Message-ID: <20191030055228.GA9578@___>
Date:   Wed, 30 Oct 2019 13:52:28 +0800
From:   Tiwei Bie <tiwei.bie@...el.com>
To:     Jason Wang <jasowang@...hat.com>
Cc:     mst@...hat.com, alex.williamson@...hat.com,
        maxime.coquelin@...hat.com, linux-kernel@...r.kernel.org,
        kvm@...r.kernel.org, virtualization@...ts.linux-foundation.org,
        netdev@...r.kernel.org, dan.daly@...el.com,
        cunming.liang@...el.com, zhihong.wang@...el.com,
        lingshan.zhu@...el.com
Subject: Re: [PATCH v3] vhost: introduce mdev based hardware backend

On Wed, Oct 30, 2019 at 09:55:57AM +0800, Jason Wang wrote:
> On 2019/10/29 下午6:07, Tiwei Bie wrote:
> > This patch introduces a mdev based hardware vhost backend.
> > This backend is built on top of the same abstraction used
> > in virtio-mdev and provides a generic vhost interface for
> > userspace to accelerate the virtio devices in guest.
> >
> > This backend is implemented as a mdev device driver on top
> > of the same mdev device ops used in virtio-mdev but using
> > a different mdev class id, and it will register the device
> > as a VFIO device for userspace to use. Userspace can setup
> > the IOMMU with the existing VFIO container/group APIs and
> > then get the device fd with the device name. After getting
> > the device fd of this device, userspace can use vhost ioctls
> > to setup the backend.
> 
> 
> Hi Tiwei:
> 
> The patch looks good overall, just few comments & nits.

Thanks for the review! I do appreciate it.

> 
> 
> >
> > Signed-off-by: Tiwei Bie <tiwei.bie@...el.com>
> > ---
> > This patch depends on below series:
> > https://lkml.org/lkml/2019/10/23/614
> >
> > v2 -> v3:
> > - Fix the return value (Jason);
> > - Don't cache unnecessary information in vhost-mdev (Jason);
> > - Get rid of the memset in open (Jason);
> > - Add comments for VHOST_SET_MEM_TABLE, ... (Jason);
> > - Filter out unsupported features in vhost-mdev (Jason);
> > - Add _GET_DEVICE_ID ioctl (Jason);
> > - Add _GET_CONFIG/_SET_CONFIG ioctls (Jason);
> > - Drop _GET_QUEUE_NUM ioctl (Jason);
> > - Fix the copy-paste errors in _IOW/_IOR usage;
> > - Some minor fixes and improvements;
> >
> > v1 -> v2:
> > - Replace _SET_STATE with _SET_STATUS (MST);
> > - Check status bits at each step (MST);
> > - Report the max ring size and max number of queues (MST);
> > - Add missing MODULE_DEVICE_TABLE (Jason);
> > - Only support the network backend w/o multiqueue for now;
> > - Some minor fixes and improvements;
> > - Rebase on top of virtio-mdev series v4;
> >
> > RFC v4 -> v1:
> > - Implement vhost-mdev as a mdev device driver directly and
> >   connect it to VFIO container/group. (Jason);
> > - Pass ring addresses as GPAs/IOVAs in vhost-mdev to avoid
> >   meaningless HVA->GPA translations (Jason);
> >
> > RFC v3 -> RFC v4:
> > - Build vhost-mdev on top of the same abstraction used by
> >   virtio-mdev (Jason);
> > - Introduce vhost fd and pass VFIO fd via SET_BACKEND ioctl (MST);
> >
> > RFC v2 -> RFC v3:
> > - Reuse vhost's ioctls instead of inventing a VFIO regions/irqs
> >   based vhost protocol on top of vfio-mdev (Jason);
> >
> > RFC v1 -> RFC v2:
> > - Introduce a new VFIO device type to build a vhost protocol
> >   on top of vfio-mdev;
> >
> >  drivers/vfio/mdev/mdev_core.c    |  20 ++
> >  drivers/vfio/mdev/mdev_private.h |   1 +
> >  drivers/vhost/Kconfig            |  12 +
> >  drivers/vhost/Makefile           |   3 +
> >  drivers/vhost/mdev.c             | 554 +++++++++++++++++++++++++++++++
> >  include/linux/mdev.h             |   5 +
> >  include/uapi/linux/vhost.h       |  18 +
> >  include/uapi/linux/vhost_types.h |   8 +
> >  8 files changed, 621 insertions(+)
> >  create mode 100644 drivers/vhost/mdev.c
> >
> > diff --git a/drivers/vfio/mdev/mdev_core.c b/drivers/vfio/mdev/mdev_core.c
> > index 9b00c3513120..3cfd787d605c 100644
> > --- a/drivers/vfio/mdev/mdev_core.c
> > +++ b/drivers/vfio/mdev/mdev_core.c
> > @@ -96,6 +96,26 @@ mdev_get_virtio_ops(struct mdev_device *mdev)
> >  }
> >  EXPORT_SYMBOL(mdev_get_virtio_ops);
> >  
> > +/* Specify the vhost device ops for the mdev device, this
> > + * must be called during create() callback for vhost mdev device.
> > + */
> > +void mdev_set_vhost_ops(struct mdev_device *mdev,
> > +			const struct virtio_mdev_device_ops *vhost_ops)
> > +{
> > +	mdev_set_class(mdev, MDEV_CLASS_ID_VHOST);
> > +	mdev->vhost_ops = vhost_ops;
> > +}
> > +EXPORT_SYMBOL(mdev_set_vhost_ops);
> > +
> > +/* Get the vhost device ops for the mdev device. */
> > +const struct virtio_mdev_device_ops *
> > +mdev_get_vhost_ops(struct mdev_device *mdev)
> > +{
> > +	WARN_ON(mdev->class_id != MDEV_CLASS_ID_VHOST);
> > +	return mdev->vhost_ops;
> > +}
> > +EXPORT_SYMBOL(mdev_get_vhost_ops);
> > +
> >  struct device *mdev_dev(struct mdev_device *mdev)
> >  {
> >  	return &mdev->dev;
> > diff --git a/drivers/vfio/mdev/mdev_private.h b/drivers/vfio/mdev/mdev_private.h
> > index 7b47890c34e7..5597c846e52f 100644
> > --- a/drivers/vfio/mdev/mdev_private.h
> > +++ b/drivers/vfio/mdev/mdev_private.h
> > @@ -40,6 +40,7 @@ struct mdev_device {
> >  	union {
> >  		const struct vfio_mdev_device_ops *vfio_ops;
> >  		const struct virtio_mdev_device_ops *virtio_ops;
> > +		const struct virtio_mdev_device_ops *vhost_ops;
> >  	};
> >  };
> >  
> > diff --git a/drivers/vhost/Kconfig b/drivers/vhost/Kconfig
> > index 3d03ccbd1adc..062cada28f89 100644
> > --- a/drivers/vhost/Kconfig
> > +++ b/drivers/vhost/Kconfig
> > @@ -34,6 +34,18 @@ config VHOST_VSOCK
> >  	To compile this driver as a module, choose M here: the module will be called
> >  	vhost_vsock.
> >  
> > +config VHOST_MDEV
> > +	tristate "Vhost driver for Mediated devices"
> > +	depends on EVENTFD && VFIO && VFIO_MDEV
> > +	select VHOST
> > +	default n
> > +	---help---
> > +	This kernel module can be loaded in host kernel to accelerate
> > +	guest virtio devices with the mediated device based backends.
> > +
> > +	To compile this driver as a module, choose M here: the module will
> > +	be called vhost_mdev.
> > +
> >  config VHOST
> >  	tristate
> >  	---help---
> > diff --git a/drivers/vhost/Makefile b/drivers/vhost/Makefile
> > index 6c6df24f770c..ad9c0f8c6d8c 100644
> > --- a/drivers/vhost/Makefile
> > +++ b/drivers/vhost/Makefile
> > @@ -10,4 +10,7 @@ vhost_vsock-y := vsock.o
> >  
> >  obj-$(CONFIG_VHOST_RING) += vringh.o
> >  
> > +obj-$(CONFIG_VHOST_MDEV) += vhost_mdev.o
> > +vhost_mdev-y := mdev.o
> > +
> >  obj-$(CONFIG_VHOST)	+= vhost.o
> > diff --git a/drivers/vhost/mdev.c b/drivers/vhost/mdev.c
> > new file mode 100644
> > index 000000000000..35b2fb33e686
> > --- /dev/null
> > +++ b/drivers/vhost/mdev.c
> > @@ -0,0 +1,554 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Vhost driver for mediated device based backends.
> > + *
> > + * Copyright (C) 2018-2019 Intel Corporation.
> > + *
> > + * Author: Tiwei Bie <tiwei.bie@...el.com>
> > + *
> > + * Thanks to Jason Wang and Michael S. Tsirkin for the valuable
> > + * comments and suggestions.  And thanks to Cunming Liang and
> > + * Zhihong Wang for all their supports.
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mdev.h>
> > +#include <linux/vfio.h>
> > +#include <linux/vhost.h>
> > +#include <linux/virtio_net.h>
> > +#include <linux/virtio_mdev_ops.h>
> > +
> > +#include "vhost.h"
> > +
> > +enum {
> > +	VHOST_MDEV_FEATURES =
> > +		(1ULL << VIRTIO_F_NOTIFY_ON_EMPTY) |
> > +		(1ULL << VIRTIO_F_ANY_LAYOUT) |
> > +		(1ULL << VIRTIO_F_VERSION_1) |
> > +		(1ULL << VIRTIO_F_IOMMU_PLATFORM) |
> > +		(1ULL << VIRTIO_F_RING_PACKED) |
> > +		(1ULL << VIRTIO_F_ORDER_PLATFORM) |
> > +		(1ULL << VIRTIO_RING_F_INDIRECT_DESC) |
> > +		(1ULL << VIRTIO_RING_F_EVENT_IDX),
> > +
> > +	VHOST_MDEV_NET_FEATURES = VHOST_MDEV_FEATURES |
> > +		(1ULL << VIRTIO_NET_F_CSUM) |
> > +		(1ULL << VIRTIO_NET_F_GUEST_CSUM) |
> > +		(1ULL << VIRTIO_NET_F_MTU) |
> > +		(1ULL << VIRTIO_NET_F_MAC) |
> > +		(1ULL << VIRTIO_NET_F_GUEST_TSO4) |
> > +		(1ULL << VIRTIO_NET_F_GUEST_TSO6) |
> > +		(1ULL << VIRTIO_NET_F_GUEST_ECN) |
> > +		(1ULL << VIRTIO_NET_F_GUEST_UFO) |
> > +		(1ULL << VIRTIO_NET_F_HOST_TSO4) |
> > +		(1ULL << VIRTIO_NET_F_HOST_TSO6) |
> > +		(1ULL << VIRTIO_NET_F_HOST_ECN) |
> > +		(1ULL << VIRTIO_NET_F_HOST_UFO) |
> > +		(1ULL << VIRTIO_NET_F_MRG_RXBUF) |
> > +		(1ULL << VIRTIO_NET_F_STATUS) |
> > +		(1ULL << VIRTIO_NET_F_SPEED_DUPLEX),
> > +};
> > +
> > +/* Currently, only network backend w/o multiqueue is supported. */
> > +#define VHOST_MDEV_VQ_MAX	2
> > +
> > +struct vhost_mdev {
> > +	/* The lock is to protect this structure. */
> > +	struct mutex mutex;
> > +	struct vhost_dev dev;
> > +	struct vhost_virtqueue *vqs;
> > +	int nvqs;
> > +	int virtio_id;
> > +	bool opened;
> > +	struct mdev_device *mdev;
> > +};
> > +
> > +static const u64 vhost_mdev_features[] = {
> > +	[VIRTIO_ID_NET] = VHOST_MDEV_NET_FEATURES,
> > +};
> > +
> > +static void handle_vq_kick(struct vhost_work *work)
> > +{
> > +	struct vhost_virtqueue *vq = container_of(work, struct vhost_virtqueue,
> > +						  poll.work);
> > +	struct vhost_mdev *m = container_of(vq->dev, struct vhost_mdev, dev);
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(m->mdev);
> > +
> > +	ops->kick_vq(m->mdev, vq - m->vqs);
> > +}
> > +
> > +static irqreturn_t vhost_mdev_virtqueue_cb(void *private)
> > +{
> > +	struct vhost_virtqueue *vq = private;
> > +	struct eventfd_ctx *call_ctx = vq->call_ctx;
> > +
> > +	if (call_ctx)
> > +		eventfd_signal(call_ctx, 1);
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +static void vhost_mdev_reset(struct vhost_mdev *m)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +
> > +	ops->set_status(mdev, 0);
> > +}
> > +
> > +static long vhost_mdev_get_device_id(struct vhost_mdev *m, u8 __user *argp)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	u32 device_id;
> > +
> > +	device_id = ops->get_device_id(mdev);
> > +
> > +	if (copy_to_user(argp, &device_id, sizeof(device_id)))
> > +		return -EFAULT;
> > +
> > +	return 0;
> > +}
> 
> 
> I believe we need get_vendor_id() as well?

Currently, there is no official way for vendors to do vendor
specific extensions in vhost-mdev yet. It might be better to
add this ioctl when we support this.

> 
> 
> > +
> > +static long vhost_mdev_get_status(struct vhost_mdev *m, u8 __user *statusp)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	u8 status;
> > +
> > +	status = ops->get_status(mdev);
> > +
> > +	if (copy_to_user(statusp, &status, sizeof(status)))
> > +		return -EFAULT;
> > +
> > +	return 0;
> > +}
> > +
> > +static long vhost_mdev_set_status(struct vhost_mdev *m, u8 __user *statusp)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	u8 status;
> > +
> > +	if (copy_from_user(&status, statusp, sizeof(status)))
> > +		return -EFAULT;
> > +
> > +	/*
> > +	 * Userspace shouldn't remove status bits unless reset the
> > +	 * status to 0.
> > +	 */
> > +	if (status != 0 && (ops->get_status(mdev) & ~status) != 0)
> > +		return -EINVAL;
> > +
> > +	ops->set_status(mdev, status);
> > +
> > +	return 0;
> > +}
> > +
> > +static int vhost_mdev_config_validate(struct vhost_mdev *m,
> > +				      struct vhost_mdev_config *c)
> > +{
> > +	long size = 0;
> > +
> > +	switch (m->virtio_id) {
> > +	case VIRTIO_ID_NET:
> > +		size = sizeof(struct virtio_net_config);
> > +		break;
> > +	}
> > +
> > +	if (c->len == 0)
> > +		return -EINVAL;
> > +
> > +	if (c->off >= size || c->len > size || c->off + c->len > size)
> > +		return -E2BIG;
> > +
> > +	return 0;
> > +}
> > +
> > +static long vhost_mdev_get_config(struct vhost_mdev *m,
> > +				  struct vhost_mdev_config __user *c)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	struct vhost_mdev_config config;
> > +	unsigned long size = offsetof(struct vhost_mdev_config, buf);
> > +	u8 *buf;
> > +
> > +	if (copy_from_user(&config, c, size))
> > +		return -EFAULT;
> > +	if (vhost_mdev_config_validate(m, &config))
> > +		return -EINVAL;
> 
> 
> I think it's better to let the parent to do such validation. Especially
> consider that the size of config may depend on feature (e.g MQ).

Above check is just a basic sanity check to make sure
that e.g. we won't alloc a huge amount of memory.

> 
> 
> > +	buf = kvzalloc(config.len, GFP_KERNEL);
> > +	if (!buf)
> > +		return -ENOMEM;
> > +
> > +	ops->get_config(mdev, config.off, buf, config.len);
> > +
> > +	if (copy_to_user(c->buf, buf, config.len)) {
> > +		kvfree(buf);
> > +		return -EFAULT;
> > +	}
> > +
> > +	kvfree(buf);
> > +	return 0;
> > +}
> > +
> > +static long vhost_mdev_set_config(struct vhost_mdev *m,
> > +				  struct vhost_mdev_config __user *c)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	struct vhost_mdev_config config;
> > +	unsigned long size = offsetof(struct vhost_mdev_config, buf);
> > +	u8 *buf;
> > +
> > +	if (copy_from_user(&config, c, size))
> > +		return -EFAULT;
> > +	if (vhost_mdev_config_validate(m, &config))
> > +		return -EINVAL;
> > +	buf = kvzalloc(config.len, GFP_KERNEL);
> > +	if (!buf)
> > +		return -ENOMEM;
> > +
> > +	if (copy_from_user(buf, c->buf, config.len)) {
> > +		kvfree(buf);
> > +		return -EFAULT;
> > +	}
> > +
> > +	ops->set_config(mdev, config.off, buf, config.len);
> > +
> > +	kvfree(buf);
> > +	return 0;
> > +}
> > +
> > +static long vhost_mdev_get_features(struct vhost_mdev *m, u64 __user *featurep)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	u64 features;
> > +
> > +	features = ops->get_features(mdev);
> > +	features &= vhost_mdev_features[m->virtio_id];
> > +
> > +	if (copy_to_user(featurep, &features, sizeof(features)))
> > +		return -EFAULT;
> > +
> > +	return 0;
> > +}
> > +
> > +static long vhost_mdev_set_features(struct vhost_mdev *m, u64 __user *featurep)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	u64 features;
> > +
> > +	/*
> > +	 * It's not allowed to change the features after they have
> > +	 * been negotiated.
> > +	 */
> > +	if (ops->get_status(mdev) & VIRTIO_CONFIG_S_FEATURES_OK)
> > +		return -EBUSY;
> > +
> > +	if (copy_from_user(&features, featurep, sizeof(features)))
> > +		return -EFAULT;
> > +
> > +	if (features & ~vhost_mdev_features[m->virtio_id])
> > +		return -EINVAL;
> > +
> > +	if (ops->set_features(mdev, features))
> > +		return -EINVAL;
> > +
> > +	return 0;
> > +}
> > +
> > +static long vhost_mdev_get_vring_num(struct vhost_mdev *m, u16 __user *argp)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	u16 num;
> > +
> > +	num = ops->get_vq_num_max(mdev);
> > +
> > +	if (copy_to_user(argp, &num, sizeof(num)))
> > +		return -EFAULT;
> > +
> > +	return 0;
> > +}
> > +
> > +static long vhost_mdev_vring_ioctl(struct vhost_mdev *m, unsigned int cmd,
> > +				   void __user *argp)
> > +{
> > +	struct mdev_device *mdev = m->mdev;
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	struct virtio_mdev_callback cb;
> > +	struct vhost_virtqueue *vq;
> > +	struct vhost_vring_state s;
> > +	u8 status;
> > +	u32 idx;
> > +	long r;
> > +
> > +	r = get_user(idx, (u32 __user *)argp);
> > +	if (r < 0)
> > +		return r;
> > +	if (idx >= m->nvqs)
> > +		return -ENOBUFS;
> > +
> > +	status = ops->get_status(mdev);
> > +
> > +	/*
> > +	 * It's not allowed to detect and program vqs before
> > +	 * features negotiation or after enabling driver.
> > +	 */
> > +	if (!(status & VIRTIO_CONFIG_S_FEATURES_OK) ||
> > +	    (status & VIRTIO_CONFIG_S_DRIVER_OK))
> > +		return -EBUSY;
> > +
> > +	vq = &m->vqs[idx];
> > +
> > +	if (cmd == VHOST_MDEV_SET_VRING_ENABLE) {
> > +		if (copy_from_user(&s, argp, sizeof(s)))
> > +			return -EFAULT;
> > +		ops->set_vq_ready(mdev, idx, s.num);
> > +		return 0;
> > +	}
> > +
> > +	/*
> > +	 * It's not allowed to detect and program vqs with
> > +	 * vqs enabled.
> > +	 */
> > +	if (ops->get_vq_ready(mdev, idx))
> > +		return -EBUSY;
> > +
> > +	if (cmd == VHOST_GET_VRING_BASE)
> > +		vq->last_avail_idx = ops->get_vq_state(m->mdev, idx);
> > +
> > +	r = vhost_vring_ioctl(&m->dev, cmd, argp);
> > +	if (r)
> > +		return r;
> > +
> > +	switch (cmd) {
> > +	case VHOST_SET_VRING_ADDR:
> > +		/*
> > +		 * In vhost-mdev, the ring addresses set by userspace should
> > +		 * be the DMA addresses within the VFIO container/group.
> > +		 */
> > +		if (ops->set_vq_address(mdev, idx, (u64)vq->desc,
> > +					(u64)vq->avail, (u64)vq->used))
> > +			r = -ENODEV;
> 
> 
> Nit: It looks to me that we need expose alignment of vq to userspace
> (get_vq_align()).

Guest drivers are using (maybe hardcoded) alignments based
on the alignment requirements defined in the spec. It might
be better to let backends follow the same standard for the
compatibility.

> 
> Thanks
> 
> 
> > +		break;
> > +
> > +	case VHOST_SET_VRING_BASE:
> > +		if (ops->set_vq_state(mdev, idx, vq->last_avail_idx))
> > +			r = -ENODEV;
> > +		break;
> > +
> > +	case VHOST_SET_VRING_CALL:
> > +		if (vq->call_ctx) {
> > +			cb.callback = vhost_mdev_virtqueue_cb;
> > +			cb.private = vq;
> > +		} else {
> > +			cb.callback = NULL;
> > +			cb.private = NULL;
> > +		}
> > +		ops->set_vq_cb(mdev, idx, &cb);
> > +		break;
> > +
> > +	case VHOST_SET_VRING_NUM:
> > +		ops->set_vq_num(mdev, idx, vq->num);
> > +		break;
> > +	}
> > +
> > +	return r;
> > +}
> > +
> > +static int vhost_mdev_open(void *device_data)
> > +{
> > +	struct vhost_mdev *m = device_data;
> > +	struct vhost_dev *dev;
> > +	struct vhost_virtqueue **vqs;
> > +	int nvqs, i, r;
> > +
> > +	if (!try_module_get(THIS_MODULE))
> > +		return -ENODEV;
> > +
> > +	mutex_lock(&m->mutex);
> > +
> > +	if (m->opened) {
> > +		r = -EBUSY;
> > +		goto err;
> > +	}
> > +
> > +	nvqs = m->nvqs;
> > +	vhost_mdev_reset(m);
> > +
> > +	vqs = kmalloc_array(nvqs, sizeof(*vqs), GFP_KERNEL);
> > +	if (!vqs) {
> > +		r = -ENOMEM;
> > +		goto err;
> > +	}
> > +
> > +	dev = &m->dev;
> > +	for (i = 0; i < nvqs; i++) {
> > +		vqs[i] = &m->vqs[i];
> > +		vqs[i]->handle_kick = handle_vq_kick;
> > +	}
> > +	vhost_dev_init(dev, vqs, nvqs, 0, 0, 0);
> > +	m->opened = true;
> > +	mutex_unlock(&m->mutex);
> > +
> > +	return 0;
> > +
> > +err:
> > +	mutex_unlock(&m->mutex);
> > +	module_put(THIS_MODULE);
> > +	return r;
> > +}
> > +
> > +static void vhost_mdev_release(void *device_data)
> > +{
> > +	struct vhost_mdev *m = device_data;
> > +
> > +	mutex_lock(&m->mutex);
> > +	vhost_mdev_reset(m);
> > +	vhost_dev_stop(&m->dev);
> > +	vhost_dev_cleanup(&m->dev);
> > +
> > +	kfree(m->dev.vqs);
> > +	m->opened = false;
> > +	mutex_unlock(&m->mutex);
> > +	module_put(THIS_MODULE);
> > +}
> > +
> > +static long vhost_mdev_unlocked_ioctl(void *device_data,
> > +				      unsigned int cmd, unsigned long arg)
> > +{
> > +	struct vhost_mdev *m = device_data;
> > +	void __user *argp = (void __user *)arg;
> > +	long r;
> > +
> > +	mutex_lock(&m->mutex);
> > +
> > +	switch (cmd) {
> > +	case VHOST_MDEV_GET_DEVICE_ID:
> > +		r = vhost_mdev_get_device_id(m, argp);
> > +		break;
> > +	case VHOST_MDEV_GET_STATUS:
> > +		r = vhost_mdev_get_status(m, argp);
> > +		break;
> > +	case VHOST_MDEV_SET_STATUS:
> > +		r = vhost_mdev_set_status(m, argp);
> > +		break;
> > +	case VHOST_MDEV_GET_CONFIG:
> > +		r = vhost_mdev_get_config(m, argp);
> > +		break;
> > +	case VHOST_MDEV_SET_CONFIG:
> > +		r = vhost_mdev_set_config(m, argp);
> > +		break;
> > +	case VHOST_GET_FEATURES:
> > +		r = vhost_mdev_get_features(m, argp);
> > +		break;
> > +	case VHOST_SET_FEATURES:
> > +		r = vhost_mdev_set_features(m, argp);
> > +		break;
> > +	case VHOST_MDEV_GET_VRING_NUM:
> > +		r = vhost_mdev_get_vring_num(m, argp);
> > +		break;
> > +	default:
> > +		/*
> > +		 * VHOST_SET_MEM_TABLE, VHOST_SET_LOG_BASE, and
> > +		 * VHOST_SET_LOG_FD are not used yet.
> > +		 */
> > +		r = vhost_dev_ioctl(&m->dev, cmd, argp);
> > +		if (r == -ENOIOCTLCMD)
> > +			r = vhost_mdev_vring_ioctl(m, cmd, argp);
> > +	}
> > +
> > +	mutex_unlock(&m->mutex);
> > +	return r;
> > +}
> > +
> > +static const struct vfio_device_ops vfio_vhost_mdev_dev_ops = {
> > +	.name		= "vfio-vhost-mdev",
> > +	.open		= vhost_mdev_open,
> > +	.release	= vhost_mdev_release,
> > +	.ioctl		= vhost_mdev_unlocked_ioctl,
> > +};
> > +
> > +static int vhost_mdev_probe(struct device *dev)
> > +{
> > +	struct mdev_device *mdev = mdev_from_dev(dev);
> > +	const struct virtio_mdev_device_ops *ops = mdev_get_vhost_ops(mdev);
> > +	struct vhost_mdev *m;
> > +	int nvqs, r;
> > +
> > +	/* Currently, we only accept the network devices. */
> > +	if (ops->get_device_id(mdev) != VIRTIO_ID_NET)
> > +		return -ENOTSUPP;
> > +
> > +	if (ops->get_mdev_features(mdev) != VIRTIO_MDEV_F_VERSION_1)
> > +		return -ENOTSUPP;
> > +
> > +	m = devm_kzalloc(dev, sizeof(*m), GFP_KERNEL | __GFP_RETRY_MAYFAIL);
> > +	if (!m)
> > +		return -ENOMEM;
> > +
> > +	nvqs = VHOST_MDEV_VQ_MAX;
> > +
> > +	m->vqs = devm_kmalloc_array(dev, nvqs, sizeof(struct vhost_virtqueue),
> > +				    GFP_KERNEL);
> > +	if (!m->vqs)
> > +		return -ENOMEM;
> > +
> > +	mutex_init(&m->mutex);
> > +
> > +	m->mdev = mdev;
> > +	m->nvqs = nvqs;
> > +	m->virtio_id = ops->get_device_id(mdev);
> > +
> > +	r = vfio_add_group_dev(dev, &vfio_vhost_mdev_dev_ops, m);
> > +	if (r) {
> > +		mutex_destroy(&m->mutex);
> > +		return r;
> > +	}
> > +
> > +	return 0;
> > +}
> > +
> > +static void vhost_mdev_remove(struct device *dev)
> > +{
> > +	struct vhost_mdev *m;
> > +
> > +	m = vfio_del_group_dev(dev);
> > +	mutex_destroy(&m->mutex);
> > +}
> > +
> > +static const struct mdev_class_id vhost_mdev_match[] = {
> > +	{ MDEV_CLASS_ID_VHOST },
> > +	{ 0 },
> > +};
> > +MODULE_DEVICE_TABLE(mdev, vhost_mdev_match);
> > +
> > +static struct mdev_driver vhost_mdev_driver = {
> > +	.name	= "vhost_mdev",
> > +	.probe	= vhost_mdev_probe,
> > +	.remove	= vhost_mdev_remove,
> > +	.id_table = vhost_mdev_match,
> > +};
> > +
> > +static int __init vhost_mdev_init(void)
> > +{
> > +	return mdev_register_driver(&vhost_mdev_driver, THIS_MODULE);
> > +}
> > +module_init(vhost_mdev_init);
> > +
> > +static void __exit vhost_mdev_exit(void)
> > +{
> > +	mdev_unregister_driver(&vhost_mdev_driver);
> > +}
> > +module_exit(vhost_mdev_exit);
> > +
> > +MODULE_VERSION("0.0.1");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_AUTHOR("Intel Corporation");
> > +MODULE_DESCRIPTION("Mediated device based accelerator for virtio");
> > diff --git a/include/linux/mdev.h b/include/linux/mdev.h
> > index 9b69b0bbebfd..3e1e03926355 100644
> > --- a/include/linux/mdev.h
> > +++ b/include/linux/mdev.h
> > @@ -117,6 +117,10 @@ void mdev_set_virtio_ops(struct mdev_device *mdev,
> >  			 const struct virtio_mdev_device_ops *virtio_ops);
> >  const struct virtio_mdev_device_ops *
> >  mdev_get_virtio_ops(struct mdev_device *mdev);
> > +void mdev_set_vhost_ops(struct mdev_device *mdev,
> > +			const struct virtio_mdev_device_ops *vhost_ops);
> > +const struct virtio_mdev_device_ops *
> > +mdev_get_vhost_ops(struct mdev_device *mdev);
> >  
> >  extern struct bus_type mdev_bus_type;
> >  
> > @@ -133,6 +137,7 @@ struct mdev_device *mdev_from_dev(struct device *dev);
> >  enum {
> >  	MDEV_CLASS_ID_VFIO = 1,
> >  	MDEV_CLASS_ID_VIRTIO = 2,
> > +	MDEV_CLASS_ID_VHOST = 3,
> >  	/* New entries must be added here */
> >  };
> >  
> > diff --git a/include/uapi/linux/vhost.h b/include/uapi/linux/vhost.h
> > index 40d028eed645..061a2824a1b3 100644
> > --- a/include/uapi/linux/vhost.h
> > +++ b/include/uapi/linux/vhost.h
> > @@ -116,4 +116,22 @@
> >  #define VHOST_VSOCK_SET_GUEST_CID	_IOW(VHOST_VIRTIO, 0x60, __u64)
> >  #define VHOST_VSOCK_SET_RUNNING		_IOW(VHOST_VIRTIO, 0x61, int)
> >  
> > +/* VHOST_MDEV specific defines */
> > +
> > +/* Get the device id. The device ids follow the same definition of
> > + * the device id defined in virtio-spec. */
> > +#define VHOST_MDEV_GET_DEVICE_ID	_IOR(VHOST_VIRTIO, 0x70, __u32)
> > +/* Get and set the status. The status bits follow the same definition
> > + * of the device status defined in virtio-spec. */
> > +#define VHOST_MDEV_GET_STATUS		_IOR(VHOST_VIRTIO, 0x71, __u8)
> > +#define VHOST_MDEV_SET_STATUS		_IOW(VHOST_VIRTIO, 0x72, __u8)
> > +/* Get and set the device config. The device config follows the same
> > + * definition of the device config defined in virtio-spec. */
> > +#define VHOST_MDEV_GET_CONFIG		_IOR(VHOST_VIRTIO, 0x73, struct vhost_mdev_config)
> > +#define VHOST_MDEV_SET_CONFIG		_IOW(VHOST_VIRTIO, 0x74, struct vhost_mdev_config)
> > +/* Enable/disable the ring. */
> > +#define VHOST_MDEV_SET_VRING_ENABLE	_IOW(VHOST_VIRTIO, 0x75, struct vhost_vring_state)
> > +/* Get the max ring size. */
> > +#define VHOST_MDEV_GET_VRING_NUM	_IOR(VHOST_VIRTIO, 0x76, __u16)
> > +
> >  #endif
> > diff --git a/include/uapi/linux/vhost_types.h b/include/uapi/linux/vhost_types.h
> > index c907290ff065..7b105d0b2fb9 100644
> > --- a/include/uapi/linux/vhost_types.h
> > +++ b/include/uapi/linux/vhost_types.h
> > @@ -119,6 +119,14 @@ struct vhost_scsi_target {
> >  	unsigned short reserved;
> >  };
> >  
> > +/* VHOST_MDEV specific definitions */
> > +
> > +struct vhost_mdev_config {
> > +	__u32 off;
> > +	__u32 len;
> > +	__u8 buf[0];
> > +};
> > +
> >  /* Feature bits */
> >  /* Log all write descriptors. Can be changed while device is active. */
> >  #define VHOST_F_LOG_ALL 26
> 

Powered by blists - more mailing lists