linux-kernel - [PATCH v3 4/5] dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 24 Oct 2019 13:14:14 -0700
From:   Florian Fainelli <f.fainelli@...il.com>
To:     linux-kernel@...r.kernel.org
Cc:     Florian Fainelli <f.fainelli@...il.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Jason Cooper <jason@...edaemon.net>,
        Marc Zyngier <maz@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        bcm-kernel-feedback-list@...adcom.com (maintainer:BROADCOM
        BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...),
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS),
        linux-arm-kernel@...ts.infradead.org (moderated list:BROADCOM BCM2835
        ARM ARCHITECTURE)
Subject: [PATCH v3 4/5] dt-bindings: Document brcm,int-fwd-mask property for bcm7038-l1-intc

Indicate that the brcm,int-fwd-mask property is optional and can be set
on platforms which require to leave specific interrupts unmanaged by
Linux and need to retain the firmware configuration.

Acked-by: Rob Herring <robh@...nel.org>
Signed-off-by: Florian Fainelli <f.fainelli@...il.com>
---
 .../bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt  | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
index 4eb043270f5b..5ddef1dc0c1a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm7038-l1-intc.txt
@@ -36,6 +36,12 @@ Optional properties:
 - brcm,irq-can-wake: If present, this means the L1 controller can be used as a
   wakeup source for system suspend/resume.
 
+Optional properties:
+
+- brcm,int-fwd-mask: if present, a bit mask to indicate which interrupts
+  have already been configured by the firmware and should be left unmanaged.
+  This should have one 32-bit word per status/set/clear/mask group.
+
 If multiple reg ranges and interrupt-parent entries are present on an SMP
 system, the driver will allow IRQ SMP affinity to be set up through the
 /proc/irq/ interface.  In the simplest possible configuration, only one
-- 
2.17.1