[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20191030120105.GA11432@Mani-XPS-13-9360>
Date: Wed, 30 Oct 2019 17:31:05 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Sakari Ailus <sakari.ailus@....fi>
Cc: mchehab@...nel.org, robh+dt@...nel.org,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
c.barrett@...mos.com, a.brela@...mos.com, peter.griffin@...aro.org
Subject: Re: [PATCH v4 1/2] dt-bindings: media: i2c: Add IMX296 CMOS sensor
binding
Hi Sakari,
On Wed, Oct 30, 2019 at 01:53:28PM +0200, Sakari Ailus wrote:
> Hi Nabuvannan,
>
> On Wed, Oct 30, 2019 at 03:19:01PM +0530, Manivannan Sadhasivam wrote:
> > Add YAML devicetree binding for IMX296 CMOS image sensor. Let's also
> > add MAINTAINERS entry for the binding and driver.
> >
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> > ---
> > .../devicetree/bindings/media/i2c/imx296.yaml | 94 +++++++++++++++++++
> > MAINTAINERS | 8 ++
> > 2 files changed, 102 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/media/i2c/imx296.yaml b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > new file mode 100644
> > index 000000000000..c04ec2203268
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/media/i2c/imx296.yaml
> > @@ -0,0 +1,94 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/media/i2c/imx296.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sony IMX296 1/2.8-Inch CMOS Image Sensor
> > +
> > +maintainers:
> > + - Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> > +
> > +description: |-
> > + The Sony IMX296 is a 1/2.9-Inch active pixel type CMOS Solid-state image
> > + sensor with square pixel array and 1.58 M effective pixels. This chip
> > + features a global shutter with variable charge-integration time. It is
> > + programmable through I2C and 4-wire interfaces. The sensor output is
> > + available via CSI-2 serial data output (1 Lane).
> > +
> > +properties:
> > + compatible:
> > + const: sony,imx296
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + maxItems: 1
> > +
> > + clock-names:
> > + description:
> > + Input clock for the sensor.
> > + items:
> > + - const: mclk
> > +
> > + clock-frequency:
> > + description:
> > + Frequency of the mclk clock in Hertz.
> > +
> > + vddo-supply:
> > + description:
> > + Definition of the regulator used as interface power supply.
> > +
> > + vdda-supply:
> > + description:
> > + Definition of the regulator used as analog power supply.
> > +
> > + vddd-supply:
> > + description:
> > + Definition of the regulator used as digital power supply.
> > +
> > + reset-gpios:
> > + description:
> > + The phandle and specifier for the GPIO that controls sensor reset.
> > + maxItems: 1
> > +
> > + port: true
>
> You're missing "type: object" under port.
>
I did that intentionally, since there are other places where I can see the
"type" field not specified. So, I was not sure about that. Most of the
display bindings don't specify "type" and they are most available ones.
I don't think the "port" property differs between cameras and displays.
So I went with that.
Thanks,
Mani
> --
> Regards,
>
> Sakari Ailus
Powered by blists - more mailing lists