[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <12a8ace7-f69d-4002-0146-e84a62b8fd69@broadcom.com>
Date: Thu, 24 Oct 2019 13:36:23 -0700
From: Scott Branden <scott.branden@...adcom.com>
To: Chris Packham <chris.packham@...iedtelesis.co.nz>,
linus.walleij@...aro.org, bgolaszewski@...libre.com,
robh+dt@...nel.org, mark.rutland@....com, rjui@...adcom.com,
sbranden@...adcom.com, bcm-kernel-feedback-list@...adcom.com
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v4 0/2] gpio: brcm: XGS iProc GPIO driver
Patch Series looks ok.
On 2019-10-24 1:27 p.m., Chris Packham wrote:
> This is ported this from Broadcom's XLDK (now heavily modified). There seem to
> be 3 different IP blocks for 3 separate banks of GPIOs in the iProc chips.
>
> I've dropped everything except support for the Chip Common A GPIO
> controller because the other blocks actually seem to be supportable with
> other drivers. The driver itself is halfway between pinctrl-nsp-gpio.c
> and pinctrl-iproc-gpio.c.
>
> Chris Packham (2):
> dt-bindings: gpio: brcm: Add bindings for xgs-iproc
> gpio: Add xgs-iproc driver
Acked-by: Scott Branden <scott.branden@...adcom.com>
>
> .../bindings/gpio/brcm,xgs-iproc-gpio.yaml | 70 ++++
> drivers/gpio/Kconfig | 9 +
> drivers/gpio/Makefile | 1 +
> drivers/gpio/gpio-xgs-iproc.c | 321 ++++++++++++++++++
> 4 files changed, 401 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
> create mode 100644 drivers/gpio/gpio-xgs-iproc.c
>
Powered by blists - more mailing lists