arch/arc/boot/dts/hsdk.dts
+++ b/arch/arc/boot/dts/hsdk.dts
@@ -264,6 +264,14 @@
clocks = <&input_clk>;
cs-gpios = <&creg_gpio 0 GPIO_ACTIVE_LOW>,
<&creg_gpio 1 GPIO_ACTIVE_LOW>;
+
+ spi-flash@0 {
+ compatible = "sst26wf016b", "jedec,spi-nor";
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ spi-max-frequency = <4000000>;
+ };
};
creg_gpio: gpio@...0 {
diff --git a/arch/arc/configs/hsdk_defconfig b/arch/arc/configs/hsdk_defconfig
index 9b9a74444ce2..22fc70396a3b 100644
--- a/arch/arc/configs/hsdk_defconfig
+++ b/arch/arc/configs/hsdk_defconfig
@@ -32,6 +32,8 @@ CONFIG_INET=y
CONFIG_DEVTMPFS=y
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_SPI_NOR=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_NETDEVICES=y
--
2.21.0
Powered by blists - more mailing lists