lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191029174819.3502-1-michael@walle.cc>
Date:   Tue, 29 Oct 2019 18:48:16 +0100
From:   Michael Walle <michael@...le.cc>
To:     linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        netdev@...r.kernel.org
Cc:     Michael Walle <michael@...le.cc>, Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        "David S. Miller" <davem@...emloft.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Subject: [PATCH 0/3] net: phy: initialize PHYs via device tree properties

I was trying to configure the Atheros PHY for my board. There are fixups
all over the place, for example to enable the 125MHz clock output in almost
any i.MX architecture. Instead of adding another fixup in architecture
specific code, try to provide a generic way to init the PHY registers.

This patch series tries to pick up the "broadcom,reg-init" and
"marvell,reg-init" device tree properties idea and make it a more generic
"reg-init" which is handled by phy_device instead of a particular phy
driver.

Michael Walle (3):
  dt-bindings: net: phy: Add reg-init property
  net: phy: export __phy_{read|write}_page
  net: phy: Use device tree properties to initialize any PHYs

 .../devicetree/bindings/net/ethernet-phy.yaml | 31 ++++++
 MAINTAINERS                                   |  1 +
 drivers/net/phy/phy-core.c                    | 24 ++++-
 drivers/net/phy/phy_device.c                  | 97 ++++++++++++++++++-
 include/dt-bindings/net/phy.h                 | 18 ++++
 include/linux/phy.h                           |  2 +
 6 files changed, 170 insertions(+), 3 deletions(-)
 create mode 100644 include/dt-bindings/net/phy.h

Cc: Andrew Lunn <andrew@...n.ch>
Cc: Florian Fainelli <f.fainelli@...il.com>
Cc: Heiner Kallweit <hkallweit1@...il.com>
Cc: "David S. Miller" <davem@...emloft.net>
Cc: Rob Herring <robh+dt@...nel.org>
Cc: Mark Rutland <mark.rutland@....com>

-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ