| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <6017183f24b5f588f25ac175f6ebfa7a@codeaurora.org>
Date: Tue, 22 Oct 2019 12:50:59 +0530
From: kgunda@...eaurora.org
To: Daniel Thompson <daniel.thompson@...aro.org>
Cc: bjorn.andersson@...aro.org, jingoohan1@...il.com,
lee.jones@...aro.org, b.zolnierkie@...sung.com,
dri-devel@...ts.freedesktop.org, jacek.anaszewski@...il.com,
pavel@....cz, robh+dt@...nel.org, mark.rutland@....com,
linux-leds@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Andy Gross <agross@...nel.org>,
linux-arm-msm@...r.kernel.org, linux-fbdev@...r.kernel.org,
linux-arm-msm-owner@...r.kernel.org
Subject: Re: [PATCH V8 4/6] backlight: qcom-wled: Add support for WLED4
peripheral.
On 2019-10-21 15:49, Daniel Thompson wrote:
> On Fri, Oct 18, 2019 at 06:03:27PM +0530, Kiran Gunda wrote:
>> WLED4 peripheral is present on some PMICs like pmi8998 and
>> pm660l. It has a different register map and configurations
>> are also different. Add support for it.
>>
>> Signed-off-by: Kiran Gunda <kgunda@...eaurora.org>
>> Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
>
> Reviewed-by: Daniel Thompson <daniel.thompson@...aro.org>
>
Thanks !
>> ---
>> drivers/video/backlight/qcom-wled.c | 255
>> +++++++++++++++++++++++++++++++++++-
>> 1 file changed, 253 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/video/backlight/qcom-wled.c
>> b/drivers/video/backlight/qcom-wled.c
>> index 45eeda4..5386ca9 100644
>> --- a/drivers/video/backlight/qcom-wled.c
>> +++ b/drivers/video/backlight/qcom-wled.c
>> @@ -17,7 +17,7 @@
>>
>> #define WLED3_SINK_REG_BRIGHT_MAX 0xFFF
>>
>> -/* WLED3 control registers */
>> +/* WLED3/WLED4 control registers */
>> #define WLED3_CTRL_REG_MOD_EN 0x46
>> #define WLED3_CTRL_REG_MOD_EN_MASK BIT(7)
>> #define WLED3_CTRL_REG_MOD_EN_SHIFT 7
>> @@ -31,7 +31,7 @@
>> #define WLED3_CTRL_REG_ILIMIT 0x4e
>> #define WLED3_CTRL_REG_ILIMIT_MASK GENMASK(2, 0)
>>
>> -/* WLED3 sink registers */
>> +/* WLED3/WLED4 sink registers */
>> #define WLED3_SINK_REG_SYNC 0x47
>> #define WLED3_SINK_REG_SYNC_CLEAR 0x00
>>
>> @@ -56,6 +56,28 @@
>> #define WLED3_SINK_REG_STR_CABC(n) (0x66 + (n * 0x10))
>> #define WLED3_SINK_REG_STR_CABC_MASK BIT(7)
>>
>> +/* WLED4 specific sink registers */
>> +#define WLED4_SINK_REG_CURR_SINK 0x46
>> +#define WLED4_SINK_REG_CURR_SINK_MASK GENMASK(7, 4)
>> +#define WLED4_SINK_REG_CURR_SINK_SHFT 4
>> +
>> +/* WLED4 specific per-'string' registers below */
>> +#define WLED4_SINK_REG_STR_MOD_EN(n) (0x50 + (n * 0x10))
>> +#define WLED4_SINK_REG_STR_MOD_MASK BIT(7)
>> +
>> +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR(n) (0x52 + (n * 0x10))
>> +#define WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK GENMASK(3, 0)
>> +
>> +#define WLED4_SINK_REG_STR_MOD_SRC(n) (0x53 + (n * 0x10))
>> +#define WLED4_SINK_REG_STR_MOD_SRC_MASK BIT(0)
>> +#define WLED4_SINK_REG_STR_MOD_SRC_INT 0x00
>> +#define WLED4_SINK_REG_STR_MOD_SRC_EXT 0x01
>> +
>> +#define WLED4_SINK_REG_STR_CABC(n) (0x56 + (n * 0x10))
>> +#define WLED4_SINK_REG_STR_CABC_MASK BIT(7)
>> +
>> +#define WLED4_SINK_REG_BRIGHT(n) (0x57 + (n * 0x10))
>> +
>> struct wled_var_cfg {
>> const u32 *values;
>> u32 (*fn)(u32);
>> @@ -90,6 +112,7 @@ struct wled {
>> struct device *dev;
>> struct regmap *regmap;
>> u16 ctrl_addr;
>> + u16 sink_addr;
>> u16 max_string_count;
>> u32 brightness;
>> u32 max_brightness;
>> @@ -116,6 +139,29 @@ static int wled3_set_brightness(struct wled
>> *wled, u16 brightness)
>> return 0;
>> }
>>
>> +static int wled4_set_brightness(struct wled *wled, u16 brightness)
>> +{
>> + int rc, i;
>> + u16 low_limit = wled->max_brightness * 4 / 1000;
>> + u8 v[2];
>> +
>> + /* WLED4's lower limit of operation is 0.4% */
>> + if (brightness > 0 && brightness < low_limit)
>> + brightness = low_limit;
>> +
>> + v[0] = brightness & 0xff;
>> + v[1] = (brightness >> 8) & 0xf;
>> +
>> + for (i = 0; i < wled->cfg.num_strings; ++i) {
>> + rc = regmap_bulk_write(wled->regmap, wled->sink_addr +
>> + WLED4_SINK_REG_BRIGHT(i), v, 2);
>> + if (rc < 0)
>> + return rc;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> static int wled_module_enable(struct wled *wled, int val)
>> {
>> int rc;
>> @@ -267,6 +313,120 @@ static int wled3_setup(struct wled *wled)
>> .enabled_strings = {0, 1, 2, 3},
>> };
>>
>> +static int wled4_setup(struct wled *wled)
>> +{
>> + int rc, temp, i, j;
>> + u16 addr;
>> + u8 sink_en = 0;
>> + u32 sink_cfg = 0;
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->ctrl_addr + WLED3_CTRL_REG_OVP,
>> + WLED3_CTRL_REG_OVP_MASK, wled->cfg.ovp);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->ctrl_addr + WLED3_CTRL_REG_ILIMIT,
>> + WLED3_CTRL_REG_ILIMIT_MASK,
>> + wled->cfg.boost_i_limit);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->ctrl_addr + WLED3_CTRL_REG_FREQ,
>> + WLED3_CTRL_REG_FREQ_MASK,
>> + wled->cfg.switch_freq);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = regmap_read(wled->regmap, wled->sink_addr +
>> + WLED4_SINK_REG_CURR_SINK, &sink_cfg);
>> + if (rc < 0)
>> + return rc;
>> +
>> + for (i = 0; i < wled->cfg.num_strings; i++) {
>> + j = wled->cfg.enabled_strings[i];
>> + temp = j + WLED4_SINK_REG_CURR_SINK_SHFT;
>> + sink_en |= 1 << temp;
>> + }
>> +
>> + if (sink_cfg == sink_en)
>> + return 0;
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
>> + WLED4_SINK_REG_CURR_SINK_MASK, 0);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
>> + WLED3_CTRL_REG_MOD_EN,
>> + WLED3_CTRL_REG_MOD_EN_MASK, 0);
>> + if (rc < 0)
>> + return rc;
>> +
>> + /* Per sink/string configuration */
>> + for (i = 0; i < wled->cfg.num_strings; i++) {
>> + j = wled->cfg.enabled_strings[i];
>> +
>> + addr = wled->sink_addr +
>> + WLED4_SINK_REG_STR_MOD_EN(j);
>> + rc = regmap_update_bits(wled->regmap, addr,
>> + WLED4_SINK_REG_STR_MOD_MASK,
>> + WLED4_SINK_REG_STR_MOD_MASK);
>> + if (rc < 0)
>> + return rc;
>> +
>> + addr = wled->sink_addr +
>> + WLED4_SINK_REG_STR_FULL_SCALE_CURR(j);
>> + rc = regmap_update_bits(wled->regmap, addr,
>> + WLED4_SINK_REG_STR_FULL_SCALE_CURR_MASK,
>> + wled->cfg.string_i_limit);
>> + if (rc < 0)
>> + return rc;
>> +
>> + addr = wled->sink_addr +
>> + WLED4_SINK_REG_STR_CABC(j);
>> + rc = regmap_update_bits(wled->regmap, addr,
>> + WLED4_SINK_REG_STR_CABC_MASK,
>> + wled->cfg.cabc ?
>> + WLED4_SINK_REG_STR_CABC_MASK : 0);
>> + if (rc < 0)
>> + return rc;
>> + }
>> +
>> + rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
>> + WLED3_CTRL_REG_MOD_EN,
>> + WLED3_CTRL_REG_MOD_EN_MASK,
>> + WLED3_CTRL_REG_MOD_EN_MASK);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = regmap_update_bits(wled->regmap,
>> + wled->sink_addr + WLED4_SINK_REG_CURR_SINK,
>> + WLED4_SINK_REG_CURR_SINK_MASK, sink_en);
>> + if (rc < 0)
>> + return rc;
>> +
>> + rc = wled_sync_toggle(wled);
>> + if (rc < 0) {
>> + dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc);
>> + return rc;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static const struct wled_config wled4_config_defaults = {
>> + .boost_i_limit = 4,
>> + .string_i_limit = 10,
>> + .ovp = 1,
>> + .num_strings = 4,
>> + .switch_freq = 11,
>> + .cabc = false,
>> +};
>> +
>> static const u32 wled3_boost_i_limit_values[] = {
>> 105, 385, 525, 805, 980, 1260, 1400, 1680,
>> };
>> @@ -276,6 +436,15 @@ static int wled3_setup(struct wled *wled)
>> .size = ARRAY_SIZE(wled3_boost_i_limit_values),
>> };
>>
>> +static const u32 wled4_boost_i_limit_values[] = {
>> + 105, 280, 450, 620, 970, 1150, 1300, 1500,
>> +};
>> +
>> +static const struct wled_var_cfg wled4_boost_i_limit_cfg = {
>> + .values = wled4_boost_i_limit_values,
>> + .size = ARRAY_SIZE(wled4_boost_i_limit_values),
>> +};
>> +
>> static const u32 wled3_ovp_values[] = {
>> 35, 32, 29, 27,
>> };
>> @@ -285,6 +454,15 @@ static int wled3_setup(struct wled *wled)
>> .size = ARRAY_SIZE(wled3_ovp_values),
>> };
>>
>> +static const u32 wled4_ovp_values[] = {
>> + 31100, 29600, 19600, 18100,
>> +};
>> +
>> +static const struct wled_var_cfg wled4_ovp_cfg = {
>> + .values = wled4_ovp_values,
>> + .size = ARRAY_SIZE(wled4_ovp_values),
>> +};
>> +
>> static u32 wled3_num_strings_values_fn(u32 idx)
>> {
>> return idx + 1;
>> @@ -295,6 +473,11 @@ static u32 wled3_num_strings_values_fn(u32 idx)
>> .size = 3,
>> };
>>
>> +static const struct wled_var_cfg wled4_num_strings_cfg = {
>> + .fn = wled3_num_strings_values_fn,
>> + .size = 4,
>> +};
>> +
>> static u32 wled3_switch_freq_values_fn(u32 idx)
>> {
>> return 19200 / (2 * (1 + idx));
>> @@ -309,10 +492,24 @@ static u32 wled3_switch_freq_values_fn(u32 idx)
>> .size = 26,
>> };
>>
>> +static const u32 wled4_string_i_limit_values[] = {
>> + 0, 2500, 5000, 7500, 10000, 12500, 15000, 17500, 20000,
>> + 22500, 25000, 27500, 30000,
>> +};
>> +
>> +static const struct wled_var_cfg wled4_string_i_limit_cfg = {
>> + .values = wled4_string_i_limit_values,
>> + .size = ARRAY_SIZE(wled4_string_i_limit_values),
>> +};
>> +
>> static const struct wled_var_cfg wled3_string_cfg = {
>> .size = 8,
>> };
>>
>> +static const struct wled_var_cfg wled4_string_cfg = {
>> + .size = 16,
>> +};
>> +
>> static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx)
>> {
>> if (idx >= cfg->size)
>> @@ -361,6 +558,34 @@ static int wled_configure(struct wled *wled, int
>> version)
>> },
>> };
>>
>> + const struct wled_u32_opts wled4_opts[] = {
>> + {
>> + .name = "qcom,current-boost-limit",
>> + .val_ptr = &cfg->boost_i_limit,
>> + .cfg = &wled4_boost_i_limit_cfg,
>> + },
>> + {
>> + .name = "qcom,current-limit-microamp",
>> + .val_ptr = &cfg->string_i_limit,
>> + .cfg = &wled4_string_i_limit_cfg,
>> + },
>> + {
>> + .name = "qcom,ovp-millivolt",
>> + .val_ptr = &cfg->ovp,
>> + .cfg = &wled4_ovp_cfg,
>> + },
>> + {
>> + .name = "qcom,switching-freq",
>> + .val_ptr = &cfg->switch_freq,
>> + .cfg = &wled3_switch_freq_cfg,
>> + },
>> + {
>> + .name = "qcom,num-strings",
>> + .val_ptr = &cfg->num_strings,
>> + .cfg = &wled4_num_strings_cfg,
>> + },
>> + };
>> +
>> const struct wled_bool_opts bool_opts[] = {
>> { "qcom,cs-out", &cfg->cs_out_en, },
>> { "qcom,ext-gen", &cfg->ext_gen, },
>> @@ -385,6 +610,22 @@ static int wled_configure(struct wled *wled, int
>> version)
>> *cfg = wled3_config_defaults;
>> wled->wled_set_brightness = wled3_set_brightness;
>> wled->max_string_count = 3;
>> + wled->sink_addr = wled->ctrl_addr;
>> + break;
>> +
>> + case 4:
>> + u32_opts = wled4_opts;
>> + size = ARRAY_SIZE(wled4_opts);
>> + *cfg = wled4_config_defaults;
>> + wled->wled_set_brightness = wled4_set_brightness;
>> + wled->max_string_count = 4;
>> +
>> + prop_addr = of_get_address(dev->of_node, 1, NULL, NULL);
>> + if (!prop_addr) {
>> + dev_err(wled->dev, "invalid IO resources\n");
>> + return -EINVAL;
>> + }
>> + wled->sink_addr = be32_to_cpu(*prop_addr);
>> break;
>>
>> default:
>> @@ -483,6 +724,14 @@ static int wled_probe(struct platform_device
>> *pdev)
>> }
>> break;
>>
>> + case 4:
>> + rc = wled4_setup(wled);
>> + if (rc) {
>> + dev_err(&pdev->dev, "wled4_setup failed\n");
>> + return rc;
>> + }
>> + break;
>> +
>> default:
>> dev_err(wled->dev, "Invalid WLED version\n");
>> break;
>> @@ -503,6 +752,8 @@ static int wled_probe(struct platform_device
>> *pdev)
>>
>> static const struct of_device_id wled_match_table[] = {
>> { .compatible = "qcom,pm8941-wled", .data = (void *)3 },
>> + { .compatible = "qcom,pmi8998-wled", .data = (void *)4 },
>> + { .compatible = "qcom,pm660l-wled", .data = (void *)4 },
>> {}
>> };
>> MODULE_DEVICE_TABLE(of, wled_match_table);
>> --
>> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora
>> Forum,
>> a Linux Foundation Collaborative Project
>>
Powered by blists - more mailing lists