linux-kernel - [PATCH 4.19 31/93] net/ibmvnic: Fix EOI when running in XIVE mode.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20191027203257.252862748@linuxfoundation.org>
Date:   Sun, 27 Oct 2019 22:00:43 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org,
        CÃ©dric Le Goater <clg@...d.org>,
        "David S. Miller" <davem@...emloft.net>
Subject: [PATCH 4.19 31/93] net/ibmvnic: Fix EOI when running in XIVE mode.

From: "Cédric Le Goater" <clg@...d.org>

[ Upstream commit 11d49ce9f7946dfed4dcf5dbde865c78058b50ab ]

pSeries machines on POWER9 processors can run with the XICS (legacy)
interrupt mode or with the XIVE exploitation interrupt mode. These
interrupt contollers have different interfaces for interrupt
management : XICS uses hcalls and XIVE loads and stores on a page.
H_EOI being a XICS interface the enable_scrq_irq() routine can fail
when the machine runs in XIVE mode.

Fix that by calling the EOI handler of the interrupt chip.

Fixes: f23e0643cd0b ("ibmvnic: Clear pending interrupt after device reset")
Signed-off-by: CÃ©dric Le Goater <clg@...d.org>
Signed-off-by: David S. Miller <davem@...emloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -2731,12 +2731,10 @@ static int enable_scrq_irq(struct ibmvni
 
 	if (adapter->resetting &&
 	    adapter->reset_reason == VNIC_RESET_MOBILITY) {
-		u64 val = (0xff000000) | scrq->hw_irq;
+		struct irq_desc *desc = irq_to_desc(scrq->irq);
+		struct irq_chip *chip = irq_desc_get_chip(desc);
 
-		rc = plpar_hcall_norets(H_EOI, val);
-		if (rc)
-			dev_err(dev, "H_EOI FAILED irq 0x%llx. rc=%ld\n",
-				val, rc);
+		chip->irq_eoi(&desc->irq_data);
 	}
 
 	rc = plpar_hcall_norets(H_VIOCTL, adapter->vdev->unit_address,