lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191021135813.13571-3-ckeepax@opensource.cirrus.com>
Date:   Mon, 21 Oct 2019 14:58:13 +0100
From:   Charles Keepax <ckeepax@...nsource.cirrus.com>
To:     <lee.jones@...aro.org>
CC:     <robh+dt@...nel.org>, <mark.rutland@....com>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <patches@...nsource.cirrus.com>
Subject: [PATCH RESEND v4 3/3] mfd: madera: Add support for requesting the supply clocks

Add the ability to get the clock for each clock input pin of the chip
and enable MCLK2 since that is expected to be a permanently enabled
32kHz clock.

Signed-off-by: Charles Keepax <ckeepax@...nsource.cirrus.com>
---
 drivers/mfd/madera-core.c       | 27 ++++++++++++++++++++++++++-
 include/linux/mfd/madera/core.h | 11 +++++++++++
 2 files changed, 37 insertions(+), 1 deletion(-)

diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c
index 29540cbf75934..a8cfadc1fc01e 100644
--- a/drivers/mfd/madera-core.c
+++ b/drivers/mfd/madera-core.c
@@ -450,6 +450,21 @@ int madera_dev_init(struct madera *madera)
 		       sizeof(madera->pdata));
 	}
 
+	madera->mclk[MADERA_MCLK1].id = "mclk1";
+	madera->mclk[MADERA_MCLK2].id = "mclk2";
+	madera->mclk[MADERA_MCLK3].id = "mclk3";
+
+	ret = devm_clk_bulk_get_optional(madera->dev, ARRAY_SIZE(madera->mclk),
+					 madera->mclk);
+	if (ret) {
+		dev_err(madera->dev, "Failed to get clocks: %d\n", ret);
+		return ret;
+	}
+
+	/* Not using devm_clk_get to prevent breakage of existing DTs */
+	if (!madera->mclk[MADERA_MCLK2].clk)
+		dev_warn(madera->dev, "Missing MCLK2, requires 32kHz clock\n");
+
 	ret = madera_get_reset_gpio(madera);
 	if (ret)
 		return ret;
@@ -660,13 +675,19 @@ int madera_dev_init(struct madera *madera)
 	}
 
 	/* Init 32k clock sourced from MCLK2 */
+	ret = clk_prepare_enable(madera->mclk[MADERA_MCLK2].clk);
+	if (ret) {
+		dev_err(madera->dev, "Failed to enable 32k clock: %d\n", ret);
+		goto err_reset;
+	}
+
 	ret = regmap_update_bits(madera->regmap,
 			MADERA_CLOCK_32K_1,
 			MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK,
 			MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2);
 	if (ret) {
 		dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret);
-		goto err_reset;
+		goto err_clock;
 	}
 
 	pm_runtime_set_active(madera->dev);
@@ -687,6 +708,8 @@ int madera_dev_init(struct madera *madera)
 
 err_pm_runtime:
 	pm_runtime_disable(madera->dev);
+err_clock:
+	clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
 err_reset:
 	madera_enable_hard_reset(madera);
 	regulator_disable(madera->dcvdd);
@@ -713,6 +736,8 @@ int madera_dev_exit(struct madera *madera)
 	 */
 	pm_runtime_disable(madera->dev);
 
+	clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk);
+
 	regulator_disable(madera->dcvdd);
 	regulator_put(madera->dcvdd);
 
diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h
index 7ffa696cce7ca..ad2c138105d4b 100644
--- a/include/linux/mfd/madera/core.h
+++ b/include/linux/mfd/madera/core.h
@@ -8,6 +8,7 @@
 #ifndef MADERA_CORE_H
 #define MADERA_CORE_H
 
+#include <linux/clk.h>
 #include <linux/gpio/consumer.h>
 #include <linux/interrupt.h>
 #include <linux/mfd/madera/pdata.h>
@@ -29,6 +30,13 @@ enum madera_type {
 	CS42L92 = 9,
 };
 
+enum {
+	MADERA_MCLK1,
+	MADERA_MCLK2,
+	MADERA_MCLK3,
+	MADERA_NUM_MCLK
+};
+
 #define MADERA_MAX_CORE_SUPPLIES	2
 #define MADERA_MAX_GPIOS		40
 
@@ -155,6 +163,7 @@ struct snd_soc_dapm_context;
  * @irq_dev:		the irqchip child driver device
  * @irq_data:		pointer to irqchip data for the child irqchip driver
  * @irq:		host irq number from SPI or I2C configuration
+ * @mclk:		Structure holding clock supplies
  * @out_clamp:		indicates output clamp state for each analogue output
  * @out_shorted:	indicates short circuit state for each analogue output
  * @hp_ena:		bitflags of enable state for the headphone outputs
@@ -184,6 +193,8 @@ struct madera {
 	struct regmap_irq_chip_data *irq_data;
 	int irq;
 
+	struct clk_bulk_data mclk[MADERA_NUM_MCLK];
+
 	unsigned int num_micbias;
 	unsigned int num_childbias[MADERA_MAX_MICBIAS];
 
-- 
2.11.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ