| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <21b32ac3-7cb1-743b-5aa2-9a07c7b61800@collabora.com>
Date: Tue, 22 Oct 2019 11:39:26 +0200
From: Enric Balletbo i Serra <enric.balletbo@...labora.com>
To: Jonathan Cameron <jic23@...nel.org>,
Gwendal Grignou <gwendal@...omium.org>
Cc: briannorris@...omium.org, knaack.h@....de, lars@...afoo.de,
pmeerw@...erw.net, lee.jones@...aro.org, bleung@...omium.org,
dianders@...omium.org, groeck@...omium.org,
fabien.lahoudere@...labora.com, linux-kernel@...r.kernel.org,
linux-iio@...r.kernel.org
Subject: Re: [PATCH v2 04/18] platform/mfd:iio: cros_ec: Register sensor
through sensorhub
Hi Gwendal,
On 21/10/19 18:00, Jonathan Cameron wrote:
> On Sun, 20 Oct 2019 22:53:49 -0700
> Gwendal Grignou <gwendal@...omium.org> wrote:
>
>> - Remove duplicate code in mfd, since mfd just register
>> cros_ec_sensorhub if at least one sensor is present
>> - Change iio cros_ec driver to get the pointer to the cros_ec_dev
>> through cros_ec_sensorhub.
>>
>> Signed-off-by: Gwendal Grignou <gwendal@...omium.org>
> FWIW given I don't known the driver that well.
> Looks good to me.
>
> Acked-by: Jonathan Cameron <Jonathan.Cameron@...wei.com>
>
The same from my side
Acked-by: Enric Balletbo i Serra <enric.balletbo@...labora.com>
>> ---
>> Changes in v2:
>> - Remove unerelated changes.
>> - Remove ec presence test in iio driver, done in cros_ec_sensorhub.
>>
>> drivers/iio/accel/cros_ec_accel_legacy.c | 6 -
>> .../common/cros_ec_sensors/cros_ec_sensors.c | 6 -
>> .../cros_ec_sensors/cros_ec_sensors_core.c | 4 +-
>> drivers/iio/light/cros_ec_light_prox.c | 6 -
>> drivers/mfd/cros_ec_dev.c | 203 ++----------------
>> include/linux/platform_data/cros_ec_proto.h | 8 -
>> .../linux/platform_data/cros_ec_sensorhub.h | 8 +
>> 7 files changed, 23 insertions(+), 218 deletions(-)
>>
>> diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
>> index fcc3f999e4827..65f85faf6f31d 100644
>> --- a/drivers/iio/accel/cros_ec_accel_legacy.c
>> +++ b/drivers/iio/accel/cros_ec_accel_legacy.c
>> @@ -163,16 +163,10 @@ static const struct iio_chan_spec cros_ec_accel_legacy_channels[] = {
>> static int cros_ec_accel_legacy_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> - struct cros_ec_dev *ec = dev_get_drvdata(dev->parent);
>> struct iio_dev *indio_dev;
>> struct cros_ec_sensors_core_state *state;
>> int ret;
>>
>> - if (!ec || !ec->ec_dev) {
>> - dev_warn(&pdev->dev, "No EC device found.\n");
>> - return -EINVAL;
>> - }
>> -
>> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
>> if (!indio_dev)
>> return -ENOMEM;
>> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>> index a6987726eeb8a..7dce044734678 100644
>> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
>> @@ -222,17 +222,11 @@ static const struct iio_info ec_sensors_info = {
>> static int cros_ec_sensors_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> - struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
>> struct iio_dev *indio_dev;
>> struct cros_ec_sensors_state *state;
>> struct iio_chan_spec *channel;
>> int ret, i;
>>
>> - if (!ec_dev || !ec_dev->ec_dev) {
>> - dev_warn(&pdev->dev, "No CROS EC device found.\n");
>> - return -EINVAL;
>> - }
>> -
>> indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*state));
>> if (!indio_dev)
>> return -ENOMEM;
>> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
>> index d2609e6feda4d..81a7f692de2f3 100644
>> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
>> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
>> @@ -18,6 +18,7 @@
>> #include <linux/slab.h>
>> #include <linux/platform_data/cros_ec_commands.h>
>> #include <linux/platform_data/cros_ec_proto.h>
>> +#include <linux/platform_data/cros_ec_sensorhub.h>
>> #include <linux/platform_device.h>
>>
>> static char *cros_ec_loc[] = {
>> @@ -88,7 +89,8 @@ int cros_ec_sensors_core_init(struct platform_device *pdev,
>> {
>> struct device *dev = &pdev->dev;
>> struct cros_ec_sensors_core_state *state = iio_priv(indio_dev);
>> - struct cros_ec_dev *ec = dev_get_drvdata(pdev->dev.parent);
>> + struct cros_ec_sensorhub *sensor_hub = dev_get_drvdata(dev->parent);
>> + struct cros_ec_dev *ec = sensor_hub->ec;
>> struct cros_ec_sensor_platform *sensor_platform = dev_get_platdata(dev);
>> u32 ver_mask;
>> int ret, i;
>> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
>> index c5263b563fc19..d85a391e50c59 100644
>> --- a/drivers/iio/light/cros_ec_light_prox.c
>> +++ b/drivers/iio/light/cros_ec_light_prox.c
>> @@ -169,17 +169,11 @@ static const struct iio_info cros_ec_light_prox_info = {
>> static int cros_ec_light_prox_probe(struct platform_device *pdev)
>> {
>> struct device *dev = &pdev->dev;
>> - struct cros_ec_dev *ec_dev = dev_get_drvdata(dev->parent);
>> struct iio_dev *indio_dev;
>> struct cros_ec_light_prox_state *state;
>> struct iio_chan_spec *channel;
>> int ret;
>>
>> - if (!ec_dev || !ec_dev->ec_dev) {
>> - dev_warn(dev, "No CROS EC device found.\n");
>> - return -EINVAL;
>> - }
>> -
>> indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
>> if (!indio_dev)
>> return -ENOMEM;
>> diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
>> index a35104e35cb4e..c4b977a5dd966 100644
>> --- a/drivers/mfd/cros_ec_dev.c
>> +++ b/drivers/mfd/cros_ec_dev.c
>> @@ -78,6 +78,10 @@ static const struct mfd_cell cros_ec_rtc_cells[] = {
>> { .name = "cros-ec-rtc", },
>> };
>>
>> +static const struct mfd_cell cros_ec_sensorhub_cells[] = {
>> + { .name = "cros-ec-sensorhub", },
>> +};
>> +
>> static const struct mfd_cell cros_usbpd_charger_cells[] = {
>> { .name = "cros-usbpd-charger", },
>> { .name = "cros-usbpd-logger", },
>> @@ -117,192 +121,6 @@ static void cros_ec_class_release(struct device *dev)
>> kfree(to_cros_ec_dev(dev));
>> }
>>
>> -static void cros_ec_sensors_register(struct cros_ec_dev *ec)
>> -{
>> - /*
>> - * Issue a command to get the number of sensor reported.
>> - * Build an array of sensors driver and register them all.
>> - */
>> - int ret, i, id, sensor_num;
>> - struct mfd_cell *sensor_cells;
>> - struct cros_ec_sensor_platform *sensor_platforms;
>> - int sensor_type[MOTIONSENSE_TYPE_MAX];
>> - struct ec_params_motion_sense *params;
>> - struct ec_response_motion_sense *resp;
>> - struct cros_ec_command *msg;
>> -
>> - msg = kzalloc(sizeof(struct cros_ec_command) +
>> - max(sizeof(*params), sizeof(*resp)), GFP_KERNEL);
>> - if (msg == NULL)
>> - return;
>> -
>> - msg->version = 2;
>> - msg->command = EC_CMD_MOTION_SENSE_CMD + ec->cmd_offset;
>> - msg->outsize = sizeof(*params);
>> - msg->insize = sizeof(*resp);
>> -
>> - params = (struct ec_params_motion_sense *)msg->data;
>> - params->cmd = MOTIONSENSE_CMD_DUMP;
>> -
>> - ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
>> - if (ret < 0) {
>> - dev_warn(ec->dev, "cannot get EC sensor information: %d/%d\n",
>> - ret, msg->result);
>> - goto error;
>> - }
>> -
>> - resp = (struct ec_response_motion_sense *)msg->data;
>> - sensor_num = resp->dump.sensor_count;
>> - /*
>> - * Allocate 2 extra sensors if lid angle sensor and/or FIFO are needed.
>> - */
>> - sensor_cells = kcalloc(sensor_num + 2, sizeof(struct mfd_cell),
>> - GFP_KERNEL);
>> - if (sensor_cells == NULL)
>> - goto error;
>> -
>> - sensor_platforms = kcalloc(sensor_num,
>> - sizeof(struct cros_ec_sensor_platform),
>> - GFP_KERNEL);
>> - if (sensor_platforms == NULL)
>> - goto error_platforms;
>> -
>> - memset(sensor_type, 0, sizeof(sensor_type));
>> - id = 0;
>> - for (i = 0; i < sensor_num; i++) {
>> - params->cmd = MOTIONSENSE_CMD_INFO;
>> - params->info.sensor_num = i;
>> - ret = cros_ec_cmd_xfer_status(ec->ec_dev, msg);
>> - if (ret < 0) {
>> - dev_warn(ec->dev, "no info for EC sensor %d : %d/%d\n",
>> - i, ret, msg->result);
>> - continue;
>> - }
>> - switch (resp->info.type) {
>> - case MOTIONSENSE_TYPE_ACCEL:
>> - sensor_cells[id].name = "cros-ec-accel";
>> - break;
>> - case MOTIONSENSE_TYPE_BARO:
>> - sensor_cells[id].name = "cros-ec-baro";
>> - break;
>> - case MOTIONSENSE_TYPE_GYRO:
>> - sensor_cells[id].name = "cros-ec-gyro";
>> - break;
>> - case MOTIONSENSE_TYPE_MAG:
>> - sensor_cells[id].name = "cros-ec-mag";
>> - break;
>> - case MOTIONSENSE_TYPE_PROX:
>> - sensor_cells[id].name = "cros-ec-prox";
>> - break;
>> - case MOTIONSENSE_TYPE_LIGHT:
>> - sensor_cells[id].name = "cros-ec-light";
>> - break;
>> - case MOTIONSENSE_TYPE_ACTIVITY:
>> - sensor_cells[id].name = "cros-ec-activity";
>> - break;
>> - default:
>> - dev_warn(ec->dev, "unknown type %d\n", resp->info.type);
>> - continue;
>> - }
>> - sensor_platforms[id].sensor_num = i;
>> - sensor_cells[id].id = sensor_type[resp->info.type];
>> - sensor_cells[id].platform_data = &sensor_platforms[id];
>> - sensor_cells[id].pdata_size =
>> - sizeof(struct cros_ec_sensor_platform);
>> -
>> - sensor_type[resp->info.type]++;
>> - id++;
>> - }
>> -
>> - if (sensor_type[MOTIONSENSE_TYPE_ACCEL] >= 2)
>> - ec->has_kb_wake_angle = true;
>> -
>> - if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE_FIFO)) {
>> - sensor_cells[id].name = "cros-ec-ring";
>> - id++;
>> - }
>> - if (cros_ec_check_features(ec,
>> - EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) {
>> - sensor_cells[id].name = "cros-ec-lid-angle";
>> - id++;
>> - }
>> -
>> - ret = mfd_add_devices(ec->dev, 0, sensor_cells, id,
>> - NULL, 0, NULL);
>> - if (ret)
>> - dev_err(ec->dev, "failed to add EC sensors\n");
>> -
>> - kfree(sensor_platforms);
>> -error_platforms:
>> - kfree(sensor_cells);
>> -error:
>> - kfree(msg);
>> -}
>> -
>> -static struct cros_ec_sensor_platform sensor_platforms[] = {
>> - { .sensor_num = 0 },
>> - { .sensor_num = 1 }
>> -};
>> -
>> -static const struct mfd_cell cros_ec_accel_legacy_cells[] = {
>> - {
>> - .name = "cros-ec-accel-legacy",
>> - .platform_data = &sensor_platforms[0],
>> - .pdata_size = sizeof(struct cros_ec_sensor_platform),
>> - },
>> - {
>> - .name = "cros-ec-accel-legacy",
>> - .platform_data = &sensor_platforms[1],
>> - .pdata_size = sizeof(struct cros_ec_sensor_platform),
>> - }
>> -};
>> -
>> -static void cros_ec_accel_legacy_register(struct cros_ec_dev *ec)
>> -{
>> - struct cros_ec_device *ec_dev = ec->ec_dev;
>> - u8 status;
>> - int ret;
>> -
>> - /*
>> - * ECs that need legacy support are the main EC, directly connected to
>> - * the AP.
>> - */
>> - if (ec->cmd_offset != 0)
>> - return;
>> -
>> - /*
>> - * Check if EC supports direct memory reads and if EC has
>> - * accelerometers.
>> - */
>> - if (ec_dev->cmd_readmem) {
>> - ret = ec_dev->cmd_readmem(ec_dev, EC_MEMMAP_ACC_STATUS, 1,
>> - &status);
>> - if (ret < 0) {
>> - dev_warn(ec->dev, "EC direct read error.\n");
>> - return;
>> - }
>> -
>> - /* Check if EC has accelerometers. */
>> - if (!(status & EC_MEMMAP_ACC_STATUS_PRESENCE_BIT)) {
>> - dev_info(ec->dev, "EC does not have accelerometers.\n");
>> - return;
>> - }
>> - }
>> -
>> - /*
>> - * The device may still support accelerometers:
>> - * it would be an older ARM based device that do not suppor the
>> - * EC_CMD_GET_FEATURES command.
>> - *
>> - * Register 2 accelerometers, we will fail in the IIO driver if there
>> - * are no sensors.
>> - */
>> - ret = mfd_add_hotplug_devices(ec->dev, cros_ec_accel_legacy_cells,
>> - ARRAY_SIZE(cros_ec_accel_legacy_cells));
>> - if (ret)
>> - dev_err(ec_dev->dev, "failed to add EC sensors\n");
>> -}
>> -
>> static int ec_device_probe(struct platform_device *pdev)
>> {
>> int retval = -ENOMEM;
>> @@ -358,11 +176,14 @@ static int ec_device_probe(struct platform_device *pdev)
>> goto failed;
>>
>> /* check whether this EC is a sensor hub. */
>> - if (cros_ec_check_features(ec, EC_FEATURE_MOTION_SENSE))
>> - cros_ec_sensors_register(ec);
>> - else
>> - /* Workaroud for older EC firmware */
>> - cros_ec_accel_legacy_register(ec);
>> + if (cros_ec_get_sensor_count(ec) > 0) {
>> + retval = mfd_add_hotplug_devices(ec->dev,
>> + cros_ec_sensorhub_cells,
>> + ARRAY_SIZE(cros_ec_sensorhub_cells));
>> + if (retval)
>> + dev_err(ec->dev, "failed to add %s subdevice: %d\n",
>> + cros_ec_sensorhub_cells->name, retval);
>> + }
>>
>> /*
>> * The following subdevices can be detected by sending the
>> diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
>> index f3de0662135d5..691f9e953a96a 100644
>> --- a/include/linux/platform_data/cros_ec_proto.h
>> +++ b/include/linux/platform_data/cros_ec_proto.h
>> @@ -168,14 +168,6 @@ struct cros_ec_device {
>> struct platform_device *pd;
>> };
>>
>> -/**
>> - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
>> - * @sensor_num: Id of the sensor, as reported by the EC.
>> - */
>> -struct cros_ec_sensor_platform {
>> - u8 sensor_num;
>> -};
>> -
>> /**
>> * struct cros_ec_platform - ChromeOS EC platform information.
>> * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
>> diff --git a/include/linux/platform_data/cros_ec_sensorhub.h b/include/linux/platform_data/cros_ec_sensorhub.h
>> index 7737685591ad3..c18fba660bb62 100644
>> --- a/include/linux/platform_data/cros_ec_sensorhub.h
>> +++ b/include/linux/platform_data/cros_ec_sensorhub.h
>> @@ -10,6 +10,14 @@
>>
>> #include <linux/platform_data/cros_ec_commands.h>
>>
>> +/**
>> + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
>> + * @sensor_num: Id of the sensor, as reported by the EC.
>> + */
>> +struct cros_ec_sensor_platform {
>> + u8 sensor_num;
>> +};
>> +
>> /*
>> * struct cros_ec_sensorhub - Sensor Hub device data.
>> */
>
Powered by blists - more mailing lists