| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20191029123426.GB8412@bogus>
Date: Tue, 29 Oct 2019 07:34:26 -0500
From: Rob Herring <robh@...nel.org>
To: Kamel Bouhara <kamel.bouhara@...tlin.com>
Cc: Nicolas Ferre <nicolas.ferre@...rochip.com>,
Alexandre Belloni <alexandre.belloni@...tlin.com>,
Ludovic Desroches <ludovic.desroches@...rochip.com>,
linux-arm-kernel@...ts.infradead.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Kévin RAYMOND <k.raymond@...rkiz.com>,
Mickael GARDET <m.gardet@...rkiz.com>
Subject: Re: [PATCH 2/2] ARM: dts: at91: add a common kizboxmini dtsi file
On Fri, Oct 18, 2019 at 04:03:04PM +0200, Kamel Bouhara wrote:
> Split the Kizbox Mini boards into two board configuration, the
> Kizboxmini Mother board and the Kizboxmini RailDIN board.
>
> Signed-off-by: Kamel Bouhara <kamel.bouhara@...tlin.com>
> Signed-off-by: Kévin RAYMOND <k.raymond@...rkiz.com>
> Signed-off-by: Mickael GARDET <m.gardet@...rkiz.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/at91-kizboxmini-mb.dts | 38 ++++
> arch/arm/boot/dts/at91-kizboxmini-rd.dts | 54 ++++++
> arch/arm/boot/dts/at91-kizboxmini_common.dtsi | 166 ++++++++++++++++++
> 4 files changed, 260 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91-kizboxmini-mb.dts
> create mode 100644 arch/arm/boot/dts/at91-kizboxmini-rd.dts
> create mode 100644 arch/arm/boot/dts/at91-kizboxmini_common.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c976b72a4c94..6b3a65f3f6f8 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -38,6 +38,8 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
> at91-ariettag25.dtb \
> at91-cosino_mega2560.dtb \
> at91-kizboxmini.dtb \
> + at91-kizboxmini-mb.dtb \
> + at91-kizboxmini-rd.dtb \
> at91-wb45n.dtb \
> at91sam9g15ek.dtb \
> at91sam9g25ek.dtb \
> diff --git a/arch/arm/boot/dts/at91-kizboxmini-mb.dts b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
> new file mode 100644
> index 000000000000..52921f547dd6
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-kizboxmini-mb.dts
> @@ -0,0 +1,38 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2015-2018 Overkiz SAS
> + * Author: Mickael Gardet <m.gardet@...rkiz.com>
> + * Kévin Raymond <k.raymond@...rkiz.com>
> + */
> +/dts-v1/;
> +#include "at91-kizboxmini_common.dtsi"
> +
> +/ {
> + model = "Overkiz Kizbox Mini Mother Board";
> + compatible = "overkiz,kizboxmini-mb", "atmel,at91sam9g25",
> + "atmel,at91sam9x5", "atmel,at91sam9";
> +
> + clocks {
> + slow_xtal {
Don't use '_' in node names.
> + clock-frequency = <32768>;
> + };
> + };
> +
> + pwm_leds {
> + blue {
> + label = "pwm:blue:user";
> + pwms = <&pwm0 2 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "none";
> + };
> + };
> +};
> +
> +&usb0 {
> + num-ports = <2>;
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> diff --git a/arch/arm/boot/dts/at91-kizboxmini-rd.dts b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
> new file mode 100644
> index 000000000000..1d2db8e16271
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-kizboxmini-rd.dts
> @@ -0,0 +1,54 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2015-2018 Overkiz SAS
> + * Author: Mickael Gardet <m.gardet@...rkiz.com>
> + * Kévin Raymond <k.raymond@...rkiz.com>
> + */
> +/dts-v1/;
> +#include "at91-kizboxmini_common.dtsi"
> +
> +/ {
> + model = "Overkiz Kizbox Mini RailDIN";
> + compatible = "overkiz,kizboxmini-rd", "atmel,at91sam9g25",
> + "atmel,at91sam9x5", "atmel,at91sam9";
> +
> + clocks {
> + slow_xtal {
> + clock-frequency = <32768>;
> + };
> + adc_op_clk {
> + status = "okay";
> + };
> + };
> +};
> +
> +&pinctrl {
> + adc0 {
> + pinctrl_adc0_ad5: adc0_ad5-0 {
> + /* pull-up disable */
> + atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
> + };
> + };
> +};
> +
> +&usart0 {
> + status = "disabled";
> +};
> +
> +&rtc {
> + status = "okay";
> +};
> +
> +&leds {
> + blue {
> + status = "okay";
> + };
> +};
> +
> +&adc0 {
> + atmel,adc-vref = <2500>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_ad5>;
> + atmel,adc-channels-used = <0x0020>;
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/at91-kizboxmini_common.dtsi b/arch/arm/boot/dts/at91-kizboxmini_common.dtsi
> new file mode 100644
> index 000000000000..2598b776a278
> --- /dev/null
> +++ b/arch/arm/boot/dts/at91-kizboxmini_common.dtsi
> @@ -0,0 +1,166 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
> + *
> + * Copyright (C) 2014-2018 Overkiz SAS
> + * Author: Antoine Aubert <a.aubert@...rkiz.com>
> + * Gaël Portay <g.portay@...rkiz.com>
> + * Kévin Raymond <k.raymond@...rkiz.com>
> + * Dorian Rocipon <d.rocipon@...rkiz.com>
> + */
> +#include "at91sam9g25.dtsi"
> +
> +/ {
> + chosen {
> + bootargs = "ubi.mtd=ubi";
> + stdout-path = &dbgu;
> + };
> +
> + memory {
memory@...00000
Build your dtb with W=12 and fix any new warnings (feel free to fix
existing ones too :) ).
> + reg = <0x20000000 0x8000000>;
> + };
> +
> + clocks {
> + main_xtal {
> + clock-frequency = <12000000>;
> + };
> +
> + adc_op_clk {
> + status = "disabled";
> + };
> + };
> +
> + gpio_keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + prog {
> + label = "PB_PROG";
> + gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
> + linux,code = <0x102>;
> + wakeup-source;
> + };
> +
> + reset {
> + label = "PB_RST";
> + gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
> + linux,code = <0x100>;
> + wakeup-source;
> + };
> + };
> +
> + leds: pwm_leds {
> + compatible = "pwm-leds";
> +
> + blue {
> + label = "pwm:blue:user";
> + pwms = <&pwm0 2 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "none";
> + status = "disabled";
> + };
> +
> + green {
> + label = "pwm:green:user";
> + pwms = <&pwm0 0 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "default-on";
> + };
> +
> + red {
> + label = "pwm:red:user";
> + pwms = <&pwm0 1 10000000 0>;
> + max-brightness = <255>;
> + linux,default-trigger = "default-on";
> + };
> + };
> +};
> +
> +&usart0 {
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + status = "okay";
> +};
> +
> +&macb0 {
> + phy-mode = "rmii";
> + status = "okay";
> +};
> +
> +&pwm0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_pwm0_pwm0_1
> + &pinctrl_pwm0_pwm1_1
> + &pinctrl_pwm0_pwm2_1>;
> + status = "okay";
> +};
> +
> +&dbgu {
> + status = "okay";
> +};
> +
> +&watchdog {
> + status = "okay";
> +};
> +
> +&adc0 {
> + status = "disabled";
> +};
> +
> +&rtc {
> + status = "disabled";
> +};
> +
> +&ebi {
> + pinctrl-0 = <&pinctrl_ebi_addr_nand
> + &pinctrl_ebi_data_0_7>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&nand_controller {
> + status = "okay";
> + pinctrl-0 = <&pinctrl_nand_oe_we
> + &pinctrl_nand_cs
> + &pinctrl_nand_rb>;
> + pinctrl-names = "default";
> +
> + nand@3 {
> + reg = <0x3 0x0 0x800000>;
> + rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
> + cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
> + nand-bus-width = <8>;
> + nand-ecc-mode = "hw";
> + nand-ecc-strength = <4>;
> + nand-ecc-step-size = <512>;
> + nand-on-flash-bbt;
> + label = "atmel_nand";
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + bootstrap@0 {
> + label = "bootstrap";
> + reg = <0x0 0x20000>;
> + };
> +
> + ubi@...00 {
> + label = "ubi";
> + reg = <0x20000 0x7fe0000>;
> + };
> + };
> + };
> +};
> +
> +&usb0 {
> + num-ports = <1>;
> + status = "okay";
> +};
> +
> +&usb1 {
> + status = "okay";
> +};
> +
> --
> 2.23.0
>
Powered by blists - more mailing lists