linux-kernel - [PATCH 4/5] ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191023211504.32675-5-pierre-louis.bossart@linux.intel.com>
Date:   Wed, 23 Oct 2019 16:15:03 -0500
From:   Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
To:     alsa-devel@...a-project.org
Cc:     linux-kernel@...r.kernel.org, tiwai@...e.de, broonie@...nel.org,
        vkoul@...nel.org, gregkh@...uxfoundation.org, jank@...ence.com,
        srinivas.kandagatla@...aro.org, slawomir.blauciak@...el.com,
        Bard liao <yung-chuan.liao@...ux.intel.com>,
        Rander Wang <rander.wang@...ux.intel.com>,
        Ranjani Sridharan <ranjani.sridharan@...ux.intel.com>,
        Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>,
        Liam Girdwood <lgirdwood@...il.com>,
        Jaroslav Kysela <perex@...ex.cz>,
        Takashi Iwai <tiwai@...e.com>,
        YueHaibing <yuehaibing@...wei.com>,
        Zhu Yingjiang <yingjiang.zhu@...ux.intel.com>,
        Kai Vehmanen <kai.vehmanen@...ux.intel.com>,
        Guennadi Liakhovetski <guennadi.liakhovetski@...ux.intel.com>,
        Arnd Bergmann <arnd@...db.de>
Subject: [PATCH 4/5] ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect

For now we have a limited number of machine driver configurations, and
we can detect them based on the link configuration returned after
checking hardware and firmware (BIOS) configurations.

It's likely that in the future we will need to check for _ADR match as
well, which can easily be done by extending the acpi_info structure.

There is a chance that in extreme cases where the BIOS contains too
much information we would need to detect which Slave devices actually
report as 'attached'. This would be more accurate than static
table-based solutions, but it also introduces timing dependencies
since we don't know when those devices might become attached, so will
only be only be looked at if we see limitations with static methods
and the usual quirks based e.g. on DMI information.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
---
 sound/soc/sof/intel/hda.c | 61 ++++++++++++++++++++++++++++++---------
 1 file changed, 48 insertions(+), 13 deletions(-)

diff --git a/sound/soc/sof/intel/hda.c b/sound/soc/sof/intel/hda.c
index 98ac38ca0afa..5f614ec8de1d 100644
--- a/sound/soc/sof/intel/hda.c
+++ b/sound/soc/sof/intel/hda.c
@@ -179,6 +179,9 @@ int hda_sdw_startup(struct snd_sof_dev *sdev)
 
 	hdev = sdev->pdata->hw_pdata;
 
+	if (!hdev->sdw)
+		return 0;
+
 	return sdw_intel_startup(hdev->sdw);
 }
 
@@ -502,11 +505,11 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
 {
 	struct hdac_bus *bus = sof_to_bus(sdev);
 	struct snd_sof_pdata *pdata = sdev->pdata;
+	struct snd_soc_acpi_mach *mach;
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 	struct hdac_ext_link *hlink;
-	struct snd_soc_acpi_mach_params *mach_params;
 	struct snd_soc_acpi_mach *hda_mach;
-	struct snd_soc_acpi_mach *mach;
+	struct snd_soc_acpi_mach_params *mach_params;
 	const char *tplg_filename;
 	const char *idisp_str;
 	const char *dmic_str;
@@ -547,24 +550,56 @@ static int hda_init_caps(struct snd_sof_dev *sdev)
 	/* scan SoundWire capabilities exposed by DSDT */
 	ret = hda_sdw_acpi_scan(sdev);
 	if (ret < 0) {
-		dev_err(sdev->dev, "error: SoundWire ACPI scan error\n");
-		return ret;
+		dev_dbg(sdev->dev, "skipping SoundWire, ACPI scan error\n");
+		goto skip_soundwire;
 	}
 
 	link_mask = hdev->info.link_mask;
 	if (!link_mask) {
-		/*
-		 * probe/allocated SoundWire resources.
-		 * The hardware configuration takes place in hda_sdw_startup
-		 * after power rails are enabled.
-		 */
-		ret = hda_sdw_probe(sdev);
-		if (ret < 0) {
-			dev_err(sdev->dev, "error: SoundWire probe error\n");
-			return ret;
+		dev_dbg(sdev->dev, "skipping SoundWire, no links enabled\n");
+		goto skip_soundwire;
+	}
+
+	/*
+	 * probe/allocate SoundWire resources.
+	 * The hardware configuration takes place in hda_sdw_startup
+	 * after power rails are enabled.
+	 * It's entirely possible to have a mix of I2S/DMIC/SoundWire
+	 * devices, so we allocate the resources in all cases.
+	 */
+	ret = hda_sdw_probe(sdev);
+	if (ret < 0) {
+		dev_err(sdev->dev, "error: SoundWire probe error\n");
+		return ret;
+	}
+
+	/*
+	 * Select SoundWire machine driver if needed using the
+	 * alternate tables. This case deals with SoundWire-only
+	 * machines, for mixed cases with I2C/I2S the detection relies
+	 * on the HID list.
+	 */
+	if (!pdata->machine) {
+		mach = pdata->desc->alt_machines;
+		while (mach && mach->link_mask && mach->link_mask != link_mask)
+			mach++;
+		if (mach && mach->link_mask) {
+			dev_dbg(bus->dev,
+				"SoundWire machine driver %s topology %s\n",
+				mach->drv_name,
+				mach->sof_tplg_filename);
+			pdata->machine = mach;
+			mach->mach_params.platform = dev_name(sdev->dev);
+			pdata->fw_filename = mach->sof_fw_filename;
+			pdata->tplg_filename = mach->sof_tplg_filename;
+		} else {
+			dev_info(sdev->dev,
+				 "No SoundWire machine driver found\n");
 		}
 	}
 
+skip_soundwire:
+
 #if IS_ENABLED(CONFIG_SND_SOC_SOF_HDA)
 	if (bus->mlcap)
 		snd_hdac_ext_bus_get_ml_capabilities(bus);
-- 
2.20.1