| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <SL2P216MB01877D567507333F37629C2D806B0@SL2P216MB0187.KORP216.PROD.OUTLOOK.COM>
Date: Wed, 23 Oct 2019 09:25:46 +0000
From: Nicholas Johnson <nicholas.johnson-opensource@...look.com.au>
To: "mika.westerberg@...ux.intel.com" <mika.westerberg@...ux.intel.com>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-pci@...r.kernel.org" <linux-pci@...r.kernel.org>,
"bhelgaas@...gle.com" <bhelgaas@...gle.com>,
"corbet@....net" <corbet@....net>,
"benh@...nel.crashing.org" <benh@...nel.crashing.org>,
"logang@...tatee.com" <logang@...tatee.com>
Subject: Re: [PATCH v8 5/6] PCI: Add hp_mmio_size and hp_mmio_pref_size
parameters
On Tue, Oct 08, 2019 at 03:16:23PM +0300, mika.westerberg@...ux.intel.com wrote:
> On Fri, Jul 26, 2019 at 12:54:44PM +0000, Nicholas Johnson wrote:
> > Add kernel parameter pci=hpmmiosize=nn[KMG] to set MMIO bridge window
> > size for hotplug bridges.
> >
> > Add kernel parameter pci=hpmmioprefsize=nn[KMG] to set MMIO_PREF bridge
> > window size for hotplug bridges.
> >
> > Leave pci=hpmemsize=nn[KMG] unchanged, to prevent disruptions to
> > existing users. This sets both MMIO and MMIO_PREF to the same size.
> >
> > The two new parameters conform to the style of pci=hpiosize=nn[KMG].
> >
> > Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@...look.com.au>
>
> This does not apply anymore because of 003d3b2c5f83 ("PCI: Make
> pci_hotplug_io_size, mem_size, and bus_size private") so I think you
> need to rebase this on top of current mainline.
Yes, that was the first thing I noticed when doing Linux 5.4. Despite
not posting straight away, I did compile straight away. I did just
re-post this patch on its own (breaking away from the series).
It is nice how I no longer need to modify anything outside of
drivers/pci and Documentation/ directories because of 003d3b2c5f83,
which may make it easier to get signed off. It also means that
re-applying the patch no longer triggers a full kernel recompile.
I should have read the following advice first, but I will make changes
and re-post.
>
> > ---
> > .../admin-guide/kernel-parameters.txt | 9 ++++++-
> > drivers/pci/pci.c | 17 ++++++++++---
> > drivers/pci/setup-bus.c | 25 +++++++++++--------
> > include/linux/pci.h | 3 ++-
> > 4 files changed, 38 insertions(+), 16 deletions(-)
> >
> > diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
> > index 46b826fcb..9bc54cb99 100644
> > --- a/Documentation/admin-guide/kernel-parameters.txt
> > +++ b/Documentation/admin-guide/kernel-parameters.txt
> > @@ -3467,8 +3467,15 @@
> > hpiosize=nn[KMG] The fixed amount of bus space which is
> > reserved for hotplug bridge's IO window.
> > Default size is 256 bytes.
> > + hpmmiosize=nn[KMG] The fixed amount of bus space which is
> > + reserved for hotplug bridge's MMIO window.
> > + Default size is 2 megabytes.
> > + hpmmioprefsize=nn[KMG] The fixed amount of bus space which is
> > + reserved for hotplug bridge's MMIO_PREF window.
> > + Default size is 2 megabytes.
> > hpmemsize=nn[KMG] The fixed amount of bus space which is
> > - reserved for hotplug bridge's memory window.
> > + reserved for hotplug bridge's MMIO and
> > + MMIO_PREF window.
> > Default size is 2 megabytes.
> > hpbussize=nn The minimum amount of additional bus numbers
> > reserved for buses below a hotplug bridge.
> > diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> > index 29ed5ec1a..6b3857cad 100644
> > --- a/drivers/pci/pci.c
> > +++ b/drivers/pci/pci.c
> > @@ -85,10 +85,12 @@ unsigned long pci_cardbus_io_size = DEFAULT_CARDBUS_IO_SIZE;
> > unsigned long pci_cardbus_mem_size = DEFAULT_CARDBUS_MEM_SIZE;
> >
> > #define DEFAULT_HOTPLUG_IO_SIZE (256)
> > -#define DEFAULT_HOTPLUG_MEM_SIZE (2*1024*1024)
> > +#define DEFAULT_HOTPLUG_MMIO_SIZE (2*1024*1024)
> > +#define DEFAULT_HOTPLUG_MMIO_PREF_SIZE (2*1024*1024)
> > /* pci=hpmemsize=nnM,hpiosize=nn can override this */
> > unsigned long pci_hotplug_io_size = DEFAULT_HOTPLUG_IO_SIZE;
> > -unsigned long pci_hotplug_mem_size = DEFAULT_HOTPLUG_MEM_SIZE;
> > +unsigned long pci_hotplug_mmio_size = DEFAULT_HOTPLUG_MMIO_SIZE;
> > +unsigned long pci_hotplug_mmio_pref_size = DEFAULT_HOTPLUG_MMIO_PREF_SIZE;
> >
> > #define DEFAULT_HOTPLUG_BUS_SIZE 1
> > unsigned long pci_hotplug_bus_size = DEFAULT_HOTPLUG_BUS_SIZE;
> > @@ -6281,8 +6283,17 @@ static int __init pci_setup(char *str)
> > pcie_ecrc_get_policy(str + 5);
> > } else if (!strncmp(str, "hpiosize=", 9)) {
> > pci_hotplug_io_size = memparse(str + 9, &str);
> > + } else if (!strncmp(str, "hpmmiosize=", 11)) {
> > + pci_hotplug_mmio_size =
> > + memparse(str + 11, &str);
>
> I would keep this in single line disregarding the 80 char limit.
>
> > + } else if (!strncmp(str, "hpmmioprefsize=", 15)) {
> > + pci_hotplug_mmio_pref_size =
> > + memparse(str + 15, &str);
>
> Ditto
>
> > } else if (!strncmp(str, "hpmemsize=", 10)) {
> > - pci_hotplug_mem_size = memparse(str + 10, &str);
> > + pci_hotplug_mmio_size =
> > + memparse(str + 10, &str);
> Ditto.
>
> > + pci_hotplug_mmio_pref_size =
> > + memparse(str + 10, &str);
>
> Ditto.
>
> > } else if (!strncmp(str, "hpbussize=", 10)) {
> > pci_hotplug_bus_size =
> > simple_strtoul(str + 10, &str, 0);
> > diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c
> > index 7e1dc892a..345ecf16d 100644
> > --- a/drivers/pci/setup-bus.c
> > +++ b/drivers/pci/setup-bus.c
> > @@ -1178,7 +1178,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
> > {
> > struct pci_dev *dev;
> > unsigned long mask, prefmask, type2 = 0, type3 = 0;
> > - resource_size_t additional_mem_size = 0, additional_io_size = 0;
> > + resource_size_t additional_io_size = 0, additional_mmio_size = 0,
> > + additional_mmio_pref_size = 0;
>
> Maybe align them like
>
> resource_size_t additional_io_size = 0, additional_mmio_size = 0,
> additional_mmio_pref_size = 0;
>
> > struct resource *b_res;
> > int ret;
> >
> > @@ -1212,7 +1213,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
> > pci_bridge_check_ranges(bus);
> > if (bus->self->is_hotplug_bridge) {
> > additional_io_size = pci_hotplug_io_size;
> > - additional_mem_size = pci_hotplug_mem_size;
> > + additional_mmio_size = pci_hotplug_mmio_size;
> > + additional_mmio_pref_size = pci_hotplug_mmio_pref_size;
> > }
> > /* Fall through */
> > default:
> > @@ -1230,9 +1232,9 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
> > if (b_res[2].flags & IORESOURCE_MEM_64) {
> > prefmask |= IORESOURCE_MEM_64;
> > ret = pbus_size_mem(bus, prefmask, prefmask,
> > - prefmask, prefmask,
> > - realloc_head ? 0 : additional_mem_size,
> > - additional_mem_size, realloc_head);
> > + prefmask, prefmask,
> > + realloc_head ? 0 : additional_mmio_pref_size,
> > + additional_mmio_pref_size, realloc_head);
> >
> > /*
> > * If successful, all non-prefetchable resources
> > @@ -1254,9 +1256,9 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
> > if (!type2) {
> > prefmask &= ~IORESOURCE_MEM_64;
> > ret = pbus_size_mem(bus, prefmask, prefmask,
> > - prefmask, prefmask,
> > - realloc_head ? 0 : additional_mem_size,
> > - additional_mem_size, realloc_head);
> > + prefmask, prefmask,
> > + realloc_head ? 0 : additional_mmio_pref_size,
> > + additional_mmio_pref_size, realloc_head);
> >
> > /*
> > * If successful, only non-prefetchable resources
> > @@ -1265,7 +1267,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
> > if (ret == 0)
> > mask = prefmask;
> > else
> > - additional_mem_size += additional_mem_size;
> > + additional_mmio_size +=
> > + additional_mmio_pref_size;
>
> Here also looks better if you put them single line.
>
> >
> > type2 = type3 = IORESOURCE_MEM;
> > }
> > @@ -1285,8 +1288,8 @@ void __pci_bus_size_bridges(struct pci_bus *bus, struct list_head *realloc_head)
> > * prefetchable resource in a 64-bit prefetchable window.
> > */
> > pbus_size_mem(bus, mask, IORESOURCE_MEM, type2, type3,
> > - realloc_head ? 0 : additional_mem_size,
> > - additional_mem_size, realloc_head);
> > + realloc_head ? 0 : additional_mmio_size,
> > + additional_mmio_size, realloc_head);
> > break;
> > }
> > }
> > diff --git a/include/linux/pci.h b/include/linux/pci.h
> > index 9e700d9f9..1bde5763a 100644
> > --- a/include/linux/pci.h
> > +++ b/include/linux/pci.h
> > @@ -2031,7 +2031,8 @@ extern u8 pci_dfl_cache_line_size;
> > extern u8 pci_cache_line_size;
> >
> > extern unsigned long pci_hotplug_io_size;
> > -extern unsigned long pci_hotplug_mem_size;
> > +extern unsigned long pci_hotplug_mmio_size;
> > +extern unsigned long pci_hotplug_mmio_pref_size;
> > extern unsigned long pci_hotplug_bus_size;
> >
> > /* Architecture-specific versions may override these (weak) */
> > --
> > 2.22.0
Okay, so basically alignment and ignore the 80-character rule in a heap
of cases. That seems easy enough.
Thanks for reviewing.
Powered by blists - more mailing lists