[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20191030094902.32582-1-manivannan.sadhasivam@linaro.org>
Date: Wed, 30 Oct 2019 15:19:00 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: mchehab@...nel.org, robh+dt@...nel.org, sakari.ailus@....fi
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
c.barrett@...mos.com, a.brela@...mos.com, peter.griffin@...aro.org,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH v4 0/2] Add IMX296 CMOS image sensor support
Hello,
This patchset adds support for IMX296 CMOS image sensor from Sony.
Sensor can be programmed through I2C and 4-wire interface but the
current driver only supports I2C interface. The sensor is
capable of outputting frames in CSI2 format (1 Lane). In the case
of sensor resolution, driver only supports 1440x1088 at 30 FPS.
The driver has been validated using Framos IMX296 module interfaced to
96Boards Dragonboard410c.
Thanks,
Mani
Changes in v4:
* Fixed issues related to gain settings and few misc cleanups in driver
* Documented port node and removed maxItems, default prop from dt binding
as per the review
Changes in v3:
* Fixed the reference to video-interfaces.txt in binding.
Changes in v2:
* Switched to YAML binding
Manivannan Sadhasivam (2):
dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
media: i2c: Add IMX296 CMOS image sensor driver
.../devicetree/bindings/media/i2c/imx296.yaml | 94 +++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 11 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx296.c | 715 ++++++++++++++++++
5 files changed, 829 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
create mode 100644 drivers/media/i2c/imx296.c
--
2.17.1
Powered by blists - more mailing lists