linux-kernel - [PATCH v14 07/19] dt: bindings: lp55xx: Be consistent in the document with LED acronym

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191018122521.6757-8-dmurphy@ti.com>
Date:   Fri, 18 Oct 2019 07:25:09 -0500
From:   Dan Murphy <dmurphy@...com>
To:     <jacek.anaszewski@...il.com>, <pavel@....cz>
CC:     <linux-leds@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Dan Murphy <dmurphy@...com>
Subject: [PATCH v14 07/19] dt: bindings: lp55xx: Be consistent in the document with LED acronym

Update the document to be consistent in case when using "LED".
This acronym should be capital throughout the document.

Signed-off-by: Dan Murphy <dmurphy@...com>
---
 Documentation/devicetree/bindings/leds/leds-lp55xx.txt | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
index 1b66a413fb9d..bfe2805c5534 100644
--- a/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.txt
@@ -1,4 +1,4 @@
-Binding for TI/National Semiconductor LP55xx Led Drivers
+Binding for TI/National Semiconductor LP55xx LED Drivers
 
 Required properties:
 - compatible: one of
@@ -12,8 +12,8 @@ Required properties:
 - clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
 
 Each child has own specific current settings
-- led-cur: Current setting at each led channel (mA x10, 0 if led is not connected)
-- max-cur: Maximun current at each led channel.
+- led-cur: Current setting at each LED channel (mA x10, 0 if LED is not connected)
+- max-cur: Maximun current at each LED channel.
 
 Optional properties:
 - enable-gpio: GPIO attached to the chip's enable pin
-- 
2.22.0.214.g8dca754b1e