| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191021080048.47189-1-biwen.li@nxp.com>
Date: Mon, 21 Oct 2019 16:00:47 +0800
From: Biwen Li <biwen.li@....com>
To: peda@...ntia.se, leoyang.li@....com, robh+dt@...nel.org,
mark.rutland@....com
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, Biwen Li <biwen.li@....com>
Subject: [v4,1/2] dt-bindings: i2c: support property idle-state
This supports property idle-state
Signed-off-by: Biwen Li <biwen.li@....com>
---
Change in v4:
- none
Change in v3:
- update subject and description
- add some information for property idle-state
Change in v2:
- update subject and description
- add property idle-state
Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
index 30ac6a60f041..7abda506b828 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
@@ -25,6 +25,8 @@ Required Properties:
Optional Properties:
- reset-gpios: Reference to the GPIO connected to the reset input.
+ - idle-state: if present, overrides i2c-mux-idle-disconnect,
+ Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
- i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
children in idle state. This is necessary for example, if there are several
multiplexers on the bus and the devices behind them use same I2C addresses.
--
2.17.1
Powered by blists - more mailing lists