| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20191021051322.297560-10-bjorn.andersson@linaro.org>
Date: Sun, 20 Oct 2019 22:13:20 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Andy Gross <agross@...nel.org>, Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 09/11] arm64: dts: qcom: msm8996: Sort all nodes in msm8996.dtsi
Sort all the nodes by unit address, then name.
Signed-off-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 3716 ++++++++++++-------------
1 file changed, 1856 insertions(+), 1860 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 6c1a6774396d..60fd8b238c32 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -16,72 +16,19 @@
chosen { };
- memory {
- device_type = "memory";
- /* We expect the bootloader to fill in the reg */
- reg = <0 0 0 0>;
- };
-
- reserved-memory {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- mba_region: mba@...00000 {
- reg = <0x0 0x91500000 0x0 0x200000>;
- no-map;
- };
-
- slpi_region: slpi@...00000 {
- reg = <0x0 0x90b00000 0x0 0xa00000>;
- no-map;
- };
-
- venus_region: venus@...00000 {
- reg = <0x0 0x90400000 0x0 0x700000>;
- no-map;
- };
-
- adsp_region: adsp@...00000 {
- reg = <0x0 0x8ea00000 0x0 0x1a00000>;
- no-map;
- };
-
- mpss_region: mpss@...00000 {
- reg = <0x0 0x88800000 0x0 0x6200000>;
- no-map;
- };
-
- smem_mem: smem-mem@...00000 {
- reg = <0x0 0x86000000 0x0 0x200000>;
- no-map;
- };
-
- memory@...00000 {
- reg = <0x0 0x85800000 0x0 0x800000>;
- no-map;
- };
-
- memory@...00000 {
- reg = <0x0 0x86200000 0x0 0x2600000>;
- no-map;
- };
-
- rmtfs@...00000 {
- compatible = "qcom,rmtfs-mem";
-
- size = <0x0 0x200000>;
- alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
- no-map;
-
- qcom,client-id = <1>;
- qcom,vmid = <15>;
+ clocks {
+ xo_board: xo_board {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "xo_board";
};
- zap_shader_region: gpu@...00000 {
- compatible = "shared-dma-pool";
- reg = <0x0 0x90b00000 0x0 0xa00000>;
- no-map;
+ sleep_clk: sleep_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32764>;
+ clock-output-names = "sleep_clk";
};
};
@@ -173,307 +120,109 @@
};
};
- thermal-zones {
- cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8996";
+ qcom,dload-mode = <&tcsr 0x13000>;
+ };
+ };
- thermal-sensors = <&tsens0 3>;
+ tcsr_mutex: hwlock {
+ compatible = "qcom,tcsr-mutex";
+ syscon = <&tcsr_mutex_regs 0 0x1000>;
+ #hwlock-cells = <1>;
+ };
- trips {
- cpu0_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
+ memory {
+ device_type = "memory";
+ /* We expect the bootloader to fill in the reg */
+ reg = <0 0 0 0>;
+ };
- cpu0_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
- };
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
- cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- thermal-sensors = <&tsens0 5>;
+ mba_region: mba@...00000 {
+ reg = <0x0 0x91500000 0x0 0x200000>;
+ no-map;
+ };
- trips {
- cpu1_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
+ slpi_region: slpi@...00000 {
+ reg = <0x0 0x90b00000 0x0 0xa00000>;
+ no-map;
+ };
- cpu1_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ venus_region: venus@...00000 {
+ reg = <0x0 0x90400000 0x0 0x700000>;
+ no-map;
};
- cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ adsp_region: adsp@...00000 {
+ reg = <0x0 0x8ea00000 0x0 0x1a00000>;
+ no-map;
+ };
- thermal-sensors = <&tsens0 8>;
+ mpss_region: mpss@...00000 {
+ reg = <0x0 0x88800000 0x0 0x6200000>;
+ no-map;
+ };
- trips {
- cpu2_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
+ smem_mem: smem-mem@...00000 {
+ reg = <0x0 0x86000000 0x0 0x200000>;
+ no-map;
+ };
- cpu2_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ memory@...00000 {
+ reg = <0x0 0x85800000 0x0 0x800000>;
+ no-map;
};
- cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ memory@...00000 {
+ reg = <0x0 0x86200000 0x0 0x2600000>;
+ no-map;
+ };
- thermal-sensors = <&tsens0 10>;
+ rmtfs@...00000 {
+ compatible = "qcom,rmtfs-mem";
- trips {
- cpu3_alert0: trip-point@0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
+ size = <0x0 0x200000>;
+ alloc-ranges = <0x0 0xa0000000 0x0 0x2000000>;
+ no-map;
- cpu3_crit: cpu_crit {
- temperature = <110000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
};
- gpu-thermal-top {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 6>;
-
- trips {
- gpu1_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
+ zap_shader_region: gpu@...00000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x90b00000 0x0 0xa00000>;
+ no-map;
};
+ };
- gpu-thermal-bottom {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ rpm-glink {
+ compatible = "qcom,glink-rpm";
- thermal-sensors = <&tsens1 7>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
- trips {
- gpu2_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
- m4m-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ mboxes = <&apcs_glb 0>;
- thermal-sensors = <&tsens0 1>;
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8996";
+ qcom,glink-channels = "rpm_requests";
- trips {
- m4m_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- l3-or-venus-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 2>;
-
- trips {
- l3_or_venus_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- cluster0-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 7>;
-
- trips {
- cluster0_l2_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- cluster1-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens0 12>;
-
- trips {
- cluster1_l2_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 1>;
-
- trips {
- camera_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 2>;
-
- trips {
- q6_dsp_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 3>;
-
- trips {
- mem_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
-
- modemtx-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsens1 4>;
-
- trips {
- modemtx_alert0: trip-point@0 {
- temperature = <90000>;
- hysteresis = <2000>;
- type = "hot";
- };
- };
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
- };
-
- clocks {
- xo_board: xo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <19200000>;
- clock-output-names = "xo_board";
- };
-
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32764>;
- clock-output-names = "sleep_clk";
- };
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-msm8996";
-
- qcom,dload-mode = <&tcsr 0x13000>;
- };
- };
-
- tcsr_mutex: hwlock {
- compatible = "qcom,tcsr-mutex";
- syscon = <&tcsr_mutex_regs 0 0x1000>;
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem_mem>;
- hwlocks = <&tcsr_mutex 3>;
- };
-
- rpm-glink {
- compatible = "qcom,glink-rpm";
-
- interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-
- qcom,rpm-msg-ram = <&rpm_msg_ram>;
-
- mboxes = <&apcs_glb 0>;
-
- rpm_requests: rpm-requests {
- compatible = "qcom,rpm-msm8996";
- qcom,glink-channels = "rpm_requests";
-
- rpmcc: qcom,rpmcc {
- compatible = "qcom,rpmcc-msm8996";
- #clock-cells = <1>;
+ rpmcc: qcom,rpmcc {
+ compatible = "qcom,rpmcc-msm8996";
+ #clock-cells = <1>;
};
rpmpd: power-controller {
@@ -512,1414 +261,1675 @@
};
};
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0 0 0xffffffff>;
- compatible = "simple-bus";
+ smem {
+ compatible = "qcom,smem";
+ memory-region = <&smem_mem>;
+ hwlocks = <&tcsr_mutex 3>;
+ };
- rpm_msg_ram: memory@...00 {
- compatible = "qcom,rpm-msg-ram";
- reg = <0x00068000 0x6000>;
- };
+ smp2p-adsp {
+ compatible = "qcom,smp2p";
+ qcom,smem = <443>, <429>;
- rng: rng@...00 {
- compatible = "qcom,prng-ee";
- reg = <0x00083000 0x1000>;
- clocks = <&gcc GCC_PRNG_AHB_CLK>;
- clock-names = "core";
- };
+ interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
- tcsr_mutex_regs: syscon@...000 {
- compatible = "syscon";
- reg = <0x00740000 0x20000>;
- };
+ mboxes = <&apcs_glb 10>;
- tsens0: thermal-sensor@...000 {
- compatible = "qcom,msm8996-tsens";
- reg = <0x004a9000 0x1000>, /* TM */
- <0x004a8000 0x1000>; /* SROT */
- #qcom,sensors = <13>;
- #thermal-sensor-cells = <1>;
- };
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <2>;
- tsens1: thermal-sensor@...000 {
- compatible = "qcom,msm8996-tsens";
- reg = <0x004ad000 0x1000>, /* TM */
- <0x004ac000 0x1000>; /* SROT */
- #qcom,sensors = <8>;
- #thermal-sensor-cells = <1>;
+ smp2p_adsp_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
};
- tcsr: syscon@...000 {
- compatible = "qcom,tcsr-msm8996", "syscon";
- reg = <0x007a0000 0x18000>;
- };
+ smp2p_adsp_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
- intc: interrupt-controller@...0000 {
- compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
- #interrupt-cells = <3>;
interrupt-controller;
- #redistributor-regions = <1>;
- redistributor-stride = <0x0 0x40000>;
- reg = <0x09bc0000 0x10000>,
- <0x09c00000 0x100000>;
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
};
+ };
- apcs_glb: mailbox@...0000 {
- compatible = "qcom,msm8996-apcs-hmss-global";
- reg = <0x09820000 0x1000>;
+ smp2p-modem {
+ compatible = "qcom,smp2p";
+ qcom,smem = <435>, <428>;
- #mbox-cells = <1>;
- };
+ interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
- gcc: clock-controller@...000 {
- compatible = "qcom,gcc-msm8996";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x00300000 0x90000>;
- };
+ mboxes = <&apcs_glb 14>;
- stm@...2000 {
- compatible = "arm,coresight-stm", "arm,primecell";
- reg = <0x3002000 0x1000>,
- <0x8280000 0x180000>;
- reg-names = "stm-base", "stm-stimulus-base";
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <1>;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- out-ports {
- port {
- stm_out: endpoint {
- remote-endpoint =
- <&funnel0_in>;
- };
- };
- };
+ modem_smp2p_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
};
- tpiu@...0000 {
- compatible = "arm,coresight-tpiu", "arm,primecell";
- reg = <0x3020000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ modem_smp2p_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
- in-ports {
- port {
- tpiu_in: endpoint {
- remote-endpoint =
- <&replicator_out1>;
- };
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
+ };
- funnel@...1000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3021000 0x1000>;
+ smp2p-slpi {
+ compatible = "qcom,smp2p";
+ qcom,smem = <481>, <430>;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ mboxes = <&apcs_glb 26>;
- port@7 {
- reg = <7>;
- funnel0_in: endpoint {
- remote-endpoint =
- <&stm_out>;
- };
- };
- };
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <3>;
- out-ports {
- port {
- funnel0_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in0>;
- };
- };
- };
+ smp2p_slpi_in: slave-kernel {
+ qcom,entry-name = "slave-kernel";
+ interrupt-controller;
+ #interrupt-cells = <2>;
};
- funnel@...2000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3022000 0x1000>;
+ smp2p_slpi_out: master-kernel {
+ qcom,entry-name = "master-kernel";
+ #qcom,smem-state-cells = <1>;
+ };
+ };
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ soc: soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0xffffffff>;
+ compatible = "simple-bus";
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ pcie_phy: phy@...00 {
+ compatible = "qcom,msm8996-qmp-pcie-phy";
+ reg = <0x00034000 0x488>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- port@6 {
- reg = <6>;
- funnel1_in: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_out>;
- };
- };
- };
+ clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+ <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
- out-ports {
- port {
- funnel1_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in1>;
- };
- };
- };
- };
+ resets = <&gcc GCC_PCIE_PHY_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_BCR>,
+ <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+ reset-names = "phy", "common", "cfg";
+ status = "disabled";
- funnel@...3000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3023000 0x1000>;
+ pciephy_0: lane@...00 {
+ reg = <0x00035000 0x130>,
+ <0x00035200 0x200>,
+ <0x00035400 0x1dc>;
+ #phy-cells = <0>;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ clock-output-names = "pcie_0_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+ clock-names = "pipe0";
+ resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+ reset-names = "lane0";
+ };
+ pciephy_1: lane@...00 {
+ reg = <0x00036000 0x130>,
+ <0x00036200 0x200>,
+ <0x00036400 0x1dc>;
+ #phy-cells = <0>;
- out-ports {
- port {
- funnel2_out: endpoint {
- remote-endpoint =
- <&merge_funnel_in2>;
- };
- };
+ clock-output-names = "pcie_1_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+ clock-names = "pipe1";
+ resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+ reset-names = "lane1";
};
- };
- funnel@...5000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3025000 0x1000>;
+ pciephy_2: lane@...00 {
+ reg = <0x00037000 0x130>,
+ <0x00037200 0x200>,
+ <0x00037400 0x1dc>;
+ #phy-cells = <0>;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ clock-output-names = "pcie_2_pipe_clk_src";
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+ clock-names = "pipe2";
+ resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+ reset-names = "lane2";
+ };
+ };
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ rpm_msg_ram: memory@...00 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0x00068000 0x6000>;
+ };
- port@0 {
- reg = <0>;
- merge_funnel_in0: endpoint {
- remote-endpoint =
- <&funnel0_out>;
- };
- };
+ qfprom@...00 {
+ compatible = "qcom,qfprom";
+ reg = <0x00074000 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
- port@1 {
- reg = <1>;
- merge_funnel_in1: endpoint {
- remote-endpoint =
- <&funnel1_out>;
- };
- };
+ qusb2p_hstx_trim: hstx_trim@24e {
+ reg = <0x24e 0x2>;
+ bits = <5 4>;
+ };
- port@2 {
- reg = <2>;
- merge_funnel_in2: endpoint {
- remote-endpoint =
- <&funnel2_out>;
- };
- };
+ qusb2s_hstx_trim: hstx_trim@24f {
+ reg = <0x24f 0x1>;
+ bits = <1 4>;
};
- out-ports {
- port {
- merge_funnel_out: endpoint {
- remote-endpoint =
- <&etf_in>;
- };
- };
+ gpu_speed_bin: gpu_speed_bin@133 {
+ reg = <0x133 0x1>;
+ bits = <5 3>;
};
};
- replicator@...6000 {
- compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
- reg = <0x3026000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ rng: rng@...00 {
+ compatible = "qcom,prng-ee";
+ reg = <0x00083000 0x1000>;
+ clocks = <&gcc GCC_PRNG_AHB_CLK>;
+ clock-names = "core";
+ };
- in-ports {
- port {
- replicator_in: endpoint {
- remote-endpoint =
- <&etf_out>;
- };
- };
- };
+ gcc: clock-controller@...000 {
+ compatible = "qcom,gcc-msm8996";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x00300000 0x90000>;
+ };
- out-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ tsens0: thermal-sensor@...000 {
+ compatible = "qcom,msm8996-tsens";
+ reg = <0x004a9000 0x1000>, /* TM */
+ <0x004a8000 0x1000>; /* SROT */
+ #qcom,sensors = <13>;
+ #thermal-sensor-cells = <1>;
+ };
- port@0 {
- reg = <0>;
- replicator_out0: endpoint {
- remote-endpoint =
- <&etr_in>;
- };
- };
-
- port@1 {
- reg = <1>;
- replicator_out1: endpoint {
- remote-endpoint =
- <&tpiu_in>;
- };
- };
- };
+ tsens1: thermal-sensor@...000 {
+ compatible = "qcom,msm8996-tsens";
+ reg = <0x004ad000 0x1000>, /* TM */
+ <0x004ac000 0x1000>; /* SROT */
+ #qcom,sensors = <8>;
+ #thermal-sensor-cells = <1>;
};
- etf@...7000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x3027000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
-
- in-ports {
- port {
- etf_in: endpoint {
- remote-endpoint =
- <&merge_funnel_out>;
- };
- };
- };
-
- out-ports {
- port {
- etf_out: endpoint {
- remote-endpoint =
- <&replicator_in>;
- };
- };
- };
+ tcsr_mutex_regs: syscon@...000 {
+ compatible = "syscon";
+ reg = <0x00740000 0x20000>;
};
- etr@...8000 {
- compatible = "arm,coresight-tmc", "arm,primecell";
- reg = <0x3028000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
- arm,scatter-gather;
-
- in-ports {
- port {
- etr_in: endpoint {
- remote-endpoint =
- <&replicator_out0>;
- };
- };
- };
+ tcsr: syscon@...000 {
+ compatible = "qcom,tcsr-msm8996", "syscon";
+ reg = <0x007a0000 0x18000>;
};
- debug@...0000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3810000 0x1000>;
-
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
-
- cpu = <&CPU0>;
+ mmcc: clock-controller@...000 {
+ compatible = "qcom,mmcc-msm8996";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ #power-domain-cells = <1>;
+ reg = <0x008c0000 0x40000>;
+ assigned-clocks = <&mmcc MMPLL9_PLL>,
+ <&mmcc MMPLL1_PLL>,
+ <&mmcc MMPLL3_PLL>,
+ <&mmcc MMPLL4_PLL>,
+ <&mmcc MMPLL5_PLL>;
+ assigned-clock-rates = <624000000>,
+ <810000000>,
+ <980000000>,
+ <960000000>,
+ <825000000>;
};
- etm@...0000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3840000 0x1000>;
+ mdss: mdss@...000 {
+ compatible = "qcom,mdss";
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ reg = <0x00900000 0x1000>,
+ <0x009b0000 0x1040>,
+ <0x009b8000 0x1040>;
+ reg-names = "mdss_phys",
+ "vbif_phys",
+ "vbif_nrt_phys";
- cpu = <&CPU0>;
+ power-domains = <&mmcc MDSS_GDSC>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- out-ports {
- port {
- etm0_out: endpoint {
- remote-endpoint =
- <&apss_funnel0_in0>;
- };
- };
- };
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
- debug@...0000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3910000 0x1000>;
+ clocks = <&mmcc MDSS_AHB_CLK>;
+ clock-names = "iface";
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- cpu = <&CPU1>;
- };
+ mdp: mdp@...000 {
+ compatible = "qcom,mdp5";
+ reg = <0x00901000 0x90000>;
+ reg-names = "mdp_phys";
- etm@...0000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3940000 0x1000>;
+ interrupt-parent = <&mdss>;
+ interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ clock-names = "iface",
+ "bus",
+ "core",
+ "iommu",
+ "vsync";
- cpu = <&CPU1>;
+ iommus = <&mdp_smmu 0>;
- out-ports {
- port {
- etm1_out: endpoint {
- remote-endpoint =
- <&apss_funnel0_in1>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ mdp5_intf3_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
};
};
};
- };
- funnel@...0000 { /* APSS Funnel 0 */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x39b0000 0x1000>;
+ hdmi: hdmi-tx@...000 {
+ compatible = "qcom,hdmi-tx-8996";
+ reg = <0x009a0000 0x50c>,
+ <0x00070000 0x6158>,
+ <0x009e0000 0xfff>;
+ reg-names = "core_physical",
+ "qfprom_physical",
+ "hdcp_physical";
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ interrupt-parent = <&mdss>;
+ interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ clocks = <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_HDMI_CLK>,
+ <&mmcc MDSS_HDMI_AHB_CLK>,
+ <&mmcc MDSS_EXTPCLK_CLK>;
+ clock-names =
+ "mdp_core",
+ "iface",
+ "core",
+ "alt_iface",
+ "extp";
- port@0 {
- reg = <0>;
- apss_funnel0_in0: endpoint {
- remote-endpoint = <&etm0_out>;
- };
- };
+ phys = <&hdmi_phy>;
+ phy-names = "hdmi_phy";
+ #sound-dai-cells = <1>;
- port@1 {
- reg = <1>;
- apss_funnel0_in1: endpoint {
- remote-endpoint = <&etm1_out>;
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_in: endpoint {
+ remote-endpoint = <&mdp5_intf3_out>;
+ };
};
};
};
- out-ports {
- port {
- apss_funnel0_out: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_in0>;
- };
- };
+ hdmi_phy: hdmi-phy@...600 {
+ #phy-cells = <0>;
+ compatible = "qcom,hdmi-phy-8996";
+ reg = <0x009a0600 0x1c4>,
+ <0x009a0a00 0x124>,
+ <0x009a0c00 0x124>,
+ <0x009a0e00 0x124>,
+ <0x009a1000 0x124>,
+ <0x009a1200 0x0c8>;
+ reg-names = "hdmi_pll",
+ "hdmi_tx_l0",
+ "hdmi_tx_l1",
+ "hdmi_tx_l2",
+ "hdmi_tx_l3",
+ "hdmi_phy";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&gcc GCC_HDMI_CLKREF_CLK>;
+ clock-names = "iface",
+ "ref";
};
};
+ gpu@...000 {
+ compatible = "qcom,adreno-530.2", "qcom,adreno";
+ #stream-id-cells = <16>;
- debug@...0000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3a10000 0x1000>;
+ reg = <0x00b00000 0x3f000>;
+ reg-names = "kgsl_3d0_reg_memory";
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
+ interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
- cpu = <&CPU2>;
- };
+ clocks = <&mmcc GPU_GX_GFX3D_CLK>,
+ <&mmcc GPU_AHB_CLK>,
+ <&mmcc GPU_GX_RBBMTIMER_CLK>,
+ <&gcc GCC_BIMC_GFX_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
- etm@...0000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3a40000 0x1000>;
+ clock-names = "core",
+ "iface",
+ "rbbmtimer",
+ "mem",
+ "mem_iface";
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ power-domains = <&mmcc GPU_GDSC>;
+ iommus = <&adreno_smmu 0>;
- cpu = <&CPU2>;
+ nvmem-cells = <&gpu_speed_bin>;
+ nvmem-cell-names = "speed_bin";
- out-ports {
- port {
- etm2_out: endpoint {
- remote-endpoint =
- <&apss_funnel1_in0>;
- };
+ qcom,gpu-quirk-two-pass-use-wfi;
+ qcom,gpu-quirk-fault-detect-mask;
+
+ operating-points-v2 = <&gpu_opp_table>;
+
+ gpu_opp_table: opp-table {
+ compatible ="operating-points-v2";
+
+ /*
+ * 624Mhz and 560Mhz are only available on speed
+ * bin (1 << 0). All the rest are available on
+ * all bins of the hardware
+ */
+ opp-624000000 {
+ opp-hz = /bits/ 64 <624000000>;
+ opp-supported-hw = <0x01>;
+ };
+ opp-560000000 {
+ opp-hz = /bits/ 64 <560000000>;
+ opp-supported-hw = <0x01>;
+ };
+ opp-510000000 {
+ opp-hz = /bits/ 64 <510000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-401800000 {
+ opp-hz = /bits/ 64 <401800000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-315000000 {
+ opp-hz = /bits/ 64 <315000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-214000000 {
+ opp-hz = /bits/ 64 <214000000>;
+ opp-supported-hw = <0xFF>;
+ };
+ opp-133000000 {
+ opp-hz = /bits/ 64 <133000000>;
+ opp-supported-hw = <0xFF>;
};
};
- };
- debug@...0000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0x3b10000 0x1000>;
+ zap-shader {
+ memory-region = <&zap_shader_region>;
+ };
+ };
- clocks = <&rpmcc RPM_QDSS_CLK>;
- clock-names = "apb_pclk";
+ msmgpio: pinctrl@...0000 {
+ compatible = "qcom,msm8996-pinctrl";
+ reg = <0x01010000 0x300000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
- cpu = <&CPU3>;
+ spmi_bus: qcom,spmi@...f000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0x0400f000 0x1000>,
+ <0x04400000 0x800000>,
+ <0x04c00000 0x800000>,
+ <0x05800000 0x200000>,
+ <0x0400a000 0x002100>;
+ reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
};
- etm@...0000 {
- compatible = "arm,coresight-etm4x", "arm,primecell";
- reg = <0x3b40000 0x1000>;
+ agnoc@0 {
+ power-domains = <&gcc AGGRE0_NOC_GDSC>;
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ pcie0: pcie@...000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ status = "disabled";
+ power-domains = <&gcc PCIE0_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
- cpu = <&CPU3>;
+ reg = <0x00600000 0x2000>,
+ <0x0c000000 0xf1d>,
+ <0x0c000f20 0xa8>,
+ <0x0c100000 0x100000>;
+ reg-names = "parf", "dbi", "elbi","config";
- out-ports {
- port {
- etm3_out: endpoint {
- remote-endpoint =
- <&apss_funnel1_in1>;
- };
- };
- };
- };
+ phys = <&pciephy_0>;
+ phy-names = "pciephy";
- funnel@...0000 { /* APSS Funnel 1 */
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3bb0000 0x1000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
+ pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
- port@0 {
- reg = <0>;
- apss_funnel1_in0: endpoint {
- remote-endpoint = <&etm2_out>;
- };
- };
+ linux,pci-domain = <0>;
- port@1 {
- reg = <1>;
- apss_funnel1_in1: endpoint {
- remote-endpoint = <&etm3_out>;
- };
- };
- };
+ clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+ <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
- out-ports {
- port {
- apss_funnel1_out: endpoint {
- remote-endpoint =
- <&apss_merge_funnel_in1>;
- };
- };
};
- };
- funnel@...0000 {
- compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
- reg = <0x3bc0000 0x1000>;
+ pcie1: pcie@...000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ power-domains = <&gcc PCIE1_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
- clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
- clock-names = "apb_pclk", "atclk";
+ status = "disabled";
- in-ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ reg = <0x00608000 0x2000>,
+ <0x0d000000 0xf1d>,
+ <0x0d000f20 0xa8>,
+ <0x0d100000 0x100000>;
- port@0 {
- reg = <0>;
- apss_merge_funnel_in0: endpoint {
- remote-endpoint =
- <&apss_funnel0_out>;
- };
- };
+ reg-names = "parf", "dbi", "elbi","config";
- port@1 {
- reg = <1>;
- apss_merge_funnel_in1: endpoint {
- remote-endpoint =
- <&apss_funnel1_out>;
- };
- };
- };
+ phys = <&pciephy_1>;
+ phy-names = "pciephy";
- out-ports {
- port {
- apss_merge_funnel_out: endpoint {
- remote-endpoint =
- <&funnel1_in>;
- };
- };
- };
- };
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
- kryocc: clock-controller@...0000 {
- compatible = "qcom,apcc-msm8996";
- reg = <0x06400000 0x90000>;
- #clock-cells = <1>;
- };
+ interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
- blsp1_uart1: serial@...0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x07570000 0x1000>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
+ pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+
+ linux,pci-domain = <1>;
+
+ clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
+ <&gcc GCC_PCIE_1_AUX_CLK>,
+ <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+ };
+
+ pcie2: pcie@...000 {
+ compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
+ power-domains = <&gcc PCIE2_GDSC>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ status = "disabled";
+ reg = <0x00610000 0x2000>,
+ <0x0e000000 0xf1d>,
+ <0x0e000f20 0xa8>,
+ <0x0e100000 0x100000>;
+
+ reg-names = "parf", "dbi", "elbi","config";
+
+ phys = <&pciephy_2>;
+ phy-names = "pciephy";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
+ <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+
+ device_type = "pci";
+
+ interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+ <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+ <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+ <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
+ pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+
+ linux,pci-domain = <2>;
+ clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
+ <&gcc GCC_PCIE_2_AUX_CLK>,
+ <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+
+ clock-names = "pipe",
+ "aux",
+ "cfg",
+ "bus_master",
+ "bus_slave";
+ };
+ };
+
+ ufshc: ufshc@...000 {
+ compatible = "qcom,ufshc";
+ reg = <0x00624000 0x2500>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+
+ phys = <&ufsphy>;
+ phy-names = "ufsphy";
+
+ power-domains = <&gcc UFS_GDSC>;
+
+ clock-names =
+ "core_clk_src",
+ "core_clk",
+ "bus_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro_src",
+ "core_clk_unipro",
+ "core_clk_ice",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk";
+ clocks =
+ <&gcc UFS_AXI_CLK_SRC>,
+ <&gcc GCC_UFS_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
+ <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+ <&gcc GCC_UFS_AHB_CLK>,
+ <&gcc UFS_ICE_CORE_CLK_SRC>,
+ <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
+ <&gcc GCC_UFS_ICE_CORE_CLK>,
+ <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
+ freq-table-hz =
+ <100000000 200000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <150000000 300000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <0 0>;
+
+ lanes-per-direction = <1>;
+ #reset-cells = <1>;
+ status = "disabled";
+
+ ufs_variant {
+ compatible = "qcom,ufs_variant";
+ };
+ };
+
+ ufsphy: phy@...000 {
+ compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
+ reg = <0x00627000 0xda8>;
+ reg-names = "phy_mem";
+ #phy-cells = <0>;
+
+ clock-names = "ref_clk_src", "ref_clk";
+ clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
+ <&gcc GCC_UFS_CLKREF_CLK>;
+ resets = <&ufshc 0>;
+ status = "disabled";
+ };
+
+ camss: camss@...000 {
+ compatible = "qcom,msm8996-camss";
+ reg = <0x00a34000 0x1000>,
+ <0x00a00030 0x4>,
+ <0x00a35000 0x1000>,
+ <0x00a00038 0x4>,
+ <0x00a36000 0x1000>,
+ <0x00a00040 0x4>,
+ <0x00a30000 0x100>,
+ <0x00a30400 0x100>,
+ <0x00a30800 0x100>,
+ <0x00a30c00 0x100>,
+ <0x00a31000 0x500>,
+ <0x00a00020 0x10>,
+ <0x00a10000 0x1000>,
+ <0x00a14000 0x1000>;
+ reg-names = "csiphy0",
+ "csiphy0_clk_mux",
+ "csiphy1",
+ "csiphy1_clk_mux",
+ "csiphy2",
+ "csiphy2_clk_mux",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "csi_clk_mux",
+ "vfe0",
+ "vfe1";
+ interrupts = <GIC_SPI 78 0>,
+ <GIC_SPI 79 0>,
+ <GIC_SPI 80 0>,
+ <GIC_SPI 296 0>,
+ <GIC_SPI 297 0>,
+ <GIC_SPI 298 0>,
+ <GIC_SPI 299 0>,
+ <GIC_SPI 309 0>,
+ <GIC_SPI 314 0>,
+ <GIC_SPI 315 0>;
+ interrupt-names = "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csid0",
+ "csid1",
+ "csid2",
+ "csid3",
+ "ispif",
+ "vfe0",
+ "vfe1";
+ power-domains = <&mmcc VFE0_GDSC>;
+ clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
+ <&mmcc CAMSS_ISPIF_AHB_CLK>,
+ <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
+ <&mmcc CAMSS_CSI0_AHB_CLK>,
+ <&mmcc CAMSS_CSI0_CLK>,
+ <&mmcc CAMSS_CSI0PHY_CLK>,
+ <&mmcc CAMSS_CSI0PIX_CLK>,
+ <&mmcc CAMSS_CSI0RDI_CLK>,
+ <&mmcc CAMSS_CSI1_AHB_CLK>,
+ <&mmcc CAMSS_CSI1_CLK>,
+ <&mmcc CAMSS_CSI1PHY_CLK>,
+ <&mmcc CAMSS_CSI1PIX_CLK>,
+ <&mmcc CAMSS_CSI1RDI_CLK>,
+ <&mmcc CAMSS_CSI2_AHB_CLK>,
+ <&mmcc CAMSS_CSI2_CLK>,
+ <&mmcc CAMSS_CSI2PHY_CLK>,
+ <&mmcc CAMSS_CSI2PIX_CLK>,
+ <&mmcc CAMSS_CSI2RDI_CLK>,
+ <&mmcc CAMSS_CSI3_AHB_CLK>,
+ <&mmcc CAMSS_CSI3_CLK>,
+ <&mmcc CAMSS_CSI3PHY_CLK>,
+ <&mmcc CAMSS_CSI3PIX_CLK>,
+ <&mmcc CAMSS_CSI3RDI_CLK>,
+ <&mmcc CAMSS_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_CLK>,
+ <&mmcc CAMSS_CSI_VFE0_CLK>,
+ <&mmcc CAMSS_VFE0_AHB_CLK>,
+ <&mmcc CAMSS_VFE0_STREAM_CLK>,
+ <&mmcc CAMSS_VFE1_CLK>,
+ <&mmcc CAMSS_CSI_VFE1_CLK>,
+ <&mmcc CAMSS_VFE1_AHB_CLK>,
+ <&mmcc CAMSS_VFE1_STREAM_CLK>,
+ <&mmcc CAMSS_VFE_AHB_CLK>,
+ <&mmcc CAMSS_VFE_AXI_CLK>;
+ clock-names = "top_ahb",
+ "ispif_ahb",
+ "csiphy0_timer",
+ "csiphy1_timer",
+ "csiphy2_timer",
+ "csi0_ahb",
+ "csi0",
+ "csi0_phy",
+ "csi0_pix",
+ "csi0_rdi",
+ "csi1_ahb",
+ "csi1",
+ "csi1_phy",
+ "csi1_pix",
+ "csi1_rdi",
+ "csi2_ahb",
+ "csi2",
+ "csi2_phy",
+ "csi2_pix",
+ "csi2_rdi",
+ "csi3_ahb",
+ "csi3",
+ "csi3_phy",
+ "csi3_pix",
+ "csi3_rdi",
+ "ahb",
+ "vfe0",
+ "csi_vfe0",
+ "vfe0_ahb",
+ "vfe0_stream",
+ "vfe1",
+ "csi_vfe1",
+ "vfe1_ahb",
+ "vfe1_stream",
+ "vfe_ahb",
+ "vfe_axi";
+ iommus = <&vfe_smmu 0>,
+ <&vfe_smmu 1>,
+ <&vfe_smmu 2>,
+ <&vfe_smmu 3>;
status = "disabled";
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
};
- blsp1_spi0: spi@...5000 {
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x07575000 0x600>;
- interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
- <&gcc GCC_BLSP1_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_spi0_default>;
- pinctrl-1 = <&blsp1_spi0_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ adreno_smmu: iommu@...000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00b40000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+
+ clocks = <&mmcc GPU_AHB_CLK>,
+ <&gcc GCC_MMSS_BIMC_GFX_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc GPU_GDSC>;
};
- blsp2_i2c0: i2c@...5000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x075b5000 0x1000>;
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c0_default>;
- pinctrl-1 = <&blsp2_i2c0_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ video-codec@...000 {
+ compatible = "qcom,msm8996-venus";
+ reg = <0x00c00000 0xff000>;
+ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc VENUS_GDSC>;
+ clocks = <&mmcc VIDEO_CORE_CLK>,
+ <&mmcc VIDEO_AHB_CLK>,
+ <&mmcc VIDEO_AXI_CLK>,
+ <&mmcc VIDEO_MAXI_CLK>;
+ clock-names = "core", "iface", "bus", "mbus";
+ iommus = <&venus_smmu 0x00>,
+ <&venus_smmu 0x01>,
+ <&venus_smmu 0x0a>,
+ <&venus_smmu 0x07>,
+ <&venus_smmu 0x0e>,
+ <&venus_smmu 0x0f>,
+ <&venus_smmu 0x08>,
+ <&venus_smmu 0x09>,
+ <&venus_smmu 0x0b>,
+ <&venus_smmu 0x0c>,
+ <&venus_smmu 0x0d>,
+ <&venus_smmu 0x10>,
+ <&venus_smmu 0x11>,
+ <&venus_smmu 0x21>,
+ <&venus_smmu 0x28>,
+ <&venus_smmu 0x29>,
+ <&venus_smmu 0x2b>,
+ <&venus_smmu 0x2c>,
+ <&venus_smmu 0x2d>,
+ <&venus_smmu 0x31>;
+ memory-region = <&venus_region>;
+ status = "okay";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE0_GDSC>;
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
+ clock-names = "core";
+ power-domains = <&mmcc VENUS_CORE1_GDSC>;
+ };
};
- blsp2_uart1: serial@...0000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x075b0000 0x1000>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
+ mdp_smmu: iommu@...000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00d00000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ clocks = <&mmcc SMMU_MDP_AHB_CLK>,
+ <&mmcc SMMU_MDP_AXI_CLK>;
+ clock-names = "iface", "bus";
+
+ power-domains = <&mmcc MDSS_GDSC>;
};
- blsp2_i2c1: i2c@...6000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x075b6000 0x1000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_AHB_CLK>,
- <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_i2c1_default>;
- pinctrl-1 = <&blsp2_i2c1_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ venus_smmu: arm,smmu-venus@...000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0xd40000 0x20000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
+ clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
+ <&mmcc SMMU_VIDEO_AXI_CLK>;
+ clock-names = "iface", "bus";
+ #iommu-cells = <1>;
+ status = "okay";
};
- blsp2_uart2: serial@...1000 {
- compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- reg = <0x075b1000 0x1000>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
+ vfe_smmu: iommu@...000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x00da0000 0x10000>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
+ clocks = <&mmcc SMMU_VFE_AHB_CLK>,
+ <&mmcc SMMU_VFE_AXI_CLK>;
+ clock-names = "iface",
+ "bus";
+ #iommu-cells = <1>;
};
- blsp1_i2c2: i2c@...7000 {
- compatible = "qcom,i2c-qup-v2.2.1";
- reg = <0x07577000 0x1000>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP1_AHB_CLK>,
- <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
- clock-names = "iface", "core";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_i2c2_default>;
- pinctrl-1 = <&blsp1_i2c2_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ lpass_q6_smmu: iommu@...0000 {
+ compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
+ reg = <0x01600000 0x20000>;
+ #iommu-cells = <1>;
+ power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
+ <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
+ clock-names = "iface", "bus";
};
- blsp2_spi5: spi@...a000{
- compatible = "qcom,spi-qup-v2.2.1";
- reg = <0x075ba000 0x600>;
- interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
- <&gcc GCC_BLSP2_AHB_CLK>;
- clock-names = "core", "iface";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp2_spi5_default>;
- pinctrl-1 = <&blsp2_spi5_sleep>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
+ stm@...2000 {
+ compatible = "arm,coresight-stm", "arm,primecell";
+ reg = <0x3002000 0x1000>,
+ <0x8280000 0x180000>;
+ reg-names = "stm-base", "stm-stimulus-base";
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ out-ports {
+ port {
+ stm_out: endpoint {
+ remote-endpoint =
+ <&funnel0_in>;
+ };
+ };
+ };
+ };
+
+ tpiu@...0000 {
+ compatible = "arm,coresight-tpiu", "arm,primecell";
+ reg = <0x3020000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ in-ports {
+ port {
+ tpiu_in: endpoint {
+ remote-endpoint =
+ <&replicator_out1>;
+ };
+ };
+ };
};
- sdhc2: sdhci@...4900 {
- status = "disabled";
- compatible = "qcom,sdhci-msm-v4";
- reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
- reg-names = "hc_mem", "core_mem";
+ funnel@...1000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3021000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
- <0 221 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "hc_irq", "pwr_irq";
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- clock-names = "iface", "core", "xo";
- clocks = <&gcc GCC_SDCC2_AHB_CLK>,
- <&gcc GCC_SDCC2_APPS_CLK>,
- <&xo_board>;
- bus-width = <4>;
- };
+ port@7 {
+ reg = <7>;
+ funnel0_in: endpoint {
+ remote-endpoint =
+ <&stm_out>;
+ };
+ };
+ };
- msmgpio: pinctrl@...0000 {
- compatible = "qcom,msm8996-pinctrl";
- reg = <0x01010000 0x300000>;
- interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ out-ports {
+ port {
+ funnel0_out: endpoint {
+ remote-endpoint =
+ <&merge_funnel_in0>;
+ };
+ };
+ };
};
- timer@...0000 {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "arm,armv7-timer-mem";
- reg = <0x09840000 0x1000>;
- clock-frequency = <19200000>;
+ funnel@...2000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3022000 0x1000>;
- frame@...0000 {
- frame-number = <0>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09850000 0x1000>,
- <0x09860000 0x1000>;
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- frame@...0000 {
- frame-number = <1>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09870000 0x1000>;
- status = "disabled";
- };
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- frame@...0000 {
- frame-number = <2>;
- interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09880000 0x1000>;
- status = "disabled";
+ port@6 {
+ reg = <6>;
+ funnel1_in: endpoint {
+ remote-endpoint =
+ <&apss_merge_funnel_out>;
+ };
+ };
};
- frame@...0000 {
- frame-number = <3>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x09890000 0x1000>;
- status = "disabled";
+ out-ports {
+ port {
+ funnel1_out: endpoint {
+ remote-endpoint =
+ <&merge_funnel_in1>;
+ };
+ };
};
+ };
- frame@...0000 {
- frame-number = <4>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098a0000 0x1000>;
- status = "disabled";
- };
+ funnel@...3000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3023000 0x1000>;
- frame@...0000 {
- frame-number = <5>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098b0000 0x1000>;
- status = "disabled";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- frame@...0000 {
- frame-number = <6>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x098c0000 0x1000>;
- status = "disabled";
+
+ out-ports {
+ port {
+ funnel2_out: endpoint {
+ remote-endpoint =
+ <&merge_funnel_in2>;
+ };
+ };
};
};
- spmi_bus: qcom,spmi@...f000 {
- compatible = "qcom,spmi-pmic-arb";
- reg = <0x0400f000 0x1000>,
- <0x04400000 0x800000>,
- <0x04c00000 0x800000>,
- <0x05800000 0x200000>,
- <0x0400a000 0x002100>;
- reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
- interrupt-names = "periph_irq";
- interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
- qcom,ee = <0>;
- qcom,channel = <0>;
- #address-cells = <2>;
- #size-cells = <0>;
- interrupt-controller;
- #interrupt-cells = <4>;
- };
+ funnel@...5000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3025000 0x1000>;
- ufsphy: phy@...000 {
- compatible = "qcom,msm8996-ufs-phy-qmp-14nm";
- reg = <0x00627000 0xda8>;
- reg-names = "phy_mem";
- #phy-cells = <0>;
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- clock-names = "ref_clk_src", "ref_clk";
- clocks = <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_CLKREF_CLK>;
- resets = <&ufshc 0>;
- status = "disabled";
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ merge_funnel_in0: endpoint {
+ remote-endpoint =
+ <&funnel0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ merge_funnel_in1: endpoint {
+ remote-endpoint =
+ <&funnel1_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+ merge_funnel_in2: endpoint {
+ remote-endpoint =
+ <&funnel2_out>;
+ };
+ };
+ };
+
+ out-ports {
+ port {
+ merge_funnel_out: endpoint {
+ remote-endpoint =
+ <&etf_in>;
+ };
+ };
+ };
};
- ufshc: ufshc@...000 {
- compatible = "qcom,ufshc";
- reg = <0x00624000 0x2500>;
- interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+ replicator@...6000 {
+ compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
+ reg = <0x3026000 0x1000>;
- phys = <&ufsphy>;
- phy-names = "ufsphy";
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- power-domains = <&gcc UFS_GDSC>;
+ in-ports {
+ port {
+ replicator_in: endpoint {
+ remote-endpoint =
+ <&etf_out>;
+ };
+ };
+ };
- clock-names =
- "core_clk_src",
- "core_clk",
- "bus_clk",
- "bus_aggr_clk",
- "iface_clk",
- "core_clk_unipro_src",
- "core_clk_unipro",
- "core_clk_ice",
- "ref_clk",
- "tx_lane0_sync_clk",
- "rx_lane0_sync_clk";
- clocks =
- <&gcc UFS_AXI_CLK_SRC>,
- <&gcc GCC_UFS_AXI_CLK>,
- <&gcc GCC_SYS_NOC_UFS_AXI_CLK>,
- <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
- <&gcc GCC_UFS_AHB_CLK>,
- <&gcc UFS_ICE_CORE_CLK_SRC>,
- <&gcc GCC_UFS_UNIPRO_CORE_CLK>,
- <&gcc GCC_UFS_ICE_CORE_CLK>,
- <&rpmcc RPM_SMD_LN_BB_CLK>,
- <&gcc GCC_UFS_TX_SYMBOL_0_CLK>,
- <&gcc GCC_UFS_RX_SYMBOL_0_CLK>;
- freq-table-hz =
- <100000000 200000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <150000000 300000000>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>,
- <0 0>;
+ out-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- lanes-per-direction = <1>;
- #reset-cells = <1>;
- status = "disabled";
+ port@0 {
+ reg = <0>;
+ replicator_out0: endpoint {
+ remote-endpoint =
+ <&etr_in>;
+ };
+ };
- ufs_variant {
- compatible = "qcom,ufs_variant";
+ port@1 {
+ reg = <1>;
+ replicator_out1: endpoint {
+ remote-endpoint =
+ <&tpiu_in>;
+ };
+ };
};
};
- mmcc: clock-controller@...000 {
- compatible = "qcom,mmcc-msm8996";
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- reg = <0x008c0000 0x40000>;
- assigned-clocks = <&mmcc MMPLL9_PLL>,
- <&mmcc MMPLL1_PLL>,
- <&mmcc MMPLL3_PLL>,
- <&mmcc MMPLL4_PLL>,
- <&mmcc MMPLL5_PLL>;
- assigned-clock-rates = <624000000>,
- <810000000>,
- <980000000>,
- <960000000>,
- <825000000>;
- };
+ etf@...7000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x3027000 0x1000>;
- qfprom@...00 {
- compatible = "qcom,qfprom";
- reg = <0x00074000 0x8ff>;
- #address-cells = <1>;
- #size-cells = <1>;
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- qusb2p_hstx_trim: hstx_trim@24e {
- reg = <0x24e 0x2>;
- bits = <5 4>;
+ in-ports {
+ port {
+ etf_in: endpoint {
+ remote-endpoint =
+ <&merge_funnel_out>;
+ };
+ };
};
- qusb2s_hstx_trim: hstx_trim@24f {
- reg = <0x24f 0x1>;
- bits = <1 4>;
+ out-ports {
+ port {
+ etf_out: endpoint {
+ remote-endpoint =
+ <&replicator_in>;
+ };
+ };
};
+ };
- gpu_speed_bin: gpu_speed_bin@133 {
- reg = <0x133 0x1>;
- bits = <5 3>;
+ etr@...8000 {
+ compatible = "arm,coresight-tmc", "arm,primecell";
+ reg = <0x3028000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+ arm,scatter-gather;
+
+ in-ports {
+ port {
+ etr_in: endpoint {
+ remote-endpoint =
+ <&replicator_out0>;
+ };
+ };
};
};
- pcie_phy: phy@...00 {
- compatible = "qcom,msm8996-qmp-pcie-phy";
- reg = <0x00034000 0x488>;
- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ debug@...0000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3810000 0x1000>;
- clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
- <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- resets = <&gcc GCC_PCIE_PHY_BCR>,
- <&gcc GCC_PCIE_PHY_COM_BCR>,
- <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
- reset-names = "phy", "common", "cfg";
- status = "disabled";
+ cpu = <&CPU0>;
+ };
- pciephy_0: lane@...00 {
- reg = <0x00035000 0x130>,
- <0x00035200 0x200>,
- <0x00035400 0x1dc>;
- #phy-cells = <0>;
+ etm@...0000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3840000 0x1000>;
- clock-output-names = "pcie_0_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
- clock-names = "pipe0";
- resets = <&gcc GCC_PCIE_0_PHY_BCR>;
- reset-names = "lane0";
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- pciephy_1: lane@...00 {
- reg = <0x00036000 0x130>,
- <0x00036200 0x200>,
- <0x00036400 0x1dc>;
- #phy-cells = <0>;
+ cpu = <&CPU0>;
- clock-output-names = "pcie_1_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
- clock-names = "pipe1";
- resets = <&gcc GCC_PCIE_1_PHY_BCR>;
- reset-names = "lane1";
+ out-ports {
+ port {
+ etm0_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel0_in0>;
+ };
+ };
};
+ };
- pciephy_2: lane@...00 {
- reg = <0x00037000 0x130>,
- <0x00037200 0x200>,
- <0x00037400 0x1dc>;
- #phy-cells = <0>;
+ debug@...0000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3910000 0x1000>;
- clock-output-names = "pcie_2_pipe_clk_src";
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
- clock-names = "pipe2";
- resets = <&gcc GCC_PCIE_2_PHY_BCR>;
- reset-names = "lane2";
- };
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- usb3phy: phy@...0000 {
- compatible = "qcom,msm8996-qmp-usb3-phy";
- reg = <0x07410000 0x1c4>;
- #clock-cells = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ cpu = <&CPU1>;
+ };
- clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_USB3_CLKREF_CLK>;
- clock-names = "aux", "cfg_ahb", "ref";
+ etm@...0000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3940000 0x1000>;
- resets = <&gcc GCC_USB3_PHY_BCR>,
- <&gcc GCC_USB3PHY_PHY_BCR>;
- reset-names = "phy", "common";
- status = "disabled";
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- ssusb_phy_0: lane@...0200 {
- reg = <0x07410200 0x200>,
- <0x07410400 0x130>,
- <0x07410600 0x1a8>;
- #phy-cells = <0>;
+ cpu = <&CPU1>;
- clock-output-names = "usb3_phy_pipe_clk_src";
- clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
- clock-names = "pipe0";
+ out-ports {
+ port {
+ etm1_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel0_in1>;
+ };
+ };
};
};
- hsusb_phy1: phy@...1000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x07411000 0x180>;
- #phy-cells = <0>;
+ funnel@...0000 { /* APSS Funnel 0 */
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x39b0000 0x1000>;
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX1_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
- nvmem-cells = <&qusb2p_hstx_trim>;
- status = "disabled";
- };
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- hsusb_phy2: phy@...2000 {
- compatible = "qcom,msm8996-qusb2-phy";
- reg = <0x07412000 0x180>;
- #phy-cells = <0>;
+ port@0 {
+ reg = <0>;
+ apss_funnel0_in0: endpoint {
+ remote-endpoint = <&etm0_out>;
+ };
+ };
- clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
- <&gcc GCC_RX2_USB2_CLKREF_CLK>;
- clock-names = "cfg_ahb", "ref";
+ port@1 {
+ reg = <1>;
+ apss_funnel0_in1: endpoint {
+ remote-endpoint = <&etm1_out>;
+ };
+ };
+ };
- resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
- nvmem-cells = <&qusb2s_hstx_trim>;
- status = "disabled";
+ out-ports {
+ port {
+ apss_funnel0_out: endpoint {
+ remote-endpoint =
+ <&apss_merge_funnel_in0>;
+ };
+ };
+ };
};
- usb2: usb@...8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x076f8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ debug@...0000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3a10000 0x1000>;
+
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
+
+ cpu = <&CPU2>;
+ };
- clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>,
- <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_SLEEP_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+ etm@...0000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3a40000 0x1000>;
- assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
- <&gcc GCC_USB20_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <60000000>;
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- power-domains = <&gcc USB30_GDSC>;
- status = "disabled";
+ cpu = <&CPU2>;
- dwc3@...0000 {
- compatible = "snps,dwc3";
- reg = <0x07600000 0xcc00>;
- interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy2>;
- phy-names = "usb2-phy";
+ out-ports {
+ port {
+ etm2_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel1_in0>;
+ };
+ };
};
};
- usb3: usb@...8800 {
- compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
- reg = <0x06af8800 0x400>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ debug@...0000 {
+ compatible = "arm,coresight-cpu-debug", "arm,primecell";
+ reg = <0x3b10000 0x1000>;
- clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>,
- <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
- <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_SLEEP_CLK>,
- <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
+ clocks = <&rpmcc RPM_QDSS_CLK>;
+ clock-names = "apb_pclk";
- assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
- <&gcc GCC_USB30_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <120000000>;
+ cpu = <&CPU3>;
+ };
- power-domains = <&gcc USB30_GDSC>;
- status = "disabled";
+ etm@...0000 {
+ compatible = "arm,coresight-etm4x", "arm,primecell";
+ reg = <0x3b40000 0x1000>;
- dwc3@...0000 {
- compatible = "snps,dwc3";
- reg = <0x06a00000 0xcc00>;
- interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
- phys = <&hsusb_phy1>, <&ssusb_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
+
+ cpu = <&CPU3>;
+
+ out-ports {
+ port {
+ etm3_out: endpoint {
+ remote-endpoint =
+ <&apss_funnel1_in1>;
+ };
+ };
};
};
- vfe_smmu: iommu@...000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x00da0000 0x10000>;
+ funnel@...0000 { /* APSS Funnel 1 */
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3bb0000 0x1000>;
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc MMAGIC_CAMSS_GDSC>;
- clocks = <&mmcc SMMU_VFE_AHB_CLK>,
- <&mmcc SMMU_VFE_AXI_CLK>;
- clock-names = "iface",
- "bus";
- #iommu-cells = <1>;
- };
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- camss: camss@...000 {
- compatible = "qcom,msm8996-camss";
- reg = <0x00a34000 0x1000>,
- <0x00a00030 0x4>,
- <0x00a35000 0x1000>,
- <0x00a00038 0x4>,
- <0x00a36000 0x1000>,
- <0x00a00040 0x4>,
- <0x00a30000 0x100>,
- <0x00a30400 0x100>,
- <0x00a30800 0x100>,
- <0x00a30c00 0x100>,
- <0x00a31000 0x500>,
- <0x00a00020 0x10>,
- <0x00a10000 0x1000>,
- <0x00a14000 0x1000>;
- reg-names = "csiphy0",
- "csiphy0_clk_mux",
- "csiphy1",
- "csiphy1_clk_mux",
- "csiphy2",
- "csiphy2_clk_mux",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
- "ispif",
- "csi_clk_mux",
- "vfe0",
- "vfe1";
- interrupts = <GIC_SPI 78 0>,
- <GIC_SPI 79 0>,
- <GIC_SPI 80 0>,
- <GIC_SPI 296 0>,
- <GIC_SPI 297 0>,
- <GIC_SPI 298 0>,
- <GIC_SPI 299 0>,
- <GIC_SPI 309 0>,
- <GIC_SPI 314 0>,
- <GIC_SPI 315 0>;
- interrupt-names = "csiphy0",
- "csiphy1",
- "csiphy2",
- "csid0",
- "csid1",
- "csid2",
- "csid3",
- "ispif",
- "vfe0",
- "vfe1";
- power-domains = <&mmcc VFE0_GDSC>;
- clocks = <&mmcc CAMSS_TOP_AHB_CLK>,
- <&mmcc CAMSS_ISPIF_AHB_CLK>,
- <&mmcc CAMSS_CSI0PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI1PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI2PHYTIMER_CLK>,
- <&mmcc CAMSS_CSI0_AHB_CLK>,
- <&mmcc CAMSS_CSI0_CLK>,
- <&mmcc CAMSS_CSI0PHY_CLK>,
- <&mmcc CAMSS_CSI0PIX_CLK>,
- <&mmcc CAMSS_CSI0RDI_CLK>,
- <&mmcc CAMSS_CSI1_AHB_CLK>,
- <&mmcc CAMSS_CSI1_CLK>,
- <&mmcc CAMSS_CSI1PHY_CLK>,
- <&mmcc CAMSS_CSI1PIX_CLK>,
- <&mmcc CAMSS_CSI1RDI_CLK>,
- <&mmcc CAMSS_CSI2_AHB_CLK>,
- <&mmcc CAMSS_CSI2_CLK>,
- <&mmcc CAMSS_CSI2PHY_CLK>,
- <&mmcc CAMSS_CSI2PIX_CLK>,
- <&mmcc CAMSS_CSI2RDI_CLK>,
- <&mmcc CAMSS_CSI3_AHB_CLK>,
- <&mmcc CAMSS_CSI3_CLK>,
- <&mmcc CAMSS_CSI3PHY_CLK>,
- <&mmcc CAMSS_CSI3PIX_CLK>,
- <&mmcc CAMSS_CSI3RDI_CLK>,
- <&mmcc CAMSS_AHB_CLK>,
- <&mmcc CAMSS_VFE0_CLK>,
- <&mmcc CAMSS_CSI_VFE0_CLK>,
- <&mmcc CAMSS_VFE0_AHB_CLK>,
- <&mmcc CAMSS_VFE0_STREAM_CLK>,
- <&mmcc CAMSS_VFE1_CLK>,
- <&mmcc CAMSS_CSI_VFE1_CLK>,
- <&mmcc CAMSS_VFE1_AHB_CLK>,
- <&mmcc CAMSS_VFE1_STREAM_CLK>,
- <&mmcc CAMSS_VFE_AHB_CLK>,
- <&mmcc CAMSS_VFE_AXI_CLK>;
- clock-names = "top_ahb",
- "ispif_ahb",
- "csiphy0_timer",
- "csiphy1_timer",
- "csiphy2_timer",
- "csi0_ahb",
- "csi0",
- "csi0_phy",
- "csi0_pix",
- "csi0_rdi",
- "csi1_ahb",
- "csi1",
- "csi1_phy",
- "csi1_pix",
- "csi1_rdi",
- "csi2_ahb",
- "csi2",
- "csi2_phy",
- "csi2_pix",
- "csi2_rdi",
- "csi3_ahb",
- "csi3",
- "csi3_phy",
- "csi3_pix",
- "csi3_rdi",
- "ahb",
- "vfe0",
- "csi_vfe0",
- "vfe0_ahb",
- "vfe0_stream",
- "vfe1",
- "csi_vfe1",
- "vfe1_ahb",
- "vfe1_stream",
- "vfe_ahb",
- "vfe_axi";
- iommus = <&vfe_smmu 0>,
- <&vfe_smmu 1>,
- <&vfe_smmu 2>,
- <&vfe_smmu 3>;
- status = "disabled";
- ports {
+ in-ports {
#address-cells = <1>;
#size-cells = <0>;
- };
- };
-
- adreno_smmu: iommu@...000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x00b40000 0x10000>;
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
+ port@0 {
+ reg = <0>;
+ apss_funnel1_in0: endpoint {
+ remote-endpoint = <&etm2_out>;
+ };
+ };
- clocks = <&mmcc GPU_AHB_CLK>,
- <&gcc GCC_MMSS_BIMC_GFX_CLK>;
- clock-names = "iface", "bus";
+ port@1 {
+ reg = <1>;
+ apss_funnel1_in1: endpoint {
+ remote-endpoint = <&etm3_out>;
+ };
+ };
+ };
- power-domains = <&mmcc GPU_GDSC>;
+ out-ports {
+ port {
+ apss_funnel1_out: endpoint {
+ remote-endpoint =
+ <&apss_merge_funnel_in1>;
+ };
+ };
+ };
};
- mdp_smmu: iommu@...000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x00d00000 0x10000>;
+ funnel@...0000 {
+ compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
+ reg = <0x3bc0000 0x1000>;
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>;
- #iommu-cells = <1>;
- clocks = <&mmcc SMMU_MDP_AHB_CLK>,
- <&mmcc SMMU_MDP_AXI_CLK>;
- clock-names = "iface", "bus";
+ clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
+ clock-names = "apb_pclk", "atclk";
- power-domains = <&mmcc MDSS_GDSC>;
- };
+ in-ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- lpass_q6_smmu: iommu@...0000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0x01600000 0x20000>;
- #iommu-cells = <1>;
- power-domains = <&gcc HLOS1_VOTE_LPASS_CORE_GDSC>;
+ port@0 {
+ reg = <0>;
+ apss_merge_funnel_in0: endpoint {
+ remote-endpoint =
+ <&apss_funnel0_out>;
+ };
+ };
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 394 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>;
+ port@1 {
+ reg = <1>;
+ apss_merge_funnel_in1: endpoint {
+ remote-endpoint =
+ <&apss_funnel1_out>;
+ };
+ };
+ };
- clocks = <&gcc GCC_HLOS1_VOTE_LPASS_CORE_SMMU_CLK>,
- <&gcc GCC_HLOS1_VOTE_LPASS_ADSP_SMMU_CLK>;
- clock-names = "iface", "bus";
+ out-ports {
+ port {
+ apss_merge_funnel_out: endpoint {
+ remote-endpoint =
+ <&funnel1_in>;
+ };
+ };
+ };
+ };
+ kryocc: clock-controller@...0000 {
+ compatible = "qcom,apcc-msm8996";
+ reg = <0x06400000 0x90000>;
+ #clock-cells = <1>;
};
- agnoc@0 {
- power-domains = <&gcc AGGRE0_NOC_GDSC>;
- compatible = "simple-pm-bus";
+ usb3: usb@...8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x06af8800 0x400>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
- pcie0: pcie@...000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- status = "disabled";
- power-domains = <&gcc PCIE0_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
-
- reg = <0x00600000 0x2000>,
- <0x0c000000 0xf1d>,
- <0x0c000f20 0xa8>,
- <0x0c100000 0x100000>;
- reg-names = "parf", "dbi", "elbi","config";
+ clocks = <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
- phys = <&pciephy_0>;
- phy-names = "pciephy";
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0c200000 0x0c200000 0x0 0x100000>,
- <0x02000000 0x0 0x0c300000 0x0c300000 0x0 0xd00000>;
+ power-domains = <&gcc USB30_GDSC>;
+ status = "disabled";
- interrupts = <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ dwc3@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x06a00000 0xcc00>;
+ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy1>, <&ssusb_phy_0>;
+ phy-names = "usb2-phy", "usb3-phy";
+ };
+ };
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie0_clkreq_default &pcie0_perst_default &pcie0_wake_default>;
- pinctrl-1 = <&pcie0_clkreq_sleep &pcie0_perst_default &pcie0_wake_sleep>;
+ usb3phy: phy@...0000 {
+ compatible = "qcom,msm8996-qmp-usb3-phy";
+ reg = <0x07410000 0x1c4>;
+ #clock-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- linux,pci-domain = <0>;
+ clocks = <&gcc GCC_USB3_PHY_AUX_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_USB3_CLKREF_CLK>;
+ clock-names = "aux", "cfg_ahb", "ref";
- clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
- <&gcc GCC_PCIE_0_AUX_CLK>,
- <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+ resets = <&gcc GCC_USB3_PHY_BCR>,
+ <&gcc GCC_USB3PHY_PHY_BCR>;
+ reset-names = "phy", "common";
+ status = "disabled";
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
+ ssusb_phy_0: lane@...0200 {
+ reg = <0x07410200 0x200>,
+ <0x07410400 0x130>,
+ <0x07410600 0x1a8>;
+ #phy-cells = <0>;
+ clock-output-names = "usb3_phy_pipe_clk_src";
+ clocks = <&gcc GCC_USB3_PHY_PIPE_CLK>;
+ clock-names = "pipe0";
};
+ };
- pcie1: pcie@...000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- power-domains = <&gcc PCIE1_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
+ hsusb_phy1: phy@...1000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x07411000 0x180>;
+ #phy-cells = <0>;
- status = "disabled";
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX1_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
- reg = <0x00608000 0x2000>,
- <0x0d000000 0xf1d>,
- <0x0d000f20 0xa8>,
- <0x0d100000 0x100000>;
+ resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+ nvmem-cells = <&qusb2p_hstx_trim>;
+ status = "disabled";
+ };
- reg-names = "parf", "dbi", "elbi","config";
+ hsusb_phy2: phy@...2000 {
+ compatible = "qcom,msm8996-qusb2-phy";
+ reg = <0x07412000 0x180>;
+ #phy-cells = <0>;
- phys = <&pciephy_1>;
- phy-names = "pciephy";
+ clocks = <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
+ <&gcc GCC_RX2_USB2_CLKREF_CLK>;
+ clock-names = "cfg_ahb", "ref";
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0d200000 0x0d200000 0x0 0x100000>,
- <0x02000000 0x0 0x0d300000 0x0d300000 0x0 0xd00000>;
+ resets = <&gcc GCC_QUSB2PHY_SEC_BCR>;
+ nvmem-cells = <&qusb2s_hstx_trim>;
+ status = "disabled";
+ };
- interrupts = <GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ sdhc2: sdhci@...4900 {
+ status = "disabled";
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0x074a4900 0x314>, <0x074a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie1_clkreq_default &pcie1_perst_default &pcie1_wake_default>;
- pinctrl-1 = <&pcie1_clkreq_sleep &pcie1_perst_default &pcie1_wake_sleep>;
+ interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>,
+ <0 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
- linux,pci-domain = <1>;
+ clock-names = "iface", "core", "xo";
+ clocks = <&gcc GCC_SDCC2_AHB_CLK>,
+ <&gcc GCC_SDCC2_APPS_CLK>,
+ <&xo_board>;
+ bus-width = <4>;
+ };
+
+ blsp1_uart1: serial@...0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x07570000 0x1000>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
+
+ blsp1_spi0: spi@...5000 {
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x07575000 0x600>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP1_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_spi0_default>;
+ pinctrl-1 = <&blsp1_spi0_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
- clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
- <&gcc GCC_PCIE_1_AUX_CLK>,
- <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_1_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_1_SLV_AXI_CLK>;
+ blsp1_i2c2: i2c@...7000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x07577000 0x1000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_i2c2_default>;
+ pinctrl-1 = <&blsp1_i2c2_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
- };
+ blsp2_uart1: serial@...0000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x075b0000 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
- pcie2: pcie@...000 {
- compatible = "qcom,pcie-msm8996", "snps,dw-pcie";
- power-domains = <&gcc PCIE2_GDSC>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- status = "disabled";
- reg = <0x00610000 0x2000>,
- <0x0e000000 0xf1d>,
- <0x0e000f20 0xa8>,
- <0x0e100000 0x100000>;
+ blsp2_uart2: serial@...1000 {
+ compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ reg = <0x075b1000 0x1000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_UART3_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ status = "disabled";
+ };
- reg-names = "parf", "dbi", "elbi","config";
+ blsp2_i2c0: i2c@...5000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x075b5000 0x1000>;
+ interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c0_default>;
+ pinctrl-1 = <&blsp2_i2c0_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
- phys = <&pciephy_2>;
- phy-names = "pciephy";
+ blsp2_i2c1: i2c@...6000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0x075b6000 0x1000>;
+ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_AHB_CLK>,
+ <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_i2c1_default>;
+ pinctrl-1 = <&blsp2_i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
- #address-cells = <3>;
- #size-cells = <2>;
- ranges = <0x01000000 0x0 0x0e200000 0x0e200000 0x0 0x100000>,
- <0x02000000 0x0 0x0e300000 0x0e300000 0x0 0x1d00000>;
+ blsp2_spi5: spi@...a000{
+ compatible = "qcom,spi-qup-v2.2.1";
+ reg = <0x075ba000 0x600>;
+ interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP2_QUP6_SPI_APPS_CLK>,
+ <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_spi5_default>;
+ pinctrl-1 = <&blsp2_spi5_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
- device_type = "pci";
+ usb2: usb@...8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0x076f8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
- interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+ clocks = <&gcc GCC_PERIPH_NOC_USB20_AHB_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>,
+ <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_SLEEP_CLK>,
+ <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>;
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&pcie2_clkreq_default &pcie2_perst_default &pcie2_wake_default>;
- pinctrl-1 = <&pcie2_clkreq_sleep &pcie2_perst_default &pcie2_wake_sleep >;
+ assigned-clocks = <&gcc GCC_USB20_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB20_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <60000000>;
- linux,pci-domain = <2>;
- clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
- <&gcc GCC_PCIE_2_AUX_CLK>,
- <&gcc GCC_PCIE_2_CFG_AHB_CLK>,
- <&gcc GCC_PCIE_2_MSTR_AXI_CLK>,
- <&gcc GCC_PCIE_2_SLV_AXI_CLK>;
+ power-domains = <&gcc USB30_GDSC>;
+ status = "disabled";
- clock-names = "pipe",
- "aux",
- "cfg",
- "bus_master",
- "bus_slave";
+ dwc3@...0000 {
+ compatible = "snps,dwc3";
+ reg = <0x07600000 0xcc00>;
+ interrupts = <0 138 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&hsusb_phy2>;
+ phy-names = "usb2-phy";
};
};
- slimbam:dma@...4000
- {
+ slimbam: dma@...4000 {
compatible = "qcom,bam-v1.7.0";
qcom,controlled-remotely;
reg = <0x09184000 0x32000>;
@@ -1935,459 +1945,445 @@
reg = <0x091c0000 0x2C000>;
reg-names = "ctrl";
interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
- dmas = <&slimbam 3>, <&slimbam 4>,
- <&slimbam 5>, <&slimbam 6>;
- dma-names = "rx", "tx", "tx2", "rx2";
- #address-cells = <1>;
- #size-cells = <0>;
- ngd@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- tasha_ifd: tas-ifd {
- compatible = "slim217,1a0";
- reg = <0 0>;
- };
-
- wcd9335: codec@1{
- pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
- pinctrl-names = "default";
-
- compatible = "slim217,1a0";
- reg = <1 0>;
-
- interrupt-parent = <&msmgpio>;
- interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
- <53 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "intr1", "intr2";
- interrupt-controller;
- #interrupt-cells = <1>;
- reset-gpios = <&msmgpio 64 0>;
-
- slim-ifc-dev = <&tasha_ifd>;
-
- #sound-dai-cells = <1>;
- };
- };
- };
-
- gpu@...000 {
- compatible = "qcom,adreno-530.2", "qcom,adreno";
- #stream-id-cells = <16>;
-
- reg = <0x00b00000 0x3f000>;
- reg-names = "kgsl_3d0_reg_memory";
-
- interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>;
-
- clocks = <&mmcc GPU_GX_GFX3D_CLK>,
- <&mmcc GPU_AHB_CLK>,
- <&mmcc GPU_GX_RBBMTIMER_CLK>,
- <&gcc GCC_BIMC_GFX_CLK>,
- <&gcc GCC_MMSS_BIMC_GFX_CLK>;
-
- clock-names = "core",
- "iface",
- "rbbmtimer",
- "mem",
- "mem_iface";
-
- power-domains = <&mmcc GPU_GDSC>;
- iommus = <&adreno_smmu 0>;
-
- nvmem-cells = <&gpu_speed_bin>;
- nvmem-cell-names = "speed_bin";
-
- qcom,gpu-quirk-two-pass-use-wfi;
- qcom,gpu-quirk-fault-detect-mask;
-
- operating-points-v2 = <&gpu_opp_table>;
-
- gpu_opp_table: opp-table {
- compatible ="operating-points-v2";
-
- /*
- * 624Mhz and 560Mhz are only available on speed
- * bin (1 << 0). All the rest are available on
- * all bins of the hardware
- */
- opp-624000000 {
- opp-hz = /bits/ 64 <624000000>;
- opp-supported-hw = <0x01>;
- };
- opp-560000000 {
- opp-hz = /bits/ 64 <560000000>;
- opp-supported-hw = <0x01>;
- };
- opp-510000000 {
- opp-hz = /bits/ 64 <510000000>;
- opp-supported-hw = <0xFF>;
- };
- opp-401800000 {
- opp-hz = /bits/ 64 <401800000>;
- opp-supported-hw = <0xFF>;
- };
- opp-315000000 {
- opp-hz = /bits/ 64 <315000000>;
- opp-supported-hw = <0xFF>;
- };
- opp-214000000 {
- opp-hz = /bits/ 64 <214000000>;
- opp-supported-hw = <0xFF>;
- };
- opp-133000000 {
- opp-hz = /bits/ 64 <133000000>;
- opp-supported-hw = <0xFF>;
+ dmas = <&slimbam 3>, <&slimbam 4>,
+ <&slimbam 5>, <&slimbam 6>;
+ dma-names = "rx", "tx", "tx2", "rx2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ngd@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ tasha_ifd: tas-ifd {
+ compatible = "slim217,1a0";
+ reg = <0 0>;
};
- };
- zap-shader {
- memory-region = <&zap_shader_region>;
- };
- };
+ wcd9335: codec@1{
+ pinctrl-0 = <&cdc_reset_active &wcd_intr_default>;
+ pinctrl-names = "default";
- mdss: mdss@...000 {
- compatible = "qcom,mdss";
+ compatible = "slim217,1a0";
+ reg = <1 0>;
- reg = <0x00900000 0x1000>,
- <0x009b0000 0x1040>,
- <0x009b8000 0x1040>;
- reg-names = "mdss_phys",
- "vbif_phys",
- "vbif_nrt_phys";
+ interrupt-parent = <&msmgpio>;
+ interrupts = <54 IRQ_TYPE_LEVEL_HIGH>,
+ <53 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "intr1", "intr2";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reset-gpios = <&msmgpio 64 0>;
- power-domains = <&mmcc MDSS_GDSC>;
- interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ slim-ifc-dev = <&tasha_ifd>;
- interrupt-controller;
- #interrupt-cells = <1>;
+ #sound-dai-cells = <1>;
+ };
+ };
+ };
- clocks = <&mmcc MDSS_AHB_CLK>;
- clock-names = "iface";
+ adsp_pil: remoteproc@...0000 {
+ compatible = "qcom,msm8996-adsp-pil";
+ reg = <0x09300000 0x80000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
+ interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+ <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "wdog", "fatal", "ready",
+ "handover", "stop-ack";
- mdp: mdp@...000 {
- compatible = "qcom,mdp5";
- reg = <0x00901000 0x90000>;
- reg-names = "mdp_phys";
+ clocks = <&xo_board>;
+ clock-names = "xo";
- interrupt-parent = <&mdss>;
- interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+ memory-region = <&adsp_region>;
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_AXI_CLK>,
- <&mmcc MDSS_MDP_CLK>,
- <&mmcc SMMU_MDP_AXI_CLK>,
- <&mmcc MDSS_VSYNC_CLK>;
- clock-names = "iface",
- "bus",
- "core",
- "iommu",
- "vsync";
+ qcom,smem-states = <&smp2p_adsp_out 0>;
+ qcom,smem-state-names = "stop";
- iommus = <&mdp_smmu 0>;
+ smd-edge {
+ interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
- ports {
+ label = "lpass";
+ mboxes = <&apcs_glb 8>;
+ qcom,smd-edge = <1>;
+ qcom,remote-pid = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ apr {
+ power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
+ compatible = "qcom,apr-v2";
+ qcom,smd-channels = "apr_audio_svc";
+ qcom,apr-domain = <APR_DOMAIN_ADSP>;
#address-cells = <1>;
#size-cells = <0>;
- port@0 {
- reg = <0>;
- mdp5_intf3_out: endpoint {
- remote-endpoint = <&hdmi_in>;
+ q6core {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ };
+
+ q6afe: q6afe {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ hdmi@1 {
+ reg = <1>;
+ };
};
};
- };
- };
- hdmi: hdmi-tx@...000 {
- compatible = "qcom,hdmi-tx-8996";
- reg = <0x009a0000 0x50c>,
- <0x00070000 0x6158>,
- <0x009e0000 0xfff>;
- reg-names = "core_physical",
- "qfprom_physical",
- "hdcp_physical";
+ q6asm: q6asm {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #sound-dai-cells = <1>;
+ iommus = <&lpass_q6_smmu 1>;
+ };
+ };
- interrupt-parent = <&mdss>;
- interrupts = <8 IRQ_TYPE_LEVEL_HIGH>;
+ q6adm: q6adm {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
- clocks = <&mmcc MDSS_MDP_CLK>,
- <&mmcc MDSS_AHB_CLK>,
- <&mmcc MDSS_HDMI_CLK>,
- <&mmcc MDSS_HDMI_AHB_CLK>,
- <&mmcc MDSS_EXTPCLK_CLK>;
- clock-names =
- "mdp_core",
- "iface",
- "core",
- "alt_iface",
- "extp";
+ };
+ };
- phys = <&hdmi_phy>;
- phy-names = "hdmi_phy";
- #sound-dai-cells = <1>;
+ apcs_glb: mailbox@...0000 {
+ compatible = "qcom,msm8996-apcs-hmss-global";
+ reg = <0x09820000 0x1000>;
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ #mbox-cells = <1>;
+ };
- port@0 {
- reg = <0>;
- hdmi_in: endpoint {
- remote-endpoint = <&mdp5_intf3_out>;
- };
- };
- };
+ timer@...0000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x09840000 0x1000>;
+ clock-frequency = <19200000>;
+
+ frame@...0000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09850000 0x1000>,
+ <0x09860000 0x1000>;
};
- hdmi_phy: hdmi-phy@...600 {
- #phy-cells = <0>;
- compatible = "qcom,hdmi-phy-8996";
- reg = <0x009a0600 0x1c4>,
- <0x009a0a00 0x124>,
- <0x009a0c00 0x124>,
- <0x009a0e00 0x124>,
- <0x009a1000 0x124>,
- <0x009a1200 0x0c8>;
- reg-names = "hdmi_pll",
- "hdmi_tx_l0",
- "hdmi_tx_l1",
- "hdmi_tx_l2",
- "hdmi_tx_l3",
- "hdmi_phy";
+ frame@...0000 {
+ frame-number = <1>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09870000 0x1000>;
+ status = "disabled";
+ };
- clocks = <&mmcc MDSS_AHB_CLK>,
- <&gcc GCC_HDMI_CLKREF_CLK>;
- clock-names = "iface",
- "ref";
+ frame@...0000 {
+ frame-number = <2>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09880000 0x1000>;
+ status = "disabled";
};
- };
- venus_smmu: arm,smmu-venus@...000 {
- compatible = "qcom,msm8996-smmu-v2", "qcom,smmu-v2";
- reg = <0xd40000 0x20000>;
- #global-interrupts = <1>;
- interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc MMAGIC_VIDEO_GDSC>;
- clocks = <&mmcc SMMU_VIDEO_AHB_CLK>,
- <&mmcc SMMU_VIDEO_AXI_CLK>;
- clock-names = "iface", "bus";
- #iommu-cells = <1>;
- status = "okay";
- };
+ frame@...0000 {
+ frame-number = <3>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x09890000 0x1000>;
+ status = "disabled";
+ };
- video-codec@...000 {
- compatible = "qcom,msm8996-venus";
- reg = <0x00c00000 0xff000>;
- interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
- power-domains = <&mmcc VENUS_GDSC>;
- clocks = <&mmcc VIDEO_CORE_CLK>,
- <&mmcc VIDEO_AHB_CLK>,
- <&mmcc VIDEO_AXI_CLK>,
- <&mmcc VIDEO_MAXI_CLK>;
- clock-names = "core", "iface", "bus", "mbus";
- iommus = <&venus_smmu 0x00>,
- <&venus_smmu 0x01>,
- <&venus_smmu 0x0a>,
- <&venus_smmu 0x07>,
- <&venus_smmu 0x0e>,
- <&venus_smmu 0x0f>,
- <&venus_smmu 0x08>,
- <&venus_smmu 0x09>,
- <&venus_smmu 0x0b>,
- <&venus_smmu 0x0c>,
- <&venus_smmu 0x0d>,
- <&venus_smmu 0x10>,
- <&venus_smmu 0x11>,
- <&venus_smmu 0x21>,
- <&venus_smmu 0x28>,
- <&venus_smmu 0x29>,
- <&venus_smmu 0x2b>,
- <&venus_smmu 0x2c>,
- <&venus_smmu 0x2d>,
- <&venus_smmu 0x31>;
- memory-region = <&venus_region>;
- status = "okay";
+ frame@...0000 {
+ frame-number = <4>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x098a0000 0x1000>;
+ status = "disabled";
+ };
- video-decoder {
- compatible = "venus-decoder";
- clocks = <&mmcc VIDEO_SUBCORE0_CLK>;
- clock-names = "core";
- power-domains = <&mmcc VENUS_CORE0_GDSC>;
+ frame@...0000 {
+ frame-number = <5>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x098b0000 0x1000>;
+ status = "disabled";
};
- video-encoder {
- compatible = "venus-encoder";
- clocks = <&mmcc VIDEO_SUBCORE1_CLK>;
- clock-names = "core";
- power-domains = <&mmcc VENUS_CORE1_GDSC>;
+ frame@...0000 {
+ frame-number = <6>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x098c0000 0x1000>;
+ status = "disabled";
};
};
+
+ intc: interrupt-controller@...0000 {
+ compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ #redistributor-regions = <1>;
+ redistributor-stride = <0x0 0x40000>;
+ reg = <0x09bc0000 0x10000>,
+ <0x09c00000 0x100000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
sound: sound {
};
- adsp-pil {
- compatible = "qcom,msm8996-adsp-pil";
+ thermal-zones {
+ cpu0-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
- <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
- interrupt-names = "wdog", "fatal", "ready",
- "handover", "stop-ack";
+ thermal-sensors = <&tsens0 3>;
- clocks = <&xo_board>;
- clock-names = "xo";
+ trips {
+ cpu0_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- memory-region = <&adsp_region>;
+ cpu0_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
- qcom,smem-states = <&adsp_smp2p_out 0>;
- qcom,smem-state-names = "stop";
+ cpu1-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- smd-edge {
- interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens0 5>;
- label = "lpass";
- mboxes = <&apcs_glb 8>;
- qcom,smd-edge = <1>;
- qcom,remote-pid = <2>;
- #address-cells = <1>;
- #size-cells = <0>;
- apr {
- power-domains = <&gcc HLOS1_VOTE_LPASS_ADSP_GDSC>;
- compatible = "qcom,apr-v2";
- qcom,smd-channels = "apr_audio_svc";
- qcom,apr-domain = <APR_DOMAIN_ADSP>;
- #address-cells = <1>;
- #size-cells = <0>;
+ trips {
+ cpu1_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
- q6core {
- reg = <APR_SVC_ADSP_CORE>;
- compatible = "qcom,q6core";
- };
-
- q6afe: q6afe {
- compatible = "qcom,q6afe";
- reg = <APR_SVC_AFE>;
- q6afedai: dais {
- compatible = "qcom,q6afe-dais";
- #address-cells = <1>;
- #size-cells = <0>;
- #sound-dai-cells = <1>;
- hdmi@1 {
- reg = <1>;
- };
- };
+ cpu1_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
};
+ };
+ };
- q6asm: q6asm {
- compatible = "qcom,q6asm";
- reg = <APR_SVC_ASM>;
- q6asmdai: dais {
- compatible = "qcom,q6asm-dais";
- #sound-dai-cells = <1>;
- iommus = <&lpass_q6_smmu 1>;
- };
+ cpu2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ cpu2_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
};
- q6adm: q6adm {
- compatible = "qcom,q6adm";
- reg = <APR_SVC_ADM>;
- q6routing: routing {
- compatible = "qcom,q6adm-routing";
- #sound-dai-cells = <0>;
- };
+ cpu2_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
};
};
+ };
+
+ cpu3-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ cpu3_alert0: trip-point@0 {
+ temperature = <75000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+ cpu3_crit: cpu_crit {
+ temperature = <110000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
};
- };
- adsp-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <443>, <429>;
+ gpu-thermal-top {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts = <0 158 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens1 6>;
- mboxes = <&apcs_glb 10>;
+ trips {
+ gpu1_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <2>;
+ gpu-thermal-bottom {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- adsp_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
+ thermal-sensors = <&tsens1 7>;
+
+ trips {
+ gpu2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- adsp_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
+ m4m-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ m4m_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- };
- modem-smp2p {
- compatible = "qcom,smp2p";
- qcom,smem = <435>, <428>;
+ l3-or-venus-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts = <GIC_SPI 451 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens0 2>;
- mboxes = <&apcs_glb 14>;
+ trips {
+ l3_or_venus_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <1>;
+ cluster0-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- modem_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ cluster0_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- modem_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
+ cluster1-l2-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupt-controller;
- #interrupt-cells = <2>;
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ cluster1_l2_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- };
- smp2p-slpi {
- compatible = "qcom,smp2p";
- qcom,smem = <481>, <430>;
+ camera-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>;
+ thermal-sensors = <&tsens1 1>;
- mboxes = <&apcs_glb 26>;
+ trips {
+ camera_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
- qcom,local-pid = <0>;
- qcom,remote-pid = <3>;
+ q6-dsp-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
- slpi_smp2p_in: slave-kernel {
- qcom,entry-name = "slave-kernel";
- interrupt-controller;
- #interrupt-cells = <2>;
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ q6_dsp_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
- slpi_smp2p_out: master-kernel {
- qcom,entry-name = "master-kernel";
- #qcom,smem-state-cells = <1>;
+ mem-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ mem_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
+ };
+
+ modemtx-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ modemtx_alert0: trip-point@0 {
+ temperature = <90000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+ };
};
};
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
};
#include "msm8996-pins.dtsi"
--
2.23.0
Powered by blists - more mailing lists