| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191018154201.1276638-11-arnd@arndb.de>
Date: Fri, 18 Oct 2019 17:41:26 +0200
From: Arnd Bergmann <arnd@...db.de>
To: Daniel Mack <daniel@...que.org>,
Haojian Zhuang <haojian.zhuang@...il.com>,
Robert Jarzmik <robert.jarzmik@...e.fr>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Arnd Bergmann <arnd@...db.de>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>,
Brian Norris <computersforpeace@...il.com>,
Marek Vasut <marek.vasut@...il.com>,
Vignesh Raghavendra <vigneshr@...com>,
linux-mtd@...ts.infradead.org
Subject: [PATCH 11/46] ARM: pxa: cmx270: use platform device for nand
The driver traditionally hardcodes the MMIO register address and
the GPIO numbers from data defined in platform header files.
To make it indepdendent of that, use a memory resource for the
registers, and a gpio lookup table to replace the gpio numbers.
Cc: Miquel Raynal <miquel.raynal@...tlin.com>
Cc: Richard Weinberger <richard@....at>
Cc: David Woodhouse <dwmw2@...radead.org>
Cc: Brian Norris <computersforpeace@...il.com>
Cc: Marek Vasut <marek.vasut@...il.com>
Cc: Vignesh Raghavendra <vigneshr@...com>
Cc: linux-mtd@...ts.infradead.org
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
arch/arm/mach-pxa/cm-x270.c | 25 +++++++++
drivers/mtd/nand/raw/cmx270_nand.c | 88 +++++++++++-------------------
2 files changed, 56 insertions(+), 57 deletions(-)
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 9baad11314f2..6d80400d8887 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -40,6 +40,10 @@
#define GPIO19_WLAN_STRAP (19)
#define GPIO102_WLAN_RST (102)
+/* NAND GPIOS */
+#define GPIO_NAND_CS (11)
+#define GPIO_NAND_RB (89)
+
static unsigned long cmx270_pin_config[] = {
/* AC'97 */
GPIO28_AC97_BITCLK,
@@ -403,6 +407,26 @@ static void __init cmx270_init_spi(void)
static inline void cmx270_init_spi(void) {}
#endif
+static struct gpiod_lookup_table cmx270_nand_gpio_table = {
+ .dev_id = "cmx270-nand",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_CS, "cs", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NAND_RB, "rb", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct resource cmx270_nand_resources[] __initdata = {
+ DEFINE_RES_MEM(PXA_CS1_PHYS, 12),
+};
+
+static void __init cmx270_init_nand(void)
+{
+ platform_device_register_simple("cmx270-nand", -1,
+ cmx270_nand_resources, 1);
+ gpiod_add_lookup_table(&cmx270_nand_gpio_table);
+}
+
void __init cmx270_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
@@ -416,4 +440,5 @@ void __init cmx270_init(void)
cmx270_init_ohci();
cmx270_init_2700G();
cmx270_init_spi();
+ cmx270_init_nand();
}
diff --git a/drivers/mtd/nand/raw/cmx270_nand.c b/drivers/mtd/nand/raw/cmx270_nand.c
index 7af3d0bdcdb8..31cb20858c46 100644
--- a/drivers/mtd/nand/raw/cmx270_nand.c
+++ b/drivers/mtd/nand/raw/cmx270_nand.c
@@ -15,18 +15,17 @@
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/soc/pxa/cpu.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
-#include <mach/addr-map.h>
-
-#define GPIO_NAND_CS (11)
-#define GPIO_NAND_RB (89)
+static struct gpio_desc *gpiod_nand_cs;
+static struct gpio_desc *gpiod_nand_rb;
/* MTD structure for CM-X270 board */
static struct mtd_info *cmx270_nand_mtd;
@@ -70,14 +69,14 @@ static void cmx270_read_buf(struct nand_chip *this, u_char *buf, int len)
static inline void nand_cs_on(void)
{
- gpio_set_value(GPIO_NAND_CS, 0);
+ gpiod_set_value(gpiod_nand_cs, 0);
}
static void nand_cs_off(void)
{
dsb();
- gpio_set_value(GPIO_NAND_CS, 1);
+ gpiod_set_value(gpiod_nand_cs, 1);
}
/*
@@ -120,48 +119,41 @@ static int cmx270_device_ready(struct nand_chip *this)
{
dsb();
- return (gpio_get_value(GPIO_NAND_RB));
+ return (gpiod_get_value(gpiod_nand_rb));
}
/*
* Main initialization routine
*/
-static int __init cmx270_init(void)
+static int cmx270_probe(struct platform_device *pdev)
{
struct nand_chip *this;
+ struct device *dev = &pdev->dev;
int ret;
- if (!(machine_is_armcore() && cpu_is_pxa27x()))
- return -ENODEV;
-
- ret = gpio_request(GPIO_NAND_CS, "NAND CS");
+ gpiod_nand_cs = devm_gpiod_get(dev, "cs", GPIOD_OUT_HIGH);
+ ret = PTR_ERR_OR_ZERO(gpiod_nand_cs);
if (ret) {
pr_warn("CM-X270: failed to request NAND CS gpio\n");
return ret;
}
- gpio_direction_output(GPIO_NAND_CS, 1);
-
- ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
+ gpiod_nand_rb = devm_gpiod_get(dev, "rb", GPIOD_IN);
+ ret = PTR_ERR_OR_ZERO(gpiod_nand_rb);
if (ret) {
pr_warn("CM-X270: failed to request NAND R/B gpio\n");
- goto err_gpio_request;
+ return ret;
}
- gpio_direction_input(GPIO_NAND_RB);
-
/* Allocate memory for MTD device structure and private data */
- this = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
- if (!this) {
- ret = -ENOMEM;
- goto err_kzalloc;
- }
+ this = devm_kzalloc(dev, sizeof(struct nand_chip), GFP_KERNEL);
+ if (!this)
+ return -ENOMEM;
- cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
+ cmx270_nand_io = devm_platform_ioremap_resource(pdev, 0);
if (!cmx270_nand_io) {
pr_debug("Unable to ioremap NAND device\n");
- ret = -EINVAL;
- goto err_ioremap;
+ return -EINVAL;
}
cmx270_nand_mtd = nand_to_mtd(this);
@@ -189,48 +181,30 @@ static int __init cmx270_init(void)
ret = nand_scan(this, 1);
if (ret) {
pr_notice("No NAND device\n");
- goto err_scan;
+ return ret;
}
/* Register the partitions */
- ret = mtd_device_register(cmx270_nand_mtd, partition_info,
- NUM_PARTITIONS);
- if (ret)
- goto err_scan;
-
- /* Return happy */
- return 0;
-
-err_scan:
- iounmap(cmx270_nand_io);
-err_ioremap:
- kfree(this);
-err_kzalloc:
- gpio_free(GPIO_NAND_RB);
-err_gpio_request:
- gpio_free(GPIO_NAND_CS);
-
- return ret;
-
+ return mtd_device_register(cmx270_nand_mtd, partition_info,
+ NUM_PARTITIONS);
}
-module_init(cmx270_init);
/*
* Clean up routine
*/
-static void __exit cmx270_cleanup(void)
+static int cmx270_remove(struct platform_device *pdev)
{
- /* Release resources, unregister device */
nand_release(mtd_to_nand(cmx270_nand_mtd));
- gpio_free(GPIO_NAND_RB);
- gpio_free(GPIO_NAND_CS);
-
- iounmap(cmx270_nand_io);
-
- kfree(mtd_to_nand(cmx270_nand_mtd));
+ return 0;
}
-module_exit(cmx270_cleanup);
+
+static struct platform_driver cmx270_nand_driver = {
+ .driver.name = "cmx270-nand",
+ .probe = cmx270_probe,
+ .remove = cmx270_remove,
+};
+module_platform_driver(cmx270_nand_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mike Rapoport <mike@...pulab.co.il>");
--
2.20.0
Powered by blists - more mailing lists