| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191021174507.72f2b777@archlinux>
Date: Mon, 21 Oct 2019 17:45:07 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Gwendal Grignou <gwendal@...omium.org>
Cc: briannorris@...omium.org, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, lee.jones@...aro.org, bleung@...omium.org,
enric.balletbo@...labora.com, dianders@...omium.org,
groeck@...omium.org, fabien.lahoudere@...labora.com,
linux-kernel@...r.kernel.org, linux-iio@...r.kernel.org
Subject: Re: [PATCH v2 18/18] iio: cros_ec: Use Hertz as unit for sampling
frequency
On Sun, 20 Oct 2019 22:54:03 -0700
Gwendal Grignou <gwendal@...omium.org> wrote:
> To be compliant with other sensors, set and get sensor sampling
> frequency in Hz, not mHz.
>
> Fixes: ae7b02ad2f32 ("iio: common: cros_ec_sensors: Expose
> cros_ec_sensors frequency range via iio sysfs")
>
> Signed-off-by: Gwendal Grignou <gwendal@...omium.org>
Do we need to look at back porting this?
Acked-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
Not sure which path this set will take in, hence I've given
acks for various patches incase it's not via me.
Whole set is in general good to have, but I do worry a bit about
people noticing ABI breakage. *crosses fingers*
Jonathan
> ---
> No changes in v2.
>
> .../cros_ec_sensors/cros_ec_sensors_core.c | 32 +++++++++++--------
> .../linux/iio/common/cros_ec_sensors_core.h | 6 ++--
> 2 files changed, 22 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index f50e239f9a1e9..76dc8cad1b4b5 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -256,6 +256,7 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
> struct cros_ec_dev *ec = sensor_hub->ec;
> struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
> u32 ver_mask;
> + int frequencies[ARRAY_SIZE(state->frequencies) / 2] = { 0 };
> int ret, i;
>
> platform_set_drvdata(pdev, indio_dev);
> @@ -304,20 +305,22 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
> state->calib[i].scale = MOTION_SENSE_DEFAULT_SCALE;
>
> /* 0 is a correct value used to stop the device */
> - state->frequencies[0] = 0;
> if (state->msg->version < 3) {
> get_default_min_max_freq(state->resp->info.type,
> - &state->frequencies[1],
> - &state->frequencies[2],
> + &frequencies[1],
> + &frequencies[2],
> &state->fifo_max_event_count);
> } else {
> - state->frequencies[1] =
> - state->resp->info_3.min_frequency;
> - state->frequencies[2] =
> - state->resp->info_3.max_frequency;
> + frequencies[1] = state->resp->info_3.min_frequency;
> + frequencies[2] = state->resp->info_3.max_frequency;
> state->fifo_max_event_count =
> state->resp->info_3.fifo_max_event_count;
> }
> + for (i = 0; i < ARRAY_SIZE(frequencies); i++) {
> + state->frequencies[2 * i] = frequencies[i] / 1000;
> + state->frequencies[2 * i + 1] =
> + (frequencies[i] % 1000) * 1000;
> + }
>
> ret = devm_iio_triggered_buffer_setup(
> dev, indio_dev, NULL,
> @@ -707,7 +710,7 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
> struct iio_chan_spec const *chan,
> int *val, int *val2, long mask)
> {
> - int ret;
> + int ret, frequency;
>
> switch (mask) {
> case IIO_CHAN_INFO_SAMP_FREQ:
> @@ -719,8 +722,10 @@ int cros_ec_sensors_core_read(struct cros_ec_sensors_core_state *st,
> if (ret)
> break;
>
> - *val = st->resp->sensor_odr.ret;
> - ret = IIO_VAL_INT;
> + frequency = st->resp->sensor_odr.ret;
> + *val = frequency / 1000;
> + *val2 = (frequency % 1000) * 1000;
> + ret = IIO_VAL_INT_PLUS_MICRO;
> break;
> default:
> ret = -EINVAL;
> @@ -755,7 +760,7 @@ int cros_ec_sensors_core_read_avail(struct iio_dev *indio_dev,
> case IIO_CHAN_INFO_SAMP_FREQ:
> *length = ARRAY_SIZE(state->frequencies);
> *vals = (const int *)&state->frequencies;
> - *type = IIO_VAL_INT;
> + *type = IIO_VAL_INT_PLUS_MICRO;
> return IIO_AVAIL_LIST;
> }
>
> @@ -777,12 +782,13 @@ int cros_ec_sensors_core_write(struct cros_ec_sensors_core_state *st,
> struct iio_chan_spec const *chan,
> int val, int val2, long mask)
> {
> - int ret;
> + int ret, frequency;
>
> switch (mask) {
> case IIO_CHAN_INFO_SAMP_FREQ:
> + frequency = val * 1000 + val2 / 1000;
> st->param.cmd = MOTIONSENSE_CMD_SENSOR_ODR;
> - st->param.sensor_odr.data = val;
> + st->param.sensor_odr.data = frequency;
>
> /* Always roundup, so caller gets at least what it asks for. */
> st->param.sensor_odr.roundup = 1;
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index 4df3abd151fbf..256447b136296 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -52,6 +52,8 @@ typedef irqreturn_t (*cros_ec_sensors_capture_t)(int irq, void *p);
> * is always 8-byte aligned.
> * @read_ec_sensors_data: function used for accessing sensors values
> * @fifo_max_event_count: Size of the EC sensor FIFO
> + * @frequencies: Table of known available frequencies:
> + * 0, Min and Max in mHz.
> */
> struct cros_ec_sensors_core_state {
> struct cros_ec_device *ec;
> @@ -75,9 +77,7 @@ struct cros_ec_sensors_core_state {
> unsigned long scan_mask, s16 *data);
>
> u32 fifo_max_event_count;
> -
> - /* Table of known available frequencies : 0, Min and Max in mHz */
> - int frequencies[3];
> + int frequencies[6];
> };
>
> int cros_ec_sensors_read_lpc(struct iio_dev *indio_dev, unsigned long scan_mask,
Powered by blists - more mailing lists