lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 29 Oct 2019 16:52:49 +0100
From:   Andreas Färber <afaerber@...e.de>
To:     Rob Herring <robh@...nel.org>
Cc:     linux-realtek-soc@...ts.infradead.org,
        linux-arm-kernel@...ts.infradead.org,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] ARM: dts: Prepare Realtek RTD1195 and MeLE X1000

Am 29.10.19 um 16:41 schrieb Rob Herring:
> On Mon, Oct 21, 2019 at 04:10:35AM +0200, Andreas Färber wrote:
>> Add Device Trees for Realtek RTD1195 SoC and MeLE X1000 TV box.
>>
>> Reuse the existing RTD1295 watchdog compatible for now.
>>
>> Signed-off-by: Andreas Färber <afaerber@...e.de>
>> ---
>>  arch/arm/boot/dts/Makefile               |   2 +
>>  arch/arm/boot/dts/rtd1195-mele-x1000.dts |  30 ++++++++
>>  arch/arm/boot/dts/rtd1195.dtsi           | 128 +++++++++++++++++++++++++++++++
>>  3 files changed, 160 insertions(+)
>>  create mode 100644 arch/arm/boot/dts/rtd1195-mele-x1000.dts
>>  create mode 100644 arch/arm/boot/dts/rtd1195.dtsi
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 73d33611c372..89a951485da8 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -858,6 +858,8 @@ dtb-$(CONFIG_ARCH_QCOM) += \
>>  dtb-$(CONFIG_ARCH_RDA) += \
>>  	rda8810pl-orangepi-2g-iot.dtb \
>>  	rda8810pl-orangepi-i96.dtb
>> +dtb-$(CONFIG_ARCH_REALTEK) += \
>> +	rtd1195-mele-x1000.dtb
>>  dtb-$(CONFIG_ARCH_REALVIEW) += \
>>  	arm-realview-pb1176.dtb \
>>  	arm-realview-pb11mp.dtb \
>> diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
>> new file mode 100644
>> index 000000000000..ce9a255950d3
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
>> @@ -0,0 +1,30 @@
>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>> +/*
>> + * Copyright (c) 2017 Andreas Färber
> 
> 2019?

Nope, I am flushing out old queues, and updating SPDX line does not
really warrant a copyright bump IMO. The changes below would though.

>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "rtd1195.dtsi"
>> +
>> +/ {
>> +	compatible = "mele,x1000", "realtek,rtd1195";
>> +	model = "MeLE X1000";
>> +
>> +	aliases {
>> +		serial0 = &uart0;
>> +	};
>> +
>> +	chosen {
>> +		stdout-path = "serial0:115200n8";
>> +	};
>> +
>> +	memory {
> 
> memory@0

Will test.

> 
>> +		device_type = "memory";
>> +		reg = <0x0 0x40000000>;
>> +	};
>> +};
>> +
>> +&uart0 {
>> +	status = "okay";
>> +};
>> diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
>> new file mode 100644
>> index 000000000000..475740c67d26
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rtd1195.dtsi
>> @@ -0,0 +1,128 @@
>> +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
>> +/*
>> + * Copyright (c) 2017 Andreas Färber
>> + */
>> +
>> +/memreserve/ 0x00000000 0x0000c000; /* boot code */
>> +/memreserve/ 0x0000c000 0x000f4000;
>> +/memreserve/ 0x01b00000 0x00400000; /* audio */
>> +/memreserve/ 0x01ffe000 0x00004000; /* rpc ringbuf */
>> +/memreserve/ 0x10000000 0x00100000; /* secure */
>> +/memreserve/ 0x17fff000 0x00001000;
>> +/memreserve/ 0x18000000 0x00100000; /* rbus */
>> +/memreserve/ 0x18100000 0x01000000; /* nor */
> 
> You shouldn't have the same entries here and in /reserved-memory. There 
> was a time before /reserved-memory was fully supported, but we should be 
> well past that now.

I am dealing with a v2012.07 based downstream U-Boot that I do not have
sources for, so I wouldn't be so sure there... It will only respect
memreserve I think, whereas reserved-memory below is for the kernel, no?

>> +
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> +/ {
>> +	compatible = "realtek,rtd1195";
>> +	interrupt-parent = <&gic>;
>> +	#address-cells = <1>;
>> +	#size-cells = <1>;
>> +
>> +	cpus {
>> +		#address-cells = <1>;
>> +		#size-cells = <0>;
>> +
>> +		cpu0: cpu@0 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0x0>;
>> +			clock-frequency = <1000000000>;
>> +		};
>> +
>> +		cpu1: cpu@1 {
>> +			device_type = "cpu";
>> +			compatible = "arm,cortex-a7";
>> +			reg = <0x1>;
>> +			clock-frequency = <1000000000>;
>> +		};
>> +	};
>> +
>> +	reserved-memory {
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		secure@...00000 {
>> +			reg = <0x10000000 0x100000>;
>> +			no-map;
>> +		};
>> +
>> +		rbus@...00000 {
>> +			reg = <0x18000000 0x100000>;
>> +			no-map;
> 
> This doesn't look right as it overlaps the register space. 

Will try dropping it. James?

>> +		};
>> +
>> +		nor@...00000 {
>> +			reg = <0x18100000 0x1000000>;
>> +			no-map;
>> +		};

Same issue here, I guess?

Thanks,
Andreas

>> +	};
>> +
>> +	arm-pmu {
>> +		compatible = "arm,cortex-a7-pmu";
>> +		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
>> +			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
>> +		interrupt-affinity = <&cpu0>, <&cpu1>;
>> +	};
>> +
>> +	timer {
>> +		compatible = "arm,armv7-timer";
>> +		interrupts = <GIC_PPI 13
>> +			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 14
>> +			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 11
>> +			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>,
>> +			     <GIC_PPI 10
>> +			(GIC_CPU_MASK_RAW(0xf) | IRQ_TYPE_LEVEL_LOW)>;
>> +		clock-frequency = <27000000>;
>> +	};
>> +
>> +	osc27M: osc {
>> +		compatible = "fixed-clock";
>> +		clock-frequency = <27000000>;
>> +		#clock-cells = <0>;
>> +		clock-output-names = "osc27M";
>> +	};
>> +
>> +	soc {
>> +		compatible = "simple-bus";
>> +		#address-cells = <1>;
>> +		#size-cells = <1>;
>> +		ranges;
>> +
>> +		wdt: watchdog@...07680 {
>> +			compatible = "realtek,rtd1295-watchdog";
>> +			reg = <0x18007680 0x100>;
>> +			clocks = <&osc27M>;
>> +		};
>> +
>> +		uart0: serial@...07800 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x18007800 0x400>;
>> +			reg-shift = <2>;
>> +			reg-io-width = <4>;
>> +			clock-frequency = <27000000>;
>> +			status = "disabled";
>> +		};
>> +
>> +		uart1: serial@...1b200 {
>> +			compatible = "snps,dw-apb-uart";
>> +			reg = <0x1801b200 0x100>;
>> +			reg-shift = <2>;
>> +			reg-io-width = <4>;
>> +			clock-frequency = <27000000>;
>> +			status = "disabled";
>> +		};
>> +
>> +		gic: interrupt-controller@...11000 {
>> +			compatible = "arm,cortex-a7-gic";
>> +			reg = <0xff011000 0x1000>,
>> +			      <0xff012000 0x2000>;
>> +			interrupt-controller;
>> +			#interrupt-cells = <3>;
>> +		};
>> +	};
>> +};
>> -- 
>> 2.16.4
>>


-- 
SUSE Software Solutions Germany GmbH
Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer
HRB 36809 (AG Nürnberg)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ