| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191021051322.297560-9-bjorn.andersson@linaro.org>
Date: Sun, 20 Oct 2019 22:13:19 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 08/11] arm64: dts: qcom: msm8996: Pad addresses
Pad all addresses in msm8996.dtsi to 8 digits, in order to make it
easier to ensure ordering when adding new nodes.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 144 +++++++++++++-------------
1 file changed, 72 insertions(+), 72 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 48b5981d01b0..6c1a6774396d 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -520,7 +520,7 @@
rpm_msg_ram: memory@...00 {
compatible = "qcom,rpm-msg-ram";
- reg = <0x68000 0x6000>;
+ reg = <0x00068000 0x6000>;
};
rng: rng@...00 {
@@ -532,28 +532,28 @@
tcsr_mutex_regs: syscon@...000 {
compatible = "syscon";
- reg = <0x740000 0x20000>;
+ reg = <0x00740000 0x20000>;
};
tsens0: thermal-sensor@...000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4a9000 0x1000>, /* TM */
- <0x4a8000 0x1000>; /* SROT */
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
#qcom,sensors = <13>;
#thermal-sensor-cells = <1>;
};
tsens1: thermal-sensor@...000 {
compatible = "qcom,msm8996-tsens";
- reg = <0x4ad000 0x1000>, /* TM */
- <0x4ac000 0x1000>; /* SROT */
+ reg = <0x004ad000 0x1000>, /* TM */
+ <0x004ac000 0x1000>; /* SROT */
#qcom,sensors = <8>;
#thermal-sensor-cells = <1>;
};
tcsr: syscon@...000 {
compatible = "qcom,tcsr-msm8996", "syscon";
- reg = <0x7a0000 0x18000>;
+ reg = <0x007a0000 0x18000>;
};
intc: interrupt-controller@...0000 {
@@ -569,7 +569,7 @@
apcs_glb: mailbox@...0000 {
compatible = "qcom,msm8996-apcs-hmss-global";
- reg = <0x9820000 0x1000>;
+ reg = <0x09820000 0x1000>;
#mbox-cells = <1>;
};
@@ -579,7 +579,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- reg = <0x300000 0x90000>;
+ reg = <0x00300000 0x90000>;
};
stm@...2000 {
@@ -1052,7 +1052,7 @@
kryocc: clock-controller@...0000 {
compatible = "qcom,apcc-msm8996";
- reg = <0x6400000 0x90000>;
+ reg = <0x06400000 0x90000>;
#clock-cells = <1>;
};
@@ -1098,7 +1098,7 @@
blsp2_uart1: serial@...0000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x75b0000 0x1000>;
+ reg = <0x075b0000 0x1000>;
interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
<&gcc GCC_BLSP2_AHB_CLK>;
@@ -1164,7 +1164,7 @@
sdhc2: sdhci@...4900 {
status = "disabled";
compatible = "qcom,sdhci-msm-v4";
- reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
@@ -1249,11 +1249,11 @@
spmi_bus: qcom,spmi@...f000 {
compatible = "qcom,spmi-pmic-arb";
- reg = <0x400f000 0x1000>,
- <0x4400000 0x800000>,
- <0x4c00000 0x800000>,
- <0x5800000 0x200000>,
- <0x400a000 0x002100>;
+ reg = <0x0400f000 0x1000>,
+ <0x04400000 0x800000>,
+ <0x04c00000 0x800000>,
+ <0x05800000 0x200000>,
+ <0x0400a000 0x002100>;
reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
interrupt-names = "periph_irq";
interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
@@ -1267,7 +1267,7 @@
ufsphy: phy@...000 {
compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x627000 0xda8>;
+ reg = <0x00627000 0xda8>;
reg-names = "phy_mem";
#phy-cells = <0>;
@@ -1280,7 +1280,7 @@
ufshc: ufshc@...000 {
compatible = "qcom,ufshc";
- reg = <0x624000 0x2500>;
+ reg = <0x00624000 0x2500>;
interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
phys = <&ufsphy>;
@@ -1339,7 +1339,7 @@
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
- reg = <0x8c0000 0x40000>;
+ reg = <0x008c0000 0x40000>;
assigned-clocks = <&mmcc MMPLL9_PLL>,
<&mmcc MMPLL1_PLL>,
<&mmcc MMPLL3_PLL>,
@@ -1354,7 +1354,7 @@
qfprom@...00 {
compatible = "qcom,qfprom";
- reg = <0x74000 0x8ff>;
+ reg = <0x00074000 0x8ff>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1376,7 +1376,7 @@
pcie_phy: phy@...00 {
compatible = "qcom,msm8996-qmp-pcie-phy";
- reg = <0x34000 0x488>;
+ reg = <0x00034000 0x488>;
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1394,9 +1394,9 @@
status = "disabled";
pciephy_0: lane@...00 {
- reg = <0x035000 0x130>,
- <0x035200 0x200>,
- <0x035400 0x1dc>;
+ reg = <0x00035000 0x130>,
+ <0x00035200 0x200>,
+ <0x00035400 0x1dc>;
#phy-cells = <0>;
clock-output-names = "pcie_0_pipe_clk_src";
@@ -1407,9 +1407,9 @@
};
pciephy_1: lane@...00 {
- reg = <0x036000 0x130>,
- <0x036200 0x200>,
- <0x036400 0x1dc>;
+ reg = <0x00036000 0x130>,
+ <0x00036200 0x200>,
+ <0x00036400 0x1dc>;
#phy-cells = <0>;
clock-output-names = "pcie_1_pipe_clk_src";
@@ -1420,9 +1420,9 @@
};
pciephy_2: lane@...00 {
- reg = <0x037000 0x130>,
- <0x037200 0x200>,
- <0x037400 0x1dc>;
+ reg = <0x00037000 0x130>,
+ <0x00037200 0x200>,
+ <0x00037400 0x1dc>;
#phy-cells = <0>;
clock-output-names = "pcie_2_pipe_clk_src";
@@ -1435,7 +1435,7 @@
usb3phy: phy@...0000 {
compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x7410000 0x1c4>;
+ reg = <0x07410000 0x1c4>;
#clock-cells = <1>;
#address-cells = <1>;
#size-cells = <1>;
@@ -1452,9 +1452,9 @@
status = "disabled";
ssusb_phy_0: lane@...0200 {
- reg = <0x7410200 0x200>,
- <0x7410400 0x130>,
- <0x7410600 0x1a8>;
+ reg = <0x07410200 0x200>,
+ <0x07410400 0x130>,
+ <0x07410600 0x1a8>;
#phy-cells = <0>;
clock-output-names = "usb3_phy_pipe_clk_src";
@@ -1465,7 +1465,7 @@
hsusb_phy1: phy@...1000 {
compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7411000 0x180>;
+ reg = <0x07411000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@@ -1479,7 +1479,7 @@
hsusb_phy2: phy@...2000 {
compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x7412000 0x180>;
+ reg = <0x07412000 0x180>;
#phy-cells = <0>;
clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
@@ -1493,7 +1493,7 @@
usb2: usb@...8800 {
compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x76f8800 0x400>;
+ reg = <0x076f8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1513,7 +1513,7 @@
dwc3@...0000 {
compatible = "snps,dwc3";
- reg = <0x7600000 0xcc00>;
+ reg = <0x07600000 0xcc00>;
interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy2>;
phy-names = "usb2-phy";
@@ -1522,7 +1522,7 @@
usb3: usb@...8800 {
compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x6af8800 0x400>;
+ reg = <0x06af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
@@ -1543,7 +1543,7 @@
dwc3@...0000 {
compatible = "snps,dwc3";
- reg = <0x6a00000 0xcc00>;
+ reg = <0x06a00000 0xcc00>;
interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
phys = <&hsusb_phy1>, <&ssusb_phy_0>;
phy-names = "usb2-phy", "usb3-phy";
@@ -1552,7 +1552,7 @@
vfe_smmu: iommu@...000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xda0000 0x10000>;
+ reg = <0x00da0000 0x10000>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
@@ -1568,20 +1568,20 @@
camss: camss@...000 {
compatible = "qcom,msm8996-camss";
- reg = <0xa34000 0x1000>,
- <0xa00030 0x4>,
- <0xa35000 0x1000>,
- <0xa00038 0x4>,
- <0xa36000 0x1000>,
- <0xa00040 0x4>,
- <0xa30000 0x100>,
- <0xa30400 0x100>,
- <0xa30800 0x100>,
- <0xa30c00 0x100>,
- <0xa31000 0x500>,
- <0xa00020 0x10>,
- <0xa10000 0x1000>,
- <0xa14000 0x1000>;
+ reg = <0x00a34000 0x1000>,
+ <0x00a00030 0x4>,
+ <0x00a35000 0x1000>,
+ <0x00a00038 0x4>,
+ <0x00a36000 0x1000>,
+ <0x00a00040 0x4>,
+ <0x00a30000 0x100>,
+ <0x00a30400 0x100>,
+ <0x00a30800 0x100>,
+ <0x00a30c00 0x100>,
+ <0x00a31000 0x500>,
+ <0x00a00020 0x10>,
+ <0x00a10000 0x1000>,
+ <0x00a14000 0x1000>;
reg-names = "csiphy0",
"csiphy0_clk_mux",
"csiphy1",
@@ -1702,7 +1702,7 @@
adreno_smmu: iommu@...000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xb40000 0x10000>;
+ reg = <0x00b40000 0x10000>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
@@ -1719,7 +1719,7 @@
mdp_smmu: iommu@...000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xd00000 0x10000>;
+ reg = <0x00d00000 0x10000>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
@@ -1735,7 +1735,7 @@
lpass_q6_smmu: iommu@...0000 {
compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x1600000 0x20000>;
+ reg = <0x01600000 0x20000>;
#iommu-cells = <1>;
power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
@@ -1922,7 +1922,7 @@
{
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
- reg = <0x9184000 0x32000>;
+ reg = <0x09184000 0x32000>;
num-channels = <31>;
interrupts = <0 164 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
@@ -1932,7 +1932,7 @@
slim_msm: slim@...0000 {
compatible = "qcom,slim-ngd-v1.5.0";
- reg = <0x91c0000 0x2C000>;
+ reg = <0x091c0000 0x2C000>;
reg-names = "ctrl";
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
dmas = <&slimbam 3>, <&slimbam 4>,
@@ -1976,7 +1976,7 @@
compatible = "qcom,adreno-530.2", "qcom,adreno";
#stream-id-cells = <16>;
- reg = <0xb00000 0x3f000>;
+ reg = <0x00b00000 0x3f000>;
reg-names = "kgsl_3d0_reg_memory";
interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
@@ -2050,9 +2050,9 @@
mdss: mdss@...000 {
compatible = "qcom,mdss";
- reg = <0x900000 0x1000>,
- <0x9b0000 0x1040>,
- <0x9b8000 0x1040>;
+ reg = <0x00900000 0x1000>,
+ <0x009b0000 0x1040>,
+ <0x009b8000 0x1040>;
reg-names = "mdss_phys",
"vbif_phys",
"vbif_nrt_phys";
@@ -2072,7 +2072,7 @@
mdp: mdp@...000 {
compatible = "qcom,mdp5";
- reg = <0x901000 0x90000>;
+ reg = <0x00901000 0x90000>;
reg-names = "mdp_phys";
interrupt-parent = <&mdss>;
@@ -2148,12 +2148,12 @@
hdmi_phy: hdmi-phy@...600 {
#phy-cells = <0>;
compatible = "qcom,hdmi-phy-8996";
- reg = <0x9a0600 0x1c4>,
- <0x9a0a00 0x124>,
- <0x9a0c00 0x124>,
- <0x9a0e00 0x124>,
- <0x9a1000 0x124>,
- <0x9a1200 0x0c8>;
+ reg = <0x009a0600 0x1c4>,
+ <0x009a0a00 0x124>,
+ <0x009a0c00 0x124>,
+ <0x009a0e00 0x124>,
+ <0x009a1000 0x124>,
+ <0x009a1200 0x0c8>;
reg-names = "hdmi_pll",
"hdmi_tx_l0",
"hdmi_tx_l1",
--
2.23.0
Powered by blists - more mailing lists