linux-kernel - Re: [PATCH net-next 4/4] bonding: balance ICMP echoes in layer3+4 mode

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20191023100132.GD8732@netronome.com>
Date:   Wed, 23 Oct 2019 12:01:32 +0200
From:   Simon Horman <simon.horman@...ronome.com>
To:     Matteo Croce <mcroce@...hat.com>
Cc:     netdev@...r.kernel.org, Jay Vosburgh <j.vosburgh@...il.com>,
        Veaceslav Falico <vfalico@...il.com>,
        Andy Gospodarek <andy@...yhouse.net>,
        "David S . Miller " <davem@...emloft.net>,
        Stanislav Fomichev <sdf@...gle.com>,
        Daniel Borkmann <daniel@...earbox.net>,
        Song Liu <songliubraving@...com>,
        Alexei Starovoitov <ast@...nel.org>,
        Paul Blakey <paulb@...lanox.com>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net-next 4/4] bonding: balance ICMP echoes in layer3+4
 mode

On Mon, Oct 21, 2019 at 10:09:48PM +0200, Matteo Croce wrote:
> The bonding uses the L4 ports to balance flows between slaves.
> As the ICMP protocol has no ports, those packets are sent all to the
> same device:
> 
>     # tcpdump -qltnni veth0 ip |sed 's/^/0: /' &
>     # tcpdump -qltnni veth1 ip |sed 's/^/1: /' &
>     # ping -qc1 192.168.0.2
>     1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 315, seq 1, length 64
>     1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 315, seq 1, length 64
>     # ping -qc1 192.168.0.2
>     1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 316, seq 1, length 64
>     1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 316, seq 1, length 64
>     # ping -qc1 192.168.0.2
>     1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 317, seq 1, length 64
>     1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 317, seq 1, length 64
> 
> But some ICMP packets have an Identifier field which is
> used to match packets within sessions, let's use this value in the hash
> function to balance these packets between bond slaves:
> 
>     # ping -qc1 192.168.0.2
>     0: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 303, seq 1, length 64
>     0: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 303, seq 1, length 64
>     # ping -qc1 192.168.0.2
>     1: IP 192.168.0.1 > 192.168.0.2: ICMP echo request, id 304, seq 1, length 64
>     1: IP 192.168.0.2 > 192.168.0.1: ICMP echo reply, id 304, seq 1, length 64
> 
> Signed-off-by: Matteo Croce <mcroce@...hat.com>

I see where this patch is going but it is unclear to me what problem it is
solving. I would expect ICMP traffic to be low volume and thus able to be
handled by a single lower-device of a bond.

...